On 21.01.2014, at 03:25, Scott Wood <scottw...@freescale.com> wrote:
> On Sun, 2014-01-19 at 16:19 +0100, Alexander Graf wrote:
>> For KVM we have a special PV machine type called "ppce500". This machine
>> is inspired by the MPC8544DS board, but implements a lot less features
>> than that one.
>>
>> It also provides more PCI slots and is supposed to be enumerated by
>> device tree only.
>>
>> This patch adds support for the current generation ppce500 machine as
>> it is implemented today.
>>
>> Signed-off-by: Alexander Graf <ag...@suse.de>
>> ---
>> arch/powerpc/cpu/mpc85xx/start.S | 7 +
>> arch/powerpc/include/asm/config_mpc85xx.h | 4 +
>> board/freescale/qemu-ppce500/Makefile | 10 ++
>> board/freescale/qemu-ppce500/qemu-ppce500.c | 260
>> +++++++++++++++++++++++++++
>> board/freescale/qemu-ppce500/tlb.c | 59 ++++++
>> boards.cfg | 1 +
>> include/configs/qemu-ppce500.h | 235 ++++++++++++++++++++++++
>> 7 files changed, 576 insertions(+)
>> create mode 100644 board/freescale/qemu-ppce500/Makefile
>> create mode 100644 board/freescale/qemu-ppce500/qemu-ppce500.c
>> create mode 100644 board/freescale/qemu-ppce500/tlb.c
>> create mode 100644 include/configs/qemu-ppce500.h
>>
>> diff --git a/arch/powerpc/cpu/mpc85xx/start.S
>> b/arch/powerpc/cpu/mpc85xx/start.S
>> index db84d10..ccbcc03 100644
>> --- a/arch/powerpc/cpu/mpc85xx/start.S
>> +++ b/arch/powerpc/cpu/mpc85xx/start.S
>> @@ -80,6 +80,13 @@ _start_e500:
>> li r1,MSR_DE
>> mtmsr r1
>>
>> +#ifdef CONFIG_QEMU_E500
>> + /* Save our ePAPR device tree off before we clobber it */
>> + lis r2, CONFIG_QEMU_DT_ADDR@h
>> + ori r2, r2, CONFIG_QEMU_DT_ADDR@l
>> + stw r3, 0(r2)
>> +#endif
>
> r2 has a special purpose -- please don't use it for other things, even
> if it's too early to be a problem and other code is similarly bad.
Heh, ok. I'll use r4 instead.
> Instead of saving the DT pointer in some random hardcoded address, how
> about sticking it in a callee-saved register until you're able to store
> it in the global data struct?
I did that at first but that didn't survive relocation. However, I just
remembered that I had my global variable in bss, so maybe relocation doesn't
work properly there. Instead I put it in .data now and that seems to work.
It's certainly the nicer solution, I agree.
>
>> diff --git a/arch/powerpc/include/asm/config_mpc85xx.h
>> b/arch/powerpc/include/asm/config_mpc85xx.h
>> index 54ce2f0..a0ab453 100644
>> --- a/arch/powerpc/include/asm/config_mpc85xx.h
>> +++ b/arch/powerpc/include/asm/config_mpc85xx.h
>> @@ -776,6 +776,10 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
>> #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
>> #define CONFIG_SYS_FSL_ERRATUM_A005125
>>
>> +#elif defined(CONFIG_QEMU_E500)
>> +#define CONFIG_MAX_CPUS 1
>> +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xe0000000
>
> This is supposed to come from the device tree. We will want to change
> that address eventually to support larger guest memory.
That's a lot easier said than done. There is a lot of code in u-boot that puts
the CCSRBAR or addresses derived from CCSRBAR into arrays which fails miserably
when you make it a variable.
It's certainly a reasonably big task.
>
>> diff --git a/board/freescale/qemu-ppce500/qemu-ppce500.c
>> b/board/freescale/qemu-ppce500/qemu-ppce500.c
>> new file mode 100644
>> index 0000000..c6c4b4a
>> --- /dev/null
>> +++ b/board/freescale/qemu-ppce500/qemu-ppce500.c
>> @@ -0,0 +1,260 @@
>> +/*
>> + * Copyright 2007,2009-2014 Freescale Semiconductor, Inc.
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <command.h>
>> +#include <pci.h>
>> +#include <asm/processor.h>
>> +#include <asm/mmu.h>
>> +#include <asm/immap_85xx.h>
>> +#include <asm/fsl_pci.h>
>> +#include <asm/io.h>
>> +#include <miiphy.h>
>> +#include <libfdt.h>
>> +#include <fdt_support.h>
>> +#include <netdev.h>
>> +#include <fdtdec.h>
>> +#include <errno.h>
>> +#include <malloc.h>
>
> Do you really need all these headers? miiphy?
Ah, I missed that one during my header cleaning :). Reved that and immap_85xx.h.
>
>> +int checkboard(void)
>> +{
>> + return 0;
>> +}
>> +
>> +static struct pci_controller pci1_hose;
>> +
>> +void pci_init_board(void)
>> +{
>> + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
>> + struct fsl_pci_info pci_info;
>> + u32 devdisr, pordevsr;
>> + u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
>> + int first_free_busno = 0;
>> +
>> + devdisr = in_be32(&gur->devdisr);
>> + pordevsr = in_be32(&gur->pordevsr);
>> + porpllsr = in_be32(&gur->porpllsr);
>
> Why are you reading registers that don't exist in QEMU?
Dropped
>
>> +int last_stage_init(void)
>> +{
>> + int ret;
>> + int len = 0;
>> + const void *prop;
>> + int chosen;
>> + uint32_t *dt_base_ptr = (void*)CONFIG_QEMU_DT_ADDR;
>
> Whitespace
>
>> + uint32_t dt_base = *dt_base_ptr;
>> + uint32_t dt_size;
>> + void *fdt;
>> +
>> + dt_size = fdt_totalsize((void*)dt_base);
>
> Please put a space before the * in casts.
>
>> + /* Reserve 4k for dtb tweaks */
>> + dt_size += 4096;
>> + fdt = malloc(dt_size);
>> +
>> + /* Open device tree */
>> + ret = fdt_open_into((void*)dt_base, fdt, dt_size);
>> + if (ret) {
>> + printf("Couldn't open fdt at %x\n", dt_base);
>> + return -EIO;
>> + }
>> +
>> + chosen = fdt_path_offset(fdt, "/chosen");
>> + if (chosen < 0) {
>> + printf("Couldn't find /chosen node in fdt\n");
>> + return -EIO;
>> + }
>> +
>> + prop = fdt_getprop(fdt, chosen, "qemu,boot-kernel", &len);
>> + if (prop && (len >= 8)) {
>> + /* -kernel boot */
>> + setenv_hex("kernel_addr", *(uint64_t*)prop);
>
> Don't cast away the const. This looks like the only place you use prop;
> why not make it uint64_t to begin with?
Good idea. Fixed.
>
>> + /*
>> + * We already know where the initrd is inside the dtb, so no
>> + * need to override it
>> + */
>> + setenv("ramdisk_addr", "-");
>
> Indentation.
>
> What if the user wants to specify the initrd from within U-Boot? This
> should be handled via the default environment, not by overriding the
> user's choice.
I'm not sure I see the difference. We have the following default boot script:
#define CONFIG_BOOTCOMMAND \
"test -n \"$kernel_addr\" && bootm $kernel_addr $ramdisk_addr
$fdt_addr\0"
which is the only place where we actually use $ramdisk_addr. If a user wants to
specify the initrd within U-Boot he can do that easily because he would specify
his own boot command anyway, right?
Maybe I should rename kernel_addr to qemu_kernel_addr and drop ramdisk_addr
completely in favor for a - in the bootm command? Yeah, I'll do that :).
>
>> + }
>> +
>> + /* Give the user a variable for the host fdt */
>> + setenv_hex("fdt_addr", (int)dt_base);
>
> Unnecessary cast.
>
>> +
>> + free(fdt);
>> +
>> + return 0;
>> +}
>
> Why is the device tree handling here different from anything else we
> already have? In particular, why do you create a temporary fdt (with
> space for tweaks that never happen) just to read from it?
Because I had no idea :). Changed to directly use the in-memory fdt.
>
>> +static uint64_t get_linear_ram_size(void)
>> +{
>> + const void *prop;
>> + int memory;
>> + int len;
>> + uint32_t *dt_base_ptr = (void*)CONFIG_QEMU_DT_ADDR;
>
> Whitespace.
>
>> + void *fdt = &dt_base_ptr[1];
>>
>> + int ret;
>> + uint32_t dt_base = *dt_base_ptr;
>> + uint32_t dt_size = 1024 * 1024;
>> +
>> + ret = fdt_open_into((void*)dt_base, fdt, dt_size);
>> + if (ret)
>> + panic("Couldn't open fdt");
>> +
>> + memory = fdt_path_offset(fdt, "/memory");
>> + prop = fdt_getprop(fdt, memory, "reg", &len);
>> +
>> + if (prop && len >= 16)
>> + return *(uint64_t*)(prop+8);
>> +
>> + panic("Couldn't determine RAM size");
>> +}
>
> Again, there's no need to create a temporary fdt copy every time you
> want to read from it.
>
> What if memory doesn't start at zero (e.g. for e500v2 VFIO)?
In that case we're pretty broken regardless of determining the correct memory
size. Can u-boot handle that case at all? How would this work?
>
>> +unsigned long
>> +get_board_sys_clk(ulong dummy)
>> +{
>> + /* The actual clock doesn't matter in a PV machine */
>> + return 33333333;
>> +}
>
> s/doesn't matter/doesn't exist/
>
> Where is this used from? Can it be skipped for this target? Is the CPU
> timebase handled properly?
Turns out it's not required at all. Must have been a dependency of something I
threw away in between.
>
>> +int board_phy_config(struct phy_device *phydev)
>> +{
>> + return 0;
>> +}
>
> Why?
>
> mpc8544ds is the only board in boards/freescale that has this, so it's
> clearly optional, and you clearly don't need it...
>
> Just because QEMU started with mpc8544ds doesn't mean this needs to be a
> copy-and-paste of the U-Boot mpc8544ds code. In fact it's better if it
> isn't to reduce the likelihood of accidentally depending on hardcoded
> addresses and such.
Yup. I just had to start from somewhere :). Removed.
>
>> +int board_eth_init(bd_t *bis)
>> +{
>> + return pci_eth_init(bis);
>> +}
>> +
>> +#if defined(CONFIG_OF_BOARD_SETUP)
>> +void ft_board_setup(void *blob, bd_t *bd)
>> +{
>> + FT_FSL_PCI_SETUP;
>> +}
>> +#endif
>> +
>> +void print_laws(void)
>> +{
>> + /* We don't emulate LAWs yet */
>> +}
>> +
>> +static void fixup_tlb1(uint64_t ram_size)
>> +{
>> + u32 mas0, mas1, mas2, mas3, mas7;
>> + long tmp;
>> +
>> + /* Flush TLB0 - it only contains stale maps by now */
>> + invalidate_tlb(0);
>> +
>> + /* Create a temporary AS=1 map for ourselves */
>> + mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(13);
>> + mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS |
>> MAS1_TSIZE(BOOKE_PAGESZ_64M);
>> + mas2 = FSL_BOOKE_MAS2(0, 0);
>> + mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_DDR_SDRAM_BASE, 0,
>> + MAS3_SW|MAS3_SR|MAS3_SX);
>> + mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_DDR_SDRAM_BASE);
>> +
>> + write_tlb(mas0, mas1, mas2, mas3, mas7);
>
> Whitespace. Please run scripts/checkpatch.pl.
I shouldn't copy&paste I suppose :).
>
>> +
>> + /* Enter AS=1 */
>> + asm volatile(
>> + "mfmsr %0 \n"
>> + "ori %0, %0, 0x30 \n"
>> + "mtsrr1 %0 \n"
>> + "bl 1f \n"
>> + "1: \n"
>> + "mflr %0 \n"
>> + "addi %0, %0, 16 \n"
>> + "mtsrr0 %0 \n"
>> + "rfi \n"
>> + : "=r"(tmp) : : "lr");
>> +
>> + /* Now we live in AS=1, so we can flush all old maps */
>> + clear_ddr_tlbs(ram_size >> 20);
>> + /* and create new ones */
>> + setup_ddr_tlbs(ram_size >> 20);
>> +
>> + /* Now we can safely go back to AS=0 */
>> + asm volatile(
>> + "mfmsr %0 \n"
>> + "subi %0, %0, 0x30 \n"
>> + "mtsrr1 %0 \n"
>> + "bl 1f \n"
>> + "1: \n"
>> + "mflr %0 \n"
>> + "addi %0, %0, 16 \n"
>> + "mtsrr0 %0 \n"
>> + "rfi \n"
>> + : "=r"(tmp) : : "lr");
>> +
>> + /* And remove our AS=1 map */
>> + disable_tlb(13);
>> +}
>
> Why aren't we already in AS1? What code are you replacing with this?
I honestly don't know how it's supposed to work at all usually.
>
>> +phys_size_t fixed_sdram(void)
>> +{
>> + uint64_t ram_size;
>> +
>> + ram_size = get_linear_ram_size();
>> +
>> + /*
>> + * At this point we know that we're running in RAM, but within the
>> + * first 64MB because we don't have a mapping for anything else.
>> + *
>> + * Replace that mapping with real maps for our full RAM range.
>> + */
>> + fixup_tlb1(ram_size);
>> +
>> + return ram_size;
>> +}
>> +
>> +phys_size_t fsl_ddr_sdram_size(void)
>> +{
>> + return fixed_sdram();
>> +}
>> +
>> +void init_laws(void)
>> +{
>> + /* We don't emulate LAWs yet */
>> +}
>> +
>> +int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
>> +{
>> + /* We don't emulate LAWs yet */
>> + return 0;
>> +}
>
> What is calling set_next_law()?
Nothing anymore apparently. Removed.
>
>> diff --git a/board/freescale/qemu-ppce500/tlb.c
>> b/board/freescale/qemu-ppce500/tlb.c
>> new file mode 100644
>> index 0000000..cdc7013
>> --- /dev/null
>> +++ b/board/freescale/qemu-ppce500/tlb.c
>> @@ -0,0 +1,59 @@
>> +/*
>> + * Copyright 2008 Freescale Semiconductor, Inc.
>> + *
>> + * (C) Copyright 2000
>> + * Wolfgang Denk, DENX Software Engineering, w...@denx.de.
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <asm/mmu.h>
>> +
>> +struct fsl_e_tlb_entry tlb_table[] = {
>> + /* TLB 0 - for temp stack in cache */
>> + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
>> + MAS3_SX|MAS3_SW|MAS3_SR, 0,
>> + 0, 0, BOOKE_PAGESZ_4K, 0),
>> + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
>> CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
>> + MAS3_SX|MAS3_SW|MAS3_SR, 0,
>> + 0, 0, BOOKE_PAGESZ_4K, 0),
>> + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
>> CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
>> + MAS3_SX|MAS3_SW|MAS3_SR, 0,
>> + 0, 0, BOOKE_PAGESZ_4K, 0),
>> + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
>> CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
>> + MAS3_SX|MAS3_SW|MAS3_SR, 0,
>> + 0, 0, BOOKE_PAGESZ_4K, 0),
>
> Isn't this just normal RAM? Thus, aren't you creating overlapping TLB
> entries here?
Indeed. Removed.
>
>> + /*
>> + * TLB 0: 64M Cacheable
>> + * 0x00000000 64M Covers RAM at 0x00000000
>> + */
>> + SET_TLB_ENTRY(1, CONFIG_SYS_BOOT_BLOCK, CONFIG_SYS_BOOT_BLOCK,
>> + MAS3_SX|MAS3_SW|MAS3_SR, 0,
>> + 0, 0, BOOKE_PAGESZ_64M, 1),
>> +
>> + /*
>> + * TLB 1: 256M Non-cacheable, guarded
>> + */
>> + SET_TLB_ENTRY(1, CONFIG_SYS_PCI_VIRT, CONFIG_SYS_PCI_PHYS,
>> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
>> + 0, 1, BOOKE_PAGESZ_256M, 1),
>> +
>> + /*
>> + * TLB 2: 256M Non-cacheable, guarded
>> + */
>> + SET_TLB_ENTRY(1, CONFIG_SYS_PCI_VIRT + 0x10000000, CONFIG_SYS_PCI_PHYS
>> + 0x10000000,
>> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
>> + 0, 2, BOOKE_PAGESZ_256M, 1),
>> +
>> + /*
>> + * TLB 3: 64M Non-cacheable, guarded
>> + * 0xe000_0000 1M CCSRBAR
>> + * 0xe100_0000 255M PCI IO range
>> + */
>> + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
>> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
>> + 0, 3, BOOKE_PAGESZ_64M, 1),
>> +};
>
> These should not be executable.
Aww :). Fixed.
>
>
>> +
>> +int num_tlb_entries = ARRAY_SIZE(tlb_table);
>> diff --git a/boards.cfg b/boards.cfg
>> index d177f82..ab50982 100644
>> --- a/boards.cfg
>> +++ b/boards.cfg
>> @@ -986,6 +986,7 @@ Active powerpc mpc85xx - freescale
>> t2080qds
>> Active powerpc mpc85xx - freescale t2080qds
>> T2080QDS_SPIFLASH
>> T2080QDS:PPC_T2080,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
>> Active powerpc mpc85xx - freescale t2080qds
>> T2080QDS_NAND
>> T2080QDS:PPC_T2080,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
>> Active powerpc mpc85xx - freescale t2080qds
>> T2080QDS_SRIO_PCIE_BOOT
>> T2080QDS:PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
>> +Active powerpc mpc85xx - freescale qemu-ppce500
>> qemu-ppce500 -
>>
>> Alexander Graf <ag...@suse.de>
>> Active powerpc mpc85xx - gdsys p1022
>> controlcenterd_36BIT_SDCARD controlcenterd:36BIT,SDCARD
>>
>> Dirk Eibach <eib...@gdsys.de>
>> Active powerpc mpc85xx - gdsys p1022
>> controlcenterd_36BIT_SDCARD_DEVELOP
>> controlcenterd:36BIT,SDCARD,DEVELOP
>> Dirk Eibach
>> <eib...@gdsys.de>
>> Active powerpc mpc85xx - gdsys p1022
>> controlcenterd_TRAILBLAZER
>> controlcenterd:TRAILBLAZER,SPIFLASH
>> Dirk Eibach
>> <eib...@gdsys.de>
>> diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h
>> new file mode 100644
>> index 0000000..981b016
>> --- /dev/null
>> +++ b/include/configs/qemu-ppce500.h
>> @@ -0,0 +1,235 @@
>> +/*
>> + * Copyright 2011-2014 Freescale Semiconductor, Inc.
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +/*
>> + * Corenet DS style board configuration file
>> + */
>> +#ifndef __QEMU_PPCE500_H
>> +#define __QEMU_PPCE500_H
>> +
>> +#define CONFIG_CMD_REGINFO
>> +
>> +/* High Level Configuration Options */
>> +#define CONFIG_BOOKE
>> +#define CONFIG_E500 /* BOOKE e500 family */
>> +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */
>> +#define CONFIG_QEMU_E500
>> +
>> +#undef CONFIG_SYS_TEXT_BASE
>> +#define CONFIG_SYS_TEXT_BASE 0xf00000 /* 15 MB */
>> +
>> +#undef CONFIG_RESET_VECTOR_ADDRESS
>> +#define CONFIG_RESET_VECTOR_ADDRESS (0x1000000 - 4) /* 16 MB */
>
> Does QEMU begin execution here, or at the ELF entry point?
At the ELF entry point. But I need to define this to something.
>
>> +#define CONFIG_SYS_RAMBOOT
>> +
>> +#define CONFIG_PCI /* Enable PCI/PCIE */
>> +#define CONFIG_PCI1 1 /* PCI controller 1 */
>> +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
>> +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources
>> */
>> +
>> +#define CONFIG_ENV_OVERWRITE
>> +#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
>
> SRIO and DDR interrupts?
>
> Why do we need CONFIG_INTERRUPTS at all?
We don't. Removed.
>
>> +#define CONFIG_SYS_CCSRBAR 0xe0000000
>> +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
>
> Again, shouldn't be hardcoded (and must equal the default since QEMU
> doesn't currently support relocating CCSR)
Yes.
>
>> +#define CONFIG_FW_CFG_ADDR 0xFF7FFFFC
>
> Where did this come from? If this is a new paravirt device please
> advertise it through the device tree rather than a hardcoded address.
> And if it must be a hardcoded address, please put it well above 4G.
It's a leftover from a time when I used fw_cfg to fetch the dt pointer. Removed.
>
>> +#define CONFIG_QEMU_DT_ADDR ((2 * 1024 * 1024) - 4) /* below 2MB */
>
> This is U-Boot-internal and not something hardcoded in QEMU, right?
Yes, and it's gone now :).
>
>> +/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
>> +#define CONFIG_DIMM_SLOTS_PER_CTLR 0
>> +#define CONFIG_CHIP_SELECTS_PER_CTRL 0
>
> Why are we including code that cares about this?
In file included from cpu.c:25:0:
/root/u-boot/include/fsl_ddr_sdram.h:183:7: error:
'CONFIG_CHIP_SELECTS_PER_CTRL' undeclared here (not in a function)
So we don't include code, but we include a header that cares.
>
>> +/* Get RAM size from device tree */
>> +#define CONFIG_DDR_SPD
>> +
>> +#define CONFIG_SYS_CLK_FREQ 33000000
>
> Likewise. BTW, this made up sysclock frequency doesn't match the one
> you made up elsewhere.
speed.c: In function 'get_sys_info':
speed.c:347:42: error: 'CONFIG_SYS_CLK_FREQ' undeclared (first use in this
function)
>
>> +
>> +
>> +/*
>> + * IFC Definitions
>> + */
>
> There is no IFC.
Removed.
>
>> +#define CONFIG_SYS_NO_FLASH
>> +
>> +#define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */
>> +#define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of
>> FLASH 8M */
>> +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
>> +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
>> +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */
>
> NO_FLASH, but flash starts at 0xff800000?
Yeah, I was experimenting with putting up a flash there. Removed.
>
>> +#define CONFIG_SYS_MONITOR_BASE (CONFIG_RESET_VECTOR_ADDRESS -
>> 0x100000 + 4)
>> +#define CONFIG_SYS_SDRAM_SIZE 64
>
> Why hardcoded to 64 MiB?
The define wasn't needed anymore. Removed.
>
>> +/*
>> + * General PCI
>> + * Memory space is mapped 1-1, but I/O space must start from 0.
>> + */
>> +
>> +#define CONFIG_SYS_PCI_VIRT 0xc0000000 /* 512M PCI TLB */
>> +#define CONFIG_SYS_PCI_PHYS 0xc0000000 /* 512M PCI TLB */
>> +
>> +#define CONFIG_SYS_PCI1_MEM_VIRT 0xc0000000
>> +#define CONFIG_SYS_PCI1_MEM_BUS 0xc0000000
>> +#define CONFIG_SYS_PCI1_MEM_PHYS 0xc0000000
>> +#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
>> +#define CONFIG_SYS_PCI1_IO_VIRT 0xe1000000
>> +#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
>> +#define CONFIG_SYS_PCI1_IO_PHYS 0xe1000000
>> +#define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */
>
> I assume U-Boot will reprogram PCI based on this, but does QEMU support
> that for I/O (for memory IIRC it completely ignores the ATMU)? Don't
> rely on the QEMU address not changing.
It populated its PCI accessor struct based on this. This ideally should be dt
based. But for now we have something that works at all :).
>
>> +/*
>> + * Environment
>> + */
>> +#define CONFIG_ENV_SIZE 0x2000
>> +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */
>
> Even though ENV_IS_NOWHERE. :-)
Removed :)
>
>> +#define CONFIG_LOADS_ECHO /* echo on for serial download */
>> +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
>
> Baud rate?
Removed.
>
>> +#define CONFIG_CMD_DHCP
>> +#define CONFIG_CMD_ELF
>> +#define CONFIG_CMD_BOOTZ
>> +#define CONFIG_CMD_ERRATA
>> +#define CONFIG_CMD_GREPENV
>> +#define CONFIG_CMD_IRQ
>> +#define CONFIG_CMD_PING
>> +#define CONFIG_CMD_SETEXPR
>
> Errata?
Eh - removed :)
>
>> +#ifdef CONFIG_CMD_KGDB
>> +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
>> +#else
>> +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
>> +#endif
>
> KGDB?
*shrug* I just copied this from somewhere.
>
>> +#ifdef CONFIG_CMD_KGDB
>> +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial
>> port */
>> +#endif
>
> This is copy-and-paste cruft even on the non-QEMU targets.
Ok, I'll remove it.
Alex
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
