* Enable USB HW driver
* Don't disable USB-related commands any more
* Add USB-related support to bootcmd

Signed-off-by: Stephen Warren <swar...@wwwdotorg.org>
---
These two patches are RFC, since they rely on the DWC2 USB driver, from:
[RFC PATCH] usb: add driver for Synopsis DWC2 USB IP block

 include/configs/rpi_b.h | 60 ++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 50 insertions(+), 10 deletions(-)

diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index 68bb2b0..0061de5 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -146,6 +146,41 @@
        "bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0"
 #define BOOT_TARGETS_MMC "mmc0"
 
+#define BOOTCMD_INIT_USB "run usb_init; "
+#define BOOTCMDS_USB \
+       "usb_init=" \
+               "if ${usb_need_init}; then " \
+                       "set usb_need_init false; " \
+                       "usb start 0; " \
+               "fi\0" \
+       \
+       "usb_boot=" \
+               "setenv devtype usb; " \
+               BOOTCMD_INIT_USB \
+               "if usb dev ${devnum}; then " \
+                       "run scan_boot; " \
+               "fi\0" \
+       \
+       "bootcmd_usb0=setenv devnum 0; run usb_boot;\0"
+#define BOOT_TARGETS_USB "usb0"
+
+#define BOOTCMDS_DHCP \
+       "bootcmd_dhcp=" \
+               BOOTCMD_INIT_USB \
+               "if dhcp ${scriptaddr} boot.scr.uimg; then "\
+                       "source ${scriptaddr}; " \
+               "fi\0"
+#define BOOT_TARGETS_DHCP "dhcp"
+
+#define BOOTCMDS_PXE \
+       "bootcmd_pxe=" \
+               BOOTCMD_INIT_USB \
+               "dhcp; " \
+               "if pxe get; then " \
+                       "pxe boot; " \
+               "fi\0"
+#define BOOT_TARGETS_PXE "pxe"
+
 #define BOOTCMDS_COMMON \
        "rootpart=1\0" \
        \
@@ -187,18 +222,22 @@
        \
        "boot_targets=" \
                BOOT_TARGETS_MMC " " \
+               BOOT_TARGETS_USB " " \
+               BOOT_TARGETS_PXE " " \
+               BOOT_TARGETS_DHCP " " \
                "\0" \
        \
        "boot_prefixes=/\0" \
        \
        "boot_scripts=boot.scr.uimg\0" \
        \
-       BOOTCMDS_MMC
-
-#define CONFIG_BOOTCOMMAND \
-       "for target in ${boot_targets}; do run bootcmd_${target}; done"
+       BOOTCMDS_MMC \
+       BOOTCMDS_USB \
+       BOOTCMDS_DHCP \
+       BOOTCMDS_PXE
 
 #define CONFIG_BOOTCOMMAND \
+       "set usb_need_init; " \
        "for target in ${boot_targets}; do run bootcmd_${target}; done"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -227,16 +266,17 @@
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_INITRD_TAG
 
+/* USB support */
+#define CONFIG_USB_DWC2_OTG
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_CMD_USB
+
 #include <config_distro_defaults.h>
 
 /* Some things don't make sense on this HW or yet */
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_SAVEENV
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
 
 #endif
-- 
1.8.3.2

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to