> > sun7i# scsi reset > > Reset SCSI > scanning bus for devices... > timeout exit! > Found 0 device(s). > > this same problem not think that the drive to boot > > Nothing appears scsi info > > :( > I will try to put another HD > > Loading the kernel > [3.723244] ata1.00: ATA-8: SAMSUNG HM320II, 2AC101C4, max UDMA/133 > [3.729646] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) > [3.748349] ata1.00: configured for UDMA/133 > [3.752698] ATA1: EH complete > [3.756157] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM320II 2AC1 PQ: 0 > ANSI: 5 > [3.767627] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 > GB/298 GiB) > [3.787130] sd 0:0:0:0: [sda] Write Protect is off > [3.796692] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > does not support DPO or FUA > [3.827250] sda: sda1 > [3.836155] sd 0:0:0:0: [sda] Attached SCSI disk > done. > > > Ezaul Zillmer >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
