Hi Holger, On Mon, 27 Jan 2014 16:58:29 +0100, Holger Brunck <holger.bru...@keymile.com> wrote:
> From: Gerlando Falauto <gerlando.fala...@keymile.com> > > KMSUGP1 is from a u-boot perspective (almost) identical to KMNUSA. > The only difference is that the PCIe reset is connected to Kirkwood pin > MPP7_PEX_RST_OUTn, we use a dedicated config flag KM_PCIE_RESET_MPP7. > Such pin should theoretically be handled by the PCIe subsystem > automatically, but this turned out not to be the case. > So simply configure this PIN as a GPIO and issue a pulse manually. > > Signed-off-by: Gerlando Falauto <gerlando.fala...@keymile.com> > Cc: Karlheinz Jerg <karlheinz.j...@keymile.com> > Cc: Valentin Longchamp <valenting.longch...@keymile.com> > Cc: Holger Brunck <holger.bru...@keymile.com> > --- This one does not apply properly on u-boot-arm/master. Can you look into this and post a V2 (of just 8/8) ? Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot