From: Jagannadha Sutradharudu Teki <jagannadha.sutradharudu-t...@xilinx.com>
- Shrink spi_slave {}
- Shrink spi_flash_params {}
- Documentation for sf features
Signed-off-by: Jagannadha Sutradharudu Teki <jaga...@xilinx.com>
Cc: Marek Vasut <ma...@denx.de>
---
doc/SPI/README.sf-features | 122 ++++++++++++++++++++++++++++++
drivers/mtd/spi/sf.c | 4 +-
drivers/mtd/spi/sf_internal.h | 1 -
drivers/mtd/spi/sf_ops.c | 8 +-
drivers/mtd/spi/sf_params.c | 172 +++++++++++++++++++++---------------------
drivers/mtd/spi/sf_probe.c | 71 ++++++++---------
include/spi.h | 42 ++++-------
include/spi_flash.h | 24 +++---
8 files changed, 270 insertions(+), 174 deletions(-)
create mode 100644 doc/SPI/README.sf-features
diff --git a/doc/SPI/README.sf-features b/doc/SPI/README.sf-features
new file mode 100644
index 0000000..d35f56d
--- /dev/null
+++ b/doc/SPI/README.sf-features
@@ -0,0 +1,122 @@
+SPI FLASH feature enhancements:
+==============================
+
+This document describes how to extend the current data structures in spi
subsystem
+for making use of new flash features/operations w.r.t to controller driver
support.
+
+1. spi_slave:
+
+struct spi_slave {
+ ..........
+ u32 mode_bits;
+ ........
+};
+
+@mode_bits can be used to expose the SPI RX/TX operation modes, bus options and
+few flags which are used to extended the flash specific features/operations
+- include/spi.h
+
+mode_bits:
+- SPI_TX_QPP: 4-Wire tx transfer operation quad page program
+- SPI_RX_SLOW: 1-wire rx transfer operation array slow read
+- SPI_RX_DUAL: 2-wire rx transfer operation dual fast read
+- SPI_RX_DUAL_IO: 2-wire rx transfer operation dual io fast read
+- SPI_RX_QUAD: 4-wire rx transfer operation quad fast read
+- SPI_RX_QUAD_IO: 4-wire rx transfer operation quad io fast read
+- SPI_SHARED: dual flash devices are connected in shared bus connection
+- SPI_SEPARATED: dual flash devices are connected in separate bus connection
+- SPI_U_PAGE: select the upper flash in dual flash shared bus connection [1]
+
+2. spi_flash_params:
+
+struct spi_flash_params {
+ ................
+ u16 flags;
+ ..............
+};
+
+@flags can be use to verify the flash supported features/operations with
respect
+to controller driven through @mode_bits and also some internal flash specific
+operations - include/spi_flash.h
+
+flags:
+- SST_WP: SST flash write protection
+- SECT_4K: 4K erase sector
+- SECT_32K: 32 erase sector
+- E_FSR: Flag status register for erase/write for micron < 256MB flash
+- WR_QPP: Quad page program
+- RD_SLOW: Array slow read
+- RD_DUAL: Dual fast read
+- RD_DUAL_IO: Dual IO read
+- RD_QUAD: Quad fast read
+- RD_QUAD_IO: Quad IO read
+- RD_2WIRE: All 2-wire read commands
+- RD_FULL: All read commands
+- ALL_CMDS: All read and write commands [2]
+
+3. spi_flash:
+
+struct spi_flash {
+ ...............
+ u8 dual_flash;
+ u8 shift;
+ u8 poll_cmd;
+ u8 erase_cmd;
+ u8 read_cmd;
+ u8 write_cmd;
+ u8 dummy_byte;
+ ................
+};
+
+Few varibles from spi_flash {} can be used to perform the internal operations
+based on the selected flash features/operations from spi_slave {} and
+spi_flash_params {} - include/spi_flash.h
+
+@dual_flash: flash can be operated in dual flash [3]
+@shift: variable shift operator useful for dual parallel
+@poll_cmd: find the read_status or flag_status for polling erase/write
operations
+@erase_cmd: discovered erase command
+@read_cmd: discovered read command
+@write_cmd: discovered write command
+@dummy_byte: read dummy_byte based on read dummy_cycles.
+
+dummy byte is determined based on the dummy cycles of a particular command.
+Fast commands - dummy_byte = dummy_cycles/8
+I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8
+For I/O commands except cmd[0] everything goes on no.of lines based on
+particular command but in case of fast commands except data all go on
+single line irrespective of command.
+
+4. Usage:
+
+In drivers/spi/*.c assign spi_slave {} with supported features through
mode_bits.
+Ex: drivers/spi/ti_qspi.c
+
+struct ti_qspi_slave {
+ ................
+ struct spi_slave slave;
+ ..............
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ .........
+
+ qslave = spi_alloc_slave(struct ti_qspi_slave, bus, cs);
+ if (!qslave) {
+ printf("SPI_error: Fail to allocate ti_qspi_slave\n");
+ return NULL;
+ }
+
+ qslave->slave.mode_bits = SPI_TX_QPP | SPI_RX_QUAD;
+ ........
+}
+
+[1]
http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf
+[2] http://www.spansion.com/Support/Datasheets/S25FL128S_256S_00.pdf
+[3] doc/SPI/README.dual-flash
+
+--
+Jagannadha Sutradharudu Teki <jaga...@xilinx.com>
+Sat Jan 18 14:44:28 IST 2014
diff --git a/drivers/mtd/spi/sf.c b/drivers/mtd/spi/sf.c
index 664e860..fb91ac6 100644
--- a/drivers/mtd/spi/sf.c
+++ b/drivers/mtd/spi/sf.c
@@ -19,8 +19,8 @@ static int spi_flash_read_write(struct spi_slave *spi,
int ret;
#ifdef CONFIG_SF_DUAL_FLASH
- if (spi->flags & SPI_XFER_U_PAGE)
- flags |= SPI_XFER_U_PAGE;
+ if (spi->mode_bits & SPI_U_PAGE)
+ flags |= SPI_U_PAGE;
#endif
if (data_len == 0)
flags |= SPI_XFER_END;
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 6bcd522..47d5ac2 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -67,7 +67,6 @@
/* SST specific */
#ifdef CONFIG_SPI_FLASH_SST
-# define SST_WP 0x01 /* Supports AAI word program */
# define CMD_SST_BP 0x02 /* Byte Program */
# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word
Program */
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index abdb0ef..e1943a5 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -138,9 +138,9 @@ static void spi_flash_dual_flash(struct spi_flash *flash,
u32 *addr)
case SF_DUAL_STACKED_FLASH:
if (*addr >= (flash->size >> 1)) {
*addr -= flash->size >> 1;
- flash->spi->flags |= SPI_XFER_U_PAGE;
+ flash->spi->mode_bits |= SPI_U_PAGE;
} else {
- flash->spi->flags &= ~SPI_XFER_U_PAGE;
+ flash->spi->mode_bits &= ~SPI_U_PAGE;
}
break;
case SF_DUAL_PARALLEL_FLASH:
@@ -170,8 +170,8 @@ int spi_flash_cmd_wait_ready(struct spi_flash *flash,
unsigned long timeout)
}
#ifdef CONFIG_SF_DUAL_FLASH
- if (spi->flags & SPI_XFER_U_PAGE)
- flags |= SPI_XFER_U_PAGE;
+ if (spi->mode_bits & SPI_U_PAGE)
+ flags |= SPI_U_PAGE;
#endif
ret = spi_xfer(spi, 8, &cmd, NULL, flags);
if (ret) {
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
index eb372b7..9b394f2 100644
--- a/drivers/mtd/spi/sf_params.c
+++ b/drivers/mtd/spi/sf_params.c
@@ -14,106 +14,106 @@
/* SPI/QSPI flash device params structure */
const struct spi_flash_params spi_flash_params_table[] = {
#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */
- {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, 0,
SECT_4K},
- {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, 0,
SECT_4K},
- {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, 0,
SECT_4K},
- {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, 0,
SECT_4K},
- {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, 0,
SECT_4K},
- {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, 0,
SECT_4K},
- {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, 0,
SECT_4K},
- {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, 0,
SECT_4K},
+ {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4,
SECT_4K},
+ {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8,
SECT_4K},
+ {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8,
SECT_4K},
+ {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16,
SECT_4K},
+ {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32,
SECT_4K},
+ {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64,
SECT_4K},
+ {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128,
SECT_4K},
+ {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64,
SECT_4K},
#endif
#ifdef CONFIG_SPI_FLASH_EON /* EON */
- {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0,
0},
- {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, 0,
SECT_4K},
- {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0,
0},
- {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, 0,
0},
+ {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64,
0},
+ {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128,
SECT_4K},
+ {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256,
0},
+ {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128,
0},
#endif
#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */
- {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, 0,
SECT_4K},
- {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, 0,
SECT_4K},
+ {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128,
SECT_4K},
+ {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64,
SECT_4K},
#endif
#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
- {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, 0,
0},
- {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0,
0},
- {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0,
0},
- {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0,
0},
- {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0,
0},
- {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0,
0},
- {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, RD_FULL,
WR_QPP},
- {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, RD_FULL,
WR_QPP},
- {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL,
WR_QPP},
- {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, RD_FULL,
WR_QPP},
+ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4,
0},
+ {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8,
0},
+ {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16,
0},
+ {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32,
0},
+ {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64,
0},
+ {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128,
0},
+ {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256,
ALL_CMDS},
+ {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512,
ALL_CMDS},
+ {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024,
ALL_CMDS},
+ {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256,
ALL_CMDS},
#endif
#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
- {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0,
0},
- {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0,
0},
- {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0,
0},
- {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0,
0},
- {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, RD_FULL,
WR_QPP},
- {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, RD_FULL,
WR_QPP},
- {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, RD_FULL,
WR_QPP},
- {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, RD_FULL,
WR_QPP},
- {"S25FL128S_256K", 0x012018, 0x4d00, 256 * 1024, 64, RD_FULL,
WR_QPP},
- {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, RD_FULL,
WR_QPP},
- {"S25FL256S_256K", 0x010219, 0x4d00, 256 * 1024, 128, RD_FULL,
WR_QPP},
- {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, RD_FULL,
WR_QPP},
- {"S25FL512S_256K", 0x010220, 0x4d00, 256 * 1024, 256, RD_FULL,
WR_QPP},
- {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL,
WR_QPP},
+ {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16,
0},
+ {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32,
0},
+ {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64,
0},
+ {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128,
0},
+ {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64,
ALL_CMDS},
+ {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256,
ALL_CMDS},
+ {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64,
ALL_CMDS},
+ {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128,
ALL_CMDS},
+ {"S25FL128S_256K", 0x012018, 0x4d00, 256 * 1024, 64,
ALL_CMDS},
+ {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256,
ALL_CMDS},
+ {"S25FL256S_256K", 0x010219, 0x4d00, 256 * 1024, 128,
ALL_CMDS},
+ {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512,
ALL_CMDS},
+ {"S25FL512S_256K", 0x010220, 0x4d00, 256 * 1024, 256,
ALL_CMDS},
+ {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024,
ALL_CMDS},
#endif
#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
- {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0,
0},
- {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0,
0},
- {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0,
0},
- {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0,
0},
- {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0,
0},
- {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0,
0},
- {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0,
0},
- {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0,
0},
- {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL,
WR_QPP | SECT_4K},
- {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL,
WR_QPP | SECT_4K},
- {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL,
WR_QPP | SECT_4K},
- {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, RD_FULL,
WR_QPP | SECT_4K},
- {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, RD_FULL,
WR_QPP},
- {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, RD_FULL,
WR_QPP},
- {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, RD_FULL,
WR_QPP | SECT_4K},
- {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, RD_FULL,
WR_QPP | SECT_4K},
- {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, RD_FULL,
WR_QPP | E_FSR | SECT_4K},
- {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, RD_FULL,
WR_QPP | E_FSR | SECT_4K},
- {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, RD_FULL,
WR_QPP | E_FSR | SECT_4K},
- {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL,
WR_QPP | E_FSR | SECT_4K},
+ {"M25P10", 0x202011, 0x0, 32 * 1024, 4,
0},
+ {"M25P20", 0x202012, 0x0, 64 * 1024, 4,
0},
+ {"M25P40", 0x202013, 0x0, 64 * 1024, 8,
0},
+ {"M25P80", 0x202014, 0x0, 64 * 1024, 16,
0},
+ {"M25P16", 0x202015, 0x0, 64 * 1024, 32,
0},
+ {"M25P32", 0x202016, 0x0, 64 * 1024, 64,
0},
+ {"M25P64", 0x202017, 0x0, 64 * 1024, 128,
0},
+ {"M25P128", 0x202018, 0x0, 256 * 1024, 64,
0},
+ {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64,
ALL_CMDS | SECT_4K},
+ {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64,
ALL_CMDS | SECT_4K},
+ {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128,
ALL_CMDS | SECT_4K},
+ {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128,
ALL_CMDS | SECT_4K},
+ {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256,
ALL_CMDS},
+ {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256,
ALL_CMDS},
+ {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512,
ALL_CMDS | SECT_4K},
+ {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512,
ALL_CMDS | SECT_4K},
+ {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, ALL_CMDS |
E_FSR | SECT_4K},
+ {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, ALL_CMDS |
E_FSR | SECT_4K},
+ {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, ALL_CMDS |
E_FSR | SECT_4K},
+ {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, ALL_CMDS |
E_FSR | SECT_4K},
#endif
#ifdef CONFIG_SPI_FLASH_SST /* SST */
- {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, 0,
SECT_4K | SST_WP},
- {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, 0,
SECT_4K | SST_WP},
- {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, 0,
SECT_4K | SST_WP},
- {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, 0,
SECT_4K | SST_WP},
- {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, 0,
SECT_4K},
- {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, 0,
SECT_4K | SST_WP},
- {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, 0,
SECT_4K | SST_WP},
- {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, 0,
SECT_4K | SST_WP},
- {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, 0,
SECT_4K | SST_WP},
- {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, 0,
SECT_4K | SST_WP},
+ {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8,
SECT_4K | SST_WP},
+ {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16,
SECT_4K | SST_WP},
+ {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32,
SECT_4K | SST_WP},
+ {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64,
SECT_4K | SST_WP},
+ {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128,
SECT_4K},
+ {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1,
SECT_4K | SST_WP},
+ {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2,
SECT_4K | SST_WP},
+ {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4,
SECT_4K | SST_WP},
+ {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8,
SECT_4K | SST_WP},
+ {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16,
SECT_4K | SST_WP},
#endif
#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */
- {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0,
0},
- {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0,
0},
- {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0,
0},
- {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, 0,
SECT_4K},
- {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, 0,
SECT_4K},
- {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, 0,
SECT_4K},
- {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, 0,
SECT_4K},
- {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, RD_FULL,
WR_QPP | SECT_4K},
- {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, RD_FULL,
WR_QPP | SECT_4K},
- {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, RD_FULL,
WR_QPP | SECT_4K},
- {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, RD_FULL,
WR_QPP | SECT_4K},
- {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, RD_FULL,
WR_QPP | SECT_4K},
- {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, RD_FULL,
WR_QPP | SECT_4K},
- {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, RD_FULL,
WR_QPP | SECT_4K},
- {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, RD_FULL,
WR_QPP | SECT_4K},
- {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, RD_FULL,
WR_QPP | SECT_4K},
- {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, RD_FULL,
WR_QPP | SECT_4K},
- {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, RD_FULL,
WR_QPP | SECT_4K},
+ {"W25P80", 0xef2014, 0x0, 64 * 1024, 16,
0},
+ {"W25P16", 0xef2015, 0x0, 64 * 1024, 32,
0},
+ {"W25P32", 0xef2016, 0x0, 64 * 1024, 64,
0},
+ {"W25X40", 0xef3013, 0x0, 64 * 1024, 8,
SECT_4K},
+ {"W25X16", 0xef3015, 0x0, 64 * 1024, 32,
SECT_4K},
+ {"W25X32", 0xef3016, 0x0, 64 * 1024, 64,
SECT_4K},
+ {"W25X64", 0xef3017, 0x0, 64 * 1024, 128,
SECT_4K},
+ {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16,
ALL_CMDS | SECT_4K},
+ {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32,
ALL_CMDS | SECT_4K},
+ {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64,
ALL_CMDS | SECT_4K},
+ {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128,
ALL_CMDS | SECT_4K},
+ {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256,
ALL_CMDS | SECT_4K},
+ {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512,
ALL_CMDS | SECT_4K},
+ {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16,
ALL_CMDS | SECT_4K},
+ {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32,
ALL_CMDS | SECT_4K},
+ {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64,
ALL_CMDS | SECT_4K},
+ {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128,
ALL_CMDS | SECT_4K},
+ {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256,
ALL_CMDS | SECT_4K},
#endif
/*
* Note:
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index e84ab13..abde69b 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -19,15 +19,6 @@
DECLARE_GLOBAL_DATA_PTR;
-/* Read commands array */
-static u8 spi_read_cmds_array[] = {
- CMD_READ_ARRAY_SLOW,
- CMD_READ_DUAL_OUTPUT_FAST,
- CMD_READ_DUAL_IO_FAST,
- CMD_READ_QUAD_OUTPUT_FAST,
- CMD_READ_QUAD_IO_FAST,
-};
-
#ifdef CONFIG_SPI_FLASH_MACRONIX
static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
{
@@ -100,7 +91,6 @@ static struct spi_flash *spi_flash_validate_params(struct
spi_slave *spi,
{
const struct spi_flash_params *params;
struct spi_flash *flash;
- u8 cmd;
u16 jedec = idcode[1] << 8 | idcode[2];
u16 ext_jedec = idcode[3] << 8 | idcode[4];
@@ -136,13 +126,13 @@ static struct spi_flash *spi_flash_validate_params(struct
spi_slave *spi,
flash->dual_flash = flash->spi->option;
/* Assign spi_flash ops */
+ flash->read = spi_flash_cmd_read_ops;
+ flash->erase = spi_flash_cmd_erase_ops;
flash->write = spi_flash_cmd_write_ops;
#ifdef CONFIG_SPI_FLASH_SST
if (params->flags & SST_WP)
flash->write = sst_write_wp;
#endif
- flash->erase = spi_flash_cmd_erase_ops;
- flash->read = spi_flash_cmd_read_ops;
/* Compute the flash size */
flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
@@ -166,18 +156,38 @@ static struct spi_flash *spi_flash_validate_params(struct
spi_slave *spi,
flash->erase_size = flash->sector_size;
}
- /* Look for the fastest read cmd */
- cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx);
- if (cmd) {
- cmd = spi_read_cmds_array[cmd - 1];
- flash->read_cmd = cmd;
- } else {
- /* Go for default supported read cmd */
- flash->read_cmd = CMD_READ_ARRAY_FAST;
+ /* Compute read command and dummy_byte */
+ flash->read_cmd = CMD_READ_ARRAY_FAST;
+ flash->dummy_byte = 1;
+ switch (SPI_RX_MODES & flash->spi->mode_bits) {
+ case SPI_RX_SLOW:
+ if (params->flags & RD_SLOW) {
+ flash->read_cmd = CMD_READ_ARRAY_FAST;
+ flash->dummy_byte = 0;
+ }
+ break;
+ case SPI_RX_DUAL:
+ if (params->flags & RD_DUAL)
+ flash->read_cmd = CMD_READ_DUAL_OUTPUT_FAST;
+ break;
+ case SPI_RX_DUAL_IO:
+ if (params->flags & RD_DUAL_IO)
+ flash->read_cmd = CMD_READ_DUAL_IO_FAST;
+ break;
+ case SPI_RX_QUAD:
+ if (params->flags & RD_QUAD)
+ flash->read_cmd = CMD_READ_QUAD_OUTPUT_FAST;
+ break;
+ case SPI_RX_QUAD_IO:
+ if (params->flags & RD_QUAD_IO) {
+ flash->read_cmd = CMD_READ_QUAD_IO_FAST;
+ flash->dummy_byte = 2;
+ }
+ break;
}
/* Not require to look for fastest only two write cmds yet */
- if (params->flags & WR_QPP && flash->spi->op_mode_tx & SPI_OPM_TX_QPP)
+ if (flash->spi->mode_bits & SPI_TX_QPP && params->flags & WR_QPP)
flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
else
/* Go for default supported write cmd */
@@ -193,25 +203,6 @@ static struct spi_flash *spi_flash_validate_params(struct
spi_slave *spi,
}
}
- /* Read dummy_byte: dummy byte is determined based on the
- * dummy cycles of a particular command.
- * Fast commands - dummy_byte = dummy_cycles/8
- * I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8
- * For I/O commands except cmd[0] everything goes on no.of lines
- * based on particular command but incase of fast commands except
- * data all go on single line irrespective of command.
- */
- switch (flash->read_cmd) {
- case CMD_READ_QUAD_IO_FAST:
- flash->dummy_byte = 2;
- break;
- case CMD_READ_ARRAY_SLOW:
- flash->dummy_byte = 0;
- break;
- default:
- flash->dummy_byte = 1;
- }
-
/* Poll cmd selection */
flash->poll_cmd = CMD_READ_STATUS;
#ifdef CONFIG_SPI_FLASH_STMICRO
diff --git a/include/spi.h b/include/spi.h
index ffd6647..45a3094 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -30,29 +30,23 @@
#define SPI_XFER_MMAP 0x08 /* Memory Mapped start */
#define SPI_XFER_MMAP_END 0x10 /* Memory Mapped End */
#define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END)
-#define SPI_XFER_U_PAGE (1 << 5)
-
-/* SPI TX operation modes */
-#define SPI_OPM_TX_QPP 1 << 0
-
-/* SPI RX operation modes */
-#define SPI_OPM_RX_AS 1 << 0
-#define SPI_OPM_RX_DOUT 1 << 1
-#define SPI_OPM_RX_DIO 1 << 2
-#define SPI_OPM_RX_QOF 1 << 3
-#define SPI_OPM_RX_QIOF 1 << 4
-#define SPI_OPM_RX_EXTN SPI_OPM_RX_AS | SPI_OPM_RX_DOUT | \
- SPI_OPM_RX_DIO | SPI_OPM_RX_QOF | \
- SPI_OPM_RX_QIOF
-
-/* SPI bus connection options */
-#define SPI_CONN_DUAL_SHARED 1 << 0
-#define SPI_CONN_DUAL_SEPARATED 1 << 1
/* Header byte that marks the start of the message */
#define SPI_PREAMBLE_END_BYTE 0xec
+#define SPI_DEFAULT_WORDLEN 8
-#define SPI_DEFAULT_WORDLEN 8
+/* SPI mode bits */
+#define SPI_TX_QPP 1 << 0
+#define SPI_RX_SLOW 1 << 1
+#define SPI_RX_DUAL 1 << 2
+#define SPI_RX_DUAL_IO 1 << 3
+#define SPI_RX_QUAD 1 << 4
+#define SPI_RX_QUAD_IO 1 << 5
+#define SPI_RX_MODES (SPI_RX_SLOW | SPI_RX_DUAL | SPI_RX_DUAL_IO | \
+ SPI_RX_QUAD | SPI_RX_QUAD_IO)
+#define SPI_SHARED 1 << 6
+#define SPI_SEPARATED 1 << 7
+#define SPI_U_PAGE 1 << 8
/**
* struct spi_slave - Representation of a SPI slave
@@ -61,25 +55,19 @@
*
* @bus: ID of the bus that the slave is attached to.
* @cs: ID of the chip select connected to the slave.
- * @op_mode_rx: SPI RX operation mode.
- * @op_mode_tx: SPI TX operation mode.
* @wordlen: Size of SPI word in number of bits
* @max_write_size: If non-zero, the maximum number of bytes which can
* be written at once, excluding command bytes.
+ * @mode_bits: SPI RX/TX operation modes, bus options and few flags.
* @memory_map: Address of read-only SPI flash access.
- * @option: Varies SPI bus options - separate, shared bus.
- * @flags: Indication of SPI flags.
*/
struct spi_slave {
unsigned int bus;
unsigned int cs;
- u8 op_mode_rx;
- u8 op_mode_tx;
unsigned int wordlen;
unsigned int max_write_size;
+ u16 mode_bits;
void *memory_map;
- u8 option;
- u8 flags;
};
/**
diff --git a/include/spi_flash.h b/include/spi_flash.h
index f79f0ea..16ca294 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -20,21 +20,19 @@
#include <linux/compiler.h>
/* sf param flags */
+#define SST_WP 1 << 0
#define SECT_4K 1 << 1
#define SECT_32K 1 << 2
#define E_FSR 1 << 3
#define WR_QPP 1 << 4
-
-/* Enum list - Full read commands */
-enum spi_read_cmds {
- ARRAY_SLOW = 1 << 0,
- DUAL_OUTPUT_FAST = 1 << 1,
- DUAL_IO_FAST = 1 << 2,
- QUAD_OUTPUT_FAST = 1 << 3,
- QUAD_IO_FAST = 1 << 4,
-};
-#define RD_EXTN ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST
-#define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST
+#define RD_SLOW 1 << 5
+#define RD_DUAL 1 << 6
+#define RD_DUAL_IO 1 << 7
+#define RD_QUAD 1 << 8
+#define RD_QUAD_IO 1 << 9
+#define RD_2WIRE (RD_SLOW | RD_DUAL | RD_DUAL_IO)
+#define RD_FULL (RD_2WIRE | RD_QUAD | RD_QUAD_IO)
+#define ALL_CMDS (WR_QPP | RD_FULL)
/* Dual SPI flash memories */
enum spi_dual_flash {
@@ -51,8 +49,7 @@ enum spi_dual_flash {
* @ext_jedec: Device ext_jedec ID
* @sector_size: Sector size of this device
* @nr_sectors: No.of sectors on this device
- * @e_rd_cmd: Enum list for read commands
- * @flags: Importent param, for flash specific behaviour
+ * @flags: Importent params, for flash specific behaviour
*/
struct spi_flash_params {
const char *name;
@@ -60,7 +57,6 @@ struct spi_flash_params {
u16 ext_jedec;
u32 sector_size;
u32 nr_sectors;
- u8 e_rd_cmd;
u16 flags;
};
--
1.8.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
