Now fimd BPP color mode depends on vl_bpp value in struct "panel_info".
There is only 16BPP mode check, default mode is 24BPP.
Other fimd modes are usually unneeded and also needs some fimd driver
modifications and tests.
Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
---
Changes v2:
- check panel_info vl_bpix when setting fimd color mode
- move boards configs update to another commit.
Changes v3:
- none
Changes v4:
- none
drivers/video/exynos_fimd.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/video/exynos_fimd.c b/drivers/video/exynos_fimd.c
index f962c4f..cebbba7 100644
--- a/drivers/video/exynos_fimd.c
+++ b/drivers/video/exynos_fimd.c
@@ -73,18 +73,19 @@ static void exynos_fimd_set_par(unsigned int win_id)
/* DATAPATH is DMA */
cfg |= EXYNOS_WINCON_DATAPATH_DMA;
- if (pvid->logo_on) /* To get proprietary LOGO */
- cfg |= EXYNOS_WINCON_WSWP_ENABLE;
- else /* To get output console on LCD */
- cfg |= EXYNOS_WINCON_HAWSWP_ENABLE;
+ cfg |= EXYNOS_WINCON_HAWSWP_ENABLE;
/* dma burst is 16 */
cfg |= EXYNOS_WINCON_BURSTLEN_16WORD;
- if (pvid->logo_on) /* To get proprietary LOGO */
- cfg |= EXYNOS_WINCON_BPPMODE_24BPP_888;
- else /* To get output console on LCD */
+ switch (pvid->vl_bpix) {
+ case 4:
cfg |= EXYNOS_WINCON_BPPMODE_16BPP_565;
+ break;
+ default:
+ cfg |= EXYNOS_WINCON_BPPMODE_24BPP_888;
+ break;
+ }
writel(cfg, (unsigned int)&fimd_ctrl->wincon0 +
EXYNOS_WINCON(win_id));
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
