On Sun, Jan 19, 2014 at 3:48 PM, Fabio Estevam <feste...@gmail.com> wrote: > Hi Otavio/Andy, > > On Sun, Jan 19, 2014 at 3:07 PM, Otavio Salvador > <ota...@ossystems.com.br> wrote: > >> --- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h >> +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h >> @@ -695,7 +695,7 @@ MX6_PAD_DECL(GPIO_1__GPIO1_IO01, 0x05E0, >> 0x0210, 5, 0x0000, 0, 0) >> MX6_PAD_DECL(GPIO_1__SD1_CD_B, 0x05E0, 0x0210, 6, 0x0000, 0, 0) >> MX6_PAD_DECL(GPIO_16__ESAI_TX3_RX2, 0x05E4, 0x0214, 0, 0x0850, 1, 0) >> MX6_PAD_DECL(GPIO_16__ENET_1588_EVENT2_IN, 0x05E4, 0x0214, 1, 0x0000, >> 0, 0) >> -MX6_PAD_DECL(GPIO_16__ENET_REF_CLK, 0x05E4, 0x0214, 2, 0x080C, 0, 0) >> +MX6_PAD_DECL(GPIO_16__ENET_REF_CLK, 0x05E4, 0x0214, 2 | > > What about adding the SION bit in the board file only? > > Then we would have the same behaviour as in the kernel. > > Please check the hummingboard dts file: > https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi?id=refs/tags/next-20140117
Personally I think when using the ALT 2 people are expecting it works out of box so I think this should be in the PAD declaration. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot