> -----Original Message----- > From: FengHua [mailto:feng...@phytium.com.cn] > Sent: Thursday, January 16, 2014 6:47 AM > To: Sharma Bhupesh-B45370 > Cc: u-boot@lists.denx.de; tr...@ti.com; Basu Arnab-B45036 > Subject: Re: RE: [U-Boot] [PATCH] arm64 patch: gicv3 support > > > hi bhupesh, > > > > -----Original Messages----- > > From: "bhupesh.sha...@freescale.com" <bhupesh.sha...@freescale.com> > > Sent Time: 2014-01-15 22:19:02 (Wednesday) > > To: "'feng...@phytium.com.cn'" <feng...@phytium.com.cn>, > > "u-boot@lists.denx.de" <u-boot@lists.denx.de> > > Cc: "tr...@ti.com" <tr...@ti.com>, "arnab.b...@freescale.com" > > <arnab.b...@freescale.com> > > Subject: RE: [U-Boot] [PATCH] arm64 patch: gicv3 support > > > > Hi David, > > > > Thanks for the patch. > > Please see some comments inline: > > > > > -----Original Message----- > > > From: u-boot-boun...@lists.denx.de > > > [mailto:u-boot-boun...@lists.denx.de] > > > On Behalf Of feng...@phytium.com.cn > > > Sent: Wednesday, January 15, 2014 1:41 PM > > > To: u-boot@lists.denx.de > > > Cc: tr...@ti.com > > > Subject: [U-Boot] [PATCH] arm64 patch: gicv3 support > > > > > > From: David Feng <feng...@phytium.com.cn> > > > > > > This patch add gicv3 support to uboot armv8 platform. > > > Modifications cover 4 source files, as follows: > > > gic.S: gicv3 initialization and sgi interrupt raising. > > > goc.h: gicv3 register definitions. > > > > ^^^ > > Typo - gic.h > > > > > vexpress_aemv8a.h: add CONFIG_GICV2/CONFIG_GICV3 switch. > > > start.S: set SCR_EL3.NS bit to 1, gicv3 register of ICC_SRE_EL2 > > > could be accessed only when SCR_EL3.NS=1. > > > set SCR_EL3.IRQ|FIQ|EA bits, reroute all interrupts to > > > el3 at all cores, slaves could be waken up by interrupt > > > only when the interrupt is routed to it when running > > > at el3. > > > > Hmmm. This seems a bit suspicious - if we reroute even IRQs and Aborts > > to the cores which work in EL3, they will not be visible to Linux or > > Hypervisor which work in EL2 or EL1. > > > These bits will be cleared when jumping to el2.
I seem to be missing this clear operation in your patch. Can you please point me to the same. > > Have you tried to launch linux on the ARMv8 foundation model v2 with > these changes? > > > Yes. But I thought we still don't have GICv3 driver in Linux. So did you boot linux with GICv2 or GICv3? > > > > Note: please use the latest gcc 4.8 compiler from linaro > > > which support gicv3 system register assembling. > > > > > > > Two generic comments : > > > > - I see in the Foundation model README that the optional GICv3 is > > supported with memory-mapped CPU interface and distributor, but I see > > your patch accessing them via the sytem register interface (via msr and > mrs). Is this a BUG in the README? > > > The document did not describe it clearly, but actually it support. So this seems to be a documentation BUG, did you provide a feedback to the ARM support folks regarding the same - they should probably fix the documentation. > > Did you check this patch on the latest ARMv8 foundation model - v2? > > > Yes. > > > - Also how about sharing the GICv2 coding between ARMv7 and ARMv8 - > > some of the code may seems like a duplication from the ARMv7 GICv2 > content. > > > Many codes could be shared between armv7 and armv8 such as cache > maintenance and gic. > These need be rearranged seriously. We'd better wait a period of time > before the armv8 codes are more widely acquainted and get more feedback > about this. I agree about the ARMv7/v8 code sharing, but with GICv3 there is an additional problem - it can be configured as GICv2 as well and for the same it would make sense to move common code b/w the CONFIG_GICV2/CONFIG_GICV3 code legs to a common leg. > > > > Signed-off-by: David Feng <feng...@phytium.com.cn> > > > --- > > > arch/arm/cpu/armv8/gic.S | 84 > > > ++++++++++++++++++++++++++++++++++++- > > > arch/arm/cpu/armv8/start.S | 5 ++- > > > arch/arm/include/asm/gic.h | 56 +++++++++++++++++++++++++ > > > include/configs/vexpress_aemv8a.h | 7 ++++ > > > 4 files changed, 150 insertions(+), 2 deletions(-) > > > > > > diff --git a/arch/arm/cpu/armv8/gic.S b/arch/arm/cpu/armv8/gic.S > > > index 599aa8f..a08939a 100644 > > > --- a/arch/arm/cpu/armv8/gic.S > > > +++ b/arch/arm/cpu/armv8/gic.S > > > @@ -23,6 +23,74 @@ > > > * > > > > > > ******************************************************************** > > > ***** > > > / > > > WEAK(gic_init) > > > +#if defined(CONFIG_GICV3) > > > + branch_if_slave x0, 3f > > > + > > > + /* Initialize Distributor */ > > > + ldr x1, =GICD_BASE > > > + mov w0, #0x37 /* EnableGrp0 | EnableGrp1NS */ > > > + /* EnableGrp1S | ARE_S | ARE_NS */ > > > + str w0, [x1, GICD_CTLR] /* Secure GICD_CTLR */ > > > + ldr w0, [x1, GICD_TYPER] > > > + and w2, w0, #0x1f /* ITLinesNumber */ > > > + cbz w2, 1f /* No SPIs */ > > > + add x3, x1, (GICD_IGROUPRn + 4) > > > + add x4, x1, (GICD_IGROUPMODRn + 4) > > > + mov w5, #~0 > > > +0: str w5, [x3], #0x4 > > > + str wzr, [x4], #0x4 /* Config SPIs as Group1NS */ > > > + sub w2, w2, #0x1 > > > + cbnz w2, 0b > > > + > > > + /* Initialize All ReDistributors */ > > > +1: ldr x1, =GICR_BASE > > > +2: mov w0, #~0x2 > > > + ldr w2, [x1, GICR_WAKER] > > > + and w2, w2, w0 /* Clear ProcessorSleep */ > > > + str w2, [x1, GICR_WAKER] > > > + dsb st > > > + isb > > > +0: ldr w0, [x1, GICR_WAKER] > > > + tbnz w0, #2, 0b /* Wait Children be Alive */ > > > + > > > + add x2, x1, #(1 << 16) /* SGI_Base */ > > > + mov w5, #~0 > > > + str w5, [x2, GICR_IGROUPRn] > > > + str wzr, [x2, GICR_IGROUPMODRn] /* SGIs|PPIs Group1NS */ > > > + mov w0, #0x1 /* Enable SGI 0 */ > > > + str w0, [x2, GICR_ISENABLERn] > > > + > > > + ldr w0, [x1, GICR_TYPER] > > > + add x1, x1, #(2 << 16) > > > + tbz w0, #4, 2b /* Next ReDistributor if Exist */ > > > + > > > + /* Initialize Cpu Interface */ > > > +3: mrs x0, ICC_SRE_EL3 > > > + orr x0, x0, #0xf /* SRE & Disable IRQ/FIQ Bypass & */ > > > + /* Allow EL2 access to ICC_SRE_EL2 */ > > > + msr ICC_SRE_EL3, x0 > > > + isb > > > + > > > + mrs x0, ICC_SRE_EL2 > > > + orr x0, x0, #0xf /* SRE & Disable IRQ/FIQ Bypass & */ > > > + /* Allow EL1 access to ICC_SRE_EL1 */ > > > + msr ICC_SRE_EL2, x0 > > > + isb > > > + > > > + mov x0, #0x3 /* EnableGrp1NS | EnableGrp1S */ > > > + msr ICC_IGRPEN1_EL3, x0 > > > + isb > > > + > > > + msr ICC_CTLR_EL3, xzr > > > + isb > > > + > > > + msr ICC_CTLR_EL1, xzr /* NonSecure ICC_CTLR_EL1 */ > > > + isb > > > + > > > + mov x0, #0x1 << 7 /* Non-Secure access to ICC_PMR_EL1 > > > */ > > > + msr ICC_PMR_EL1, x0 > > > + isb > > > +#elif defined(CONFIG_GICV2) > > > branch_if_slave x0, 2f > > > > > > /* Initialize Distributor and SPIs */ @@ -54,7 +122,7 @@ > > > WEAK(gic_init) > > > > > > mov w0, #0x1 << 7 /* Non-Secure access to GICC_PMR */ > > > str w0, [x1, GICC_PMR] > > > - > > > +#endif > > > ret > > > ENDPROC(gic_init) > > > > > > @@ -65,11 +133,18 @@ ENDPROC(gic_init) > > > * > > > > > > ******************************************************************** > > > ***** > > > / > > > WEAK(gic_send_sgi) > > > +#if defined(CONFIG_GICV3) > > > + mov x1, #(1 << 40) > > > + orr x1, x1, x0, lsl #24 > > > + msr ICC_ASGI1R_EL1, x1 > > > + isb > > > +#elif defined(CONFIG_GICV2) > > > ldr x1, =GICD_BASE > > > mov w2, #0x8000 > > > movk w2, #0x100, lsl #16 > > > orr w2, w2, w0 > > > str w2, [x1, GICD_SGIR] > > > +#endif > > > ret > > > ENDPROC(gic_send_sgi) > > > > > > @@ -82,11 +157,18 @@ ENDPROC(gic_send_sgi) > > > * > > > > > > ******************************************************************** > > > ***** > > > / > > > WEAK(wait_for_wakeup) > > > +#if defined(CONFIG_GICV3) > > > +0: wfi > > > + mrs x0, ICC_IAR1_EL1 > > > + msr ICC_EOIR1_EL1, x0 > > > + cbnz x0, 0b > > > +#elif defined(CONFIG_GICV2) > > > ldr x1, =GICC_BASE > > > 0: wfi > > > ldr w0, [x1, GICC_AIAR] > > > str w0, [x1, GICC_AEOIR] > > > cbnz w0, 0b > > > +#endif > > > ret > > > ENDPROC(wait_for_wakeup) > > > > > > diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S > > > index bcc2603..9911817 100644 > > > --- a/arch/arm/cpu/armv8/start.S > > > +++ b/arch/arm/cpu/armv8/start.S > > > @@ -50,7 +50,10 @@ reset: > > > */ > > > adr x0, vectors > > > switch_el x1, 3f, 2f, 1f > > > -3: msr vbar_el3, x0 > > > +3: mrs x0, scr_el3 > > > + orr x0, x0, #0xf /* SCR_EL3.NS|IRQ|FIQ|EA */ > > > + msr scr_el3, x0 > > > + msr vbar_el3, x0 > > > msr cptr_el3, xzr /* Enable FP/SIMD */ > > > ldr x0, =COUNTER_FREQUENCY > > > msr cntfrq_el0, x0 /* Initialize CNTFRQ */ > > > diff --git a/arch/arm/include/asm/gic.h b/arch/arm/include/asm/gic.h > > > index ac2b2bf..bd3a80c 100644 > > > --- a/arch/arm/include/asm/gic.h > > > +++ b/arch/arm/include/asm/gic.h > > > @@ -51,4 +51,60 @@ > > > #define GICC_IIDR 0x00fc > > > #define GICC_DIR 0x1000 > > > > > > +/* ReDistributor Registers for Control and Physical LPIs */ > > > +#define GICR_CTLR 0x0000 > > > +#define GICR_IIDR 0x0004 > > > +#define GICR_TYPER 0x0008 > > > +#define GICR_STATUSR 0x0010 > > > +#define GICR_WAKER 0x0014 > > > +#define GICR_SETLPIR 0x0040 > > > +#define GICR_CLRLPIR 0x0048 > > > +#define GICR_SEIR 0x0068 > > > +#define GICR_PROPBASER 0x0070 > > > +#define GICR_PENDBASER 0x0078 > > > +#define GICR_INVLPIR 0x00a0 > > > +#define GICR_INVALLR 0x00b0 > > > +#define GICR_SYNCR 0x00c0 > > > +#define GICR_MOVLPIR 0x0100 > > > +#define GICR_MOVALLR 0x0110 > > > + > > > +/* ReDistributor Registers for SGIs and PPIs */ > > > +#define GICR_IGROUPRn 0x0080 > > > +#define GICR_ISENABLERn 0x0100 > > > +#define GICR_ICENABLERn 0x0180 > > > +#define GICR_ISPENDRn 0x0200 > > > +#define GICR_ICPENDRn 0x0280 > > > +#define GICR_ISACTIVERn 0x0300 > > > +#define GICR_ICACTIVERn 0x0380 > > > +#define GICR_IPRIORITYRn 0x0400 > > > +#define GICR_ICFGR0 0x0c00 > > > +#define GICR_ICFGR1 0x0c04 > > > +#define GICR_IGROUPMODRn 0x0d00 > > > +#define GICR_NSACRn 0x0e00 > > > + > > > +/* Cpu Interface System Registers */ > > > +#define ICC_IAR0_EL1 S3_0_C12_C8_0 > > > +#define ICC_IAR1_EL1 S3_0_C12_C12_0 > > > +#define ICC_EOIR0_EL1 S3_0_C12_C8_1 > > > +#define ICC_EOIR1_EL1 S3_0_C12_C12_1 > > > +#define ICC_HPPIR0_EL1 S3_0_C12_C8_2 > > > +#define ICC_HPPIR1_EL1 S3_0_C12_C12_2 > > > +#define ICC_BPR0_EL1 S3_0_C12_C8_3 > > > +#define ICC_BPR1_EL1 S3_0_C12_C12_3 > > > +#define ICC_DIR_EL1 S3_0_C12_C11_1 > > > +#define ICC_PMR_EL1 S3_0_C4_C6_0 > > > +#define ICC_RPR_EL1 S3_0_C12_C11_3 > > > +#define ICC_CTLR_EL1 S3_0_C12_C12_4 > > > +#define ICC_CTLR_EL3 S3_6_C12_C12_4 > > > +#define ICC_SRE_EL1 S3_0_C12_C12_5 > > > +#define ICC_SRE_EL2 S3_4_C12_C9_5 > > > +#define ICC_SRE_EL3 S3_6_C12_C12_5 > > > +#define ICC_IGRPEN0_EL1 S3_0_C12_C12_6 > > > +#define ICC_IGRPEN1_EL1 S3_0_C12_C12_7 > > > +#define ICC_IGRPEN1_EL3 S3_6_C12_C12_7 > > > +#define ICC_SEIEN_EL1 S3_0_C12_C13_0 > > > +#define ICC_SGI0R_EL1 S3_0_C12_C11_7 > > > +#define ICC_SGI1R_EL1 S3_0_C12_C11_5 > > > +#define ICC_ASGI1R_EL1 S3_0_C12_C11_6 > > > + > > > #endif /* __GIC_H__ */ > > > diff --git a/include/configs/vexpress_aemv8a.h > > > b/include/configs/vexpress_aemv8a.h > > > index ce5f384..ac67887 100644 > > > --- a/include/configs/vexpress_aemv8a.h > > > +++ b/include/configs/vexpress_aemv8a.h > > > @@ -12,6 +12,8 @@ > > > > > > #define CONFIG_REMAKE_ELF > > > > > > +#define CONFIG_GICV2 > > > + > > > /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/ > > > > > > /*#define CONFIG_SYS_GENERIC_BOARD*/ @@ -93,8 +95,13 @@ > > > #define COUNTER_FREQUENCY (0x1800000) /* 24MHz */ > > > > > > /* Generic Interrupt Controller Definitions */ > > > +#ifdef CONFIG_GICV3 > > > +#define GICD_BASE (0x2f000000) > > > +#define GICR_BASE (0x2f100000) > > > +#else > > > #define GICD_BASE (0x2C001000) > > > #define GICC_BASE (0x2C002000) > > > +#endif > > > > > > #define CONFIG_SYS_MEMTEST_START V2M_BASE > > > #define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000) > > > -- > > > 1.7.9.5 > > > > > > > Regards, > > Bhupesh > > > > > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot