On 02/04/2014 10:12 PM, Priyanka Jain wrote: > FMAN microcode image address range on NOR flash changed from > (0xeff00000 to 0xebf1ffff) to (0xeff10000 to 0xeff1ffff) > > The change has been done > - to support FMAN microcode flashing via promjet mechanism as > promjet uses address based on offsets. Based on this > address of FMAN microcode flash on promjet flash should be 0x0 > But 0x0 offset is already use for rcw on promjet flash. > To take care of this limitation FMAN microcode address has been > changed. Now, FMAN microcode address on promjet flash is 0x10000 > > - FMAN microcode is of size 64KB so it will fit into > 0xeff10000 to 0xeff1ffff. >
NACK. The tool is not broken. I have made a configuration to use PROMJET to download all images successfully. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot