Added macronix flash quad read/write commands support and
it's up to the respective controller driver usecase to
configure the respective commands by defining SPI RX/TX
operation modes from include/spi.h on the driver.
Signed-off-by: Jagannadha Sutradharudu Teki <jaga...@xilinx.com>
---
drivers/mtd/spi/sf_params.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
index ad101fb..4cdb4c2 100644
--- a/drivers/mtd/spi/sf_params.c
+++ b/drivers/mtd/spi/sf_params.c
@@ -40,10 +40,10 @@ const struct spi_flash_params spi_flash_params_table[] = {
{"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0,
0},
{"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0,
0},
{"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0,
0},
- {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, 0,
0},
- {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, 0,
0},
- {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, 0,
0},
- {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, 0,
0},
+ {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, RD_FULL,
WR_QPP},
+ {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, RD_FULL,
WR_QPP},
+ {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL,
WR_QPP},
+ {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, RD_FULL,
WR_QPP},
#endif
#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
{"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0,
0},
--
1.8.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
