Hello all, >From following commit spi write/erase times out on gplugd which uses ATMEL AT45DB041D spi flash.
>commit f4f51a8ff894d34eb332f0d11f6c73c7bf509848 >Author: Jagannadha Sutradharudu Teki <jaga...@xilinx.com> >Date: Wed Oct 2 19:36:58 2013 +0530 > > sf: probe: Add support for erase sector selection flag > > SECT_4K, SECT_32K and SECT_64K opeartions are performed to > to specific flash by adding a SECT* flag on respective > spi_flash_params.flag param. > >Signed-off-by: Jagannadha Sutradharudu Teki <jaga...@xilinx.com> Prior to this patch erase size was same as sector size; which is 64 * 1024 (64k). This 64K was replaced with 4k and timeout for erase started. If following patch is applied write/erase works well (See bottom) on top of above commit. But similar change on latest git head still has some problem with spi erase. Thanks Yogi diff --git a/drivers/mtd/spi/spi_flash_probe.c b/drivers/mtd/spi/spi_flash_probe.c index 9c2e115..9e1c4c5 100644 --- a/drivers/mtd/spi/spi_flash_probe.c +++ b/drivers/mtd/spi/spi_flash_probe.c @@ -41,7 +41,7 @@ static const struct spi_flash_params spi_flash_params_table[] = { #ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */ {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, SECT_4K}, {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, SECT_4K}, - {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, SECT_4K}, + {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, 0}, {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, SECT_4K}, {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, SECT_4K}, {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, SECT_4K}, _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot