Hi Stephen, On Thu, 26 Dec 2013 19:47:19 -0700, Stephen Warren <swar...@wwwdotorg.org> wrote:
> Send RPC commands to the VideoCore to turn on the SDHCI and USB modules. > For SDHCI this isn't needed in practice, since the firmware already > turned on the power in order to load U-Boot. However, it's best to be > explicit. For USB, this is necessary, since the module isn't powered > otherwise. This will allow the kernel USB driver to work. > > Signed-off-by: Stephen Warren <swar...@wwwdotorg.org> > --- > arch/arm/include/asm/arch-bcm2835/mbox.h | 48 > ++++++++++++++++++++++++++++++ > board/raspberrypi/rpi_b/rpi_b.c | 34 ++++++++++++++++++++- > 2 files changed, 81 insertions(+), 1 deletion(-) As there is no history, I am not sure why there were reposts. Are these rebases? pings? Which one should I take in? Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot