Hello Gerhard. > I really should have provided this earlier. Wanted to run some > more ARM tests, but haven't taken the time yet and did not want > to further delay my "tested by" feedback. > > Have run-tested v5 and v7 on PowerPC based hardware, and > build-tested other iterations of the patch set. > > Tested-by: Gerhard Sittig <g...@denx.de> > > The test was done for MPC5121 on an ifm AC14xx board; the U-Boot > binary works as expected, the fw_printenv(1) tool can be cross > built as well as native, out-of-source builds work perfectly (and > allow to identify where the source resides -- yay!).
Your close test is highly appreciated. Thanks!! I will add your Tested-by creadit to 17/38, 21/38, 38/38 when I post v8. I will also add your run-time test report to the cover letter of v8. Run-time test report for another board: I am testing with Xilinx Zynq ZC706 board. ("zynq_zc70x" entry in boards.cfg) It is working as I expect and I also confirmed it can correctly boot Linux Kernel. Best Regards Masahiro Yamada _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot