Hi Stefan On Tue, Dec 17, 2013 at 2:14 PM, Stefan Roese <s...@denx.de> wrote: > Patch f33b9bd3 > [arm: omap3: Enable clocks for peripherals only if they are used] > breaks SPL booting on Beagleboard. Since some gpio input's are > read to detect the board revision. But with this patch above, the > clocks to the GPIO subsystems are not enabled per default any more. > The GPIO banks need to be configured specifically now. > > Signed-off-by: Stefan Roese <s...@denx.de> > Cc: Tom Rini <tr...@ti.com> > Cc: Michael Trimarchi <mich...@amarulasolutions.com> > --- > include/configs/omap3_beagle.h | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h > index 3acb854..1b566c0 100644 > --- a/include/configs/omap3_beagle.h > +++ b/include/configs/omap3_beagle.h > @@ -123,6 +123,9 @@ > #define CONFIG_USB_ETHER_SMSC95XX > #define CONFIG_USB_ETHER_ASIX > > +/* GPIO banks */ > +#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ > +#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ > > /* commands to include */ > #include <config_cmd_default.h> > -- > 1.8.4.5 >
Ok, this is one of the problem that we can have with the new patch. Thank you Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot