Set correct phy_type value for second USB controller.
This is required for supporting SOCs having 2 USB controllers
working simultaneously, one with UTMI phy and other with ULPI phy
Signed-off-by: Nikhil Badola <b46...@freescale.com>
---
drivers/usb/host/ehci-fsl.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 45e5d6a..0d19daa 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -41,11 +41,14 @@ int ehci_hcd_init(int index, enum usb_init_type init,
struct usb_ehci *ehci = NULL;
const char *phy_type = NULL;
size_t len;
+ char current_usb_controller[5];
#ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
char usb_phy[5];
usb_phy[0] = '\0';
#endif
+ memset(current_usb_controller, '\0', 5);
+ snprintf(current_usb_controller, 4, "usb%d", index+1);
switch (index) {
case 0:
@@ -70,8 +73,9 @@ int ehci_hcd_init(int index, enum usb_init_type init,
out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
/* Init phy */
- if (hwconfig_sub("usb1", "phy_type"))
- phy_type = hwconfig_subarg("usb1", "phy_type", &len);
+ if (hwconfig_sub(current_usb_controller, "phy_type"))
+ phy_type = hwconfig_subarg(current_usb_controller,
+ "phy_type", &len);
else
phy_type = getenv("usb_phy_type");
--
1.7.11.7
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
