Hi Tiger,
On 12 February 2014 07:38, <tiger...@viatech.com.cn> wrote: > Hi, Bhupesh: > I described my steps: > 1. Compiled ATF > Export CROSS_COMPILE=/home/lion/ > gcc-linaro-aarch64/bin/aarch64-linux-gnu- > make DEBUG=1 V=1 > make DEBUG=1 PLAT=fvp all dump > > Note: > I used linaro released aarch64 compiler, not official gcc 4.7 > > 2. Compiled Uboot > (1) revised CONFIG_SYS_TEXT_BASE in vexpress_aemv8a.h > CONFIG_SYS_TEXT_BASE = 0x08000000 > (2) compiled Uboot > export ARCH=aarch64 > export > CROSS_COMPILE=/home/lion/gcc-linaro-aarch64/bin/aarch64-linux-gnu- > make vexpress_aemv8a > I tried the above steps to compile vexpress_aemv8a, but i get the following errors. Any idea? aarch64-linux-gnu-gcc: error: unrecognized command line option '-marm' aarch64-linux-gnu-gcc: error: unrecognized command line option '-mno-thumb-interwork' aarch64-linux-gnu-gcc: error: unrecognized command line option '-mabi=aapcs-linux' aarch64-linux-gnu-gcc: error: unrecognized command line option '-mword-relocations' my u-boot points to "22a240c serial/serial_arc - add driver for ARC UART". Thanks, Inder > Note: > Please use u-boot.bin(about 207 KB) in below step 3. > 3. Run ATF with FVP base model > ./Foundation_v8 --cores=2 --no-gicv3 --data="./bl1.bin"@0x0 > --data="./u-boot.bin"@0x08000000 > > Note: > I use Foundation_v8, a free armv8 foundation model, not a commercial > licensed model. > > Best wishes, > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot