On 10:41 Tue 28 Apr     , Tom Rix wrote:
> Zoom2 is a new board from Texas Instruments and LogicPD
> 
> The logicpd web site is a good source for general information on this board.
> Please start looking here if the below links are broken.
> http://www.logicpd.com
> 
> This is a pdf of the product
> http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
> This is the product description web page
> http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp
> 
> This patch provides a zoom2 base target by copying zoom1 and by making some
> obvious changes.
> 
> To configure, run
> make omap3_zoom2_config
> 
> Signed-off-by: Tom Rix <tom....@windriver.com>
> ---
>  MAINTAINERS                       |    4 +
>  MAKEALL                           |    1 +
>  Makefile                          |    3 +
>  board/omap3/beagle/u-boot.lds     |   63 ----------
>  board/omap3/common/Makefile       |    1 +
>  board/omap3/evm/u-boot.lds        |   63 ----------
>  board/omap3/overo/u-boot.lds      |   63 ----------
>  board/omap3/pandora/u-boot.lds    |   63 ----------
>  board/omap3/zoom1/u-boot.lds      |   63 ----------
>  board/omap3/zoom2/Makefile        |   49 ++++++++
>  board/omap3/zoom2/config.mk       |   33 +++++
>  board/omap3/zoom2/zoom2.c         |   76 ++++++++++++
>  board/omap3/zoom2/zoom2.h         |  151 +++++++++++++++++++++++
>  cpu/arm_cortexa8/omap3/config.mk  |    2 +
>  cpu/arm_cortexa8/omap3/u-boot.lds |   58 +++++++++
>  doc/README.omap3                  |   13 ++
>  include/configs/omap3_zoom2.h     |  245 
> +++++++++++++++++++++++++++++++++++++
>  17 files changed, 636 insertions(+), 315 deletions(-)
>  delete mode 100644 board/omap3/beagle/u-boot.lds
>  delete mode 100644 board/omap3/evm/u-boot.lds
>  delete mode 100644 board/omap3/overo/u-boot.lds
>  delete mode 100644 board/omap3/pandora/u-boot.lds
>  delete mode 100644 board/omap3/zoom1/u-boot.lds
>  create mode 100644 board/omap3/zoom2/Makefile
>  create mode 100644 board/omap3/zoom2/config.mk
>  create mode 100644 board/omap3/zoom2/zoom2.c
>  create mode 100644 board/omap3/zoom2/zoom2.h
>  create mode 100644 cpu/arm_cortexa8/omap3/u-boot.lds
>  create mode 100644 include/configs/omap3_zoom2.h
> 
Please fix the whitespace present on the patch and split the merge of the lds
in a seperated patch

Best Regards,
J.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to