> 1) Six boards work, one board fails. > 2) SDRAM chips re-balled on the failing board. > 3) SDRAM failing. > > That sounds like a hardware/assembly problem to me. My bet is a solder > problem. Have you (can you) x-ray the chips and verify the SDRAM > soldering is OK?
That was my initial hunch simply because of the 6 working boards. Our hardware designer took the board in for x-ray this morning to see if there is an issue there. If that is the problem, then we are set - though I still plan to run some extensive diagnostics on the memory just to be sure. Good to hear that someone has the same hunch as I did! Jonathan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
