Thank you for that, I had a look at mx6slevk and I can't find any major differences. Solo light is using a fec-light with some extra registers.
Regards, A On Thu, Jan 16, 2014 at 11:05 PM, Fabio Estevam <feste...@gmail.com> wrote: > On Thu, Jan 16, 2014 at 7:37 PM, Andy Ng <andreas2...@gmail.com> wrote: > > Dear colleagues, > > > > I have setup a LAN8720 phy for my imx6Solo/DL custom board but no packets > > coming out. > > I can see 50MHz going into the phy from the REF_OUT Pin of the SOLO, I > can > > read the phy ID using the u-boot MDIO commands > > but when I do ftp or ping nothing comes out. > > We use LAN8720 on mx6slevk, so maybe you can look at it as reference. > > > static void setup_iomux_enet(void) > > { > > imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); > > > > /* Reset LAN8720 PHY */ > > gpio_direction_output(ETH_PHY_RESET, 1); > > udelay(150); > > gpio_set_value(ETH_PHY_RESET, 0); > > udelay(150); > > gpio_set_value(ETH_PHY_RESET, 1); > > udelay(200); > > Writing to zero/delay/write 1 would be enough here. > > Regards, > > Fabio Estevam >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot