On Saturday, March 22, 2014 at 10:49:25 PM, Eric Nelson wrote: > Hi Thierry, > > On 03/22/2014 01:50 PM, Thierry Bultel wrote: > > When I communicated about the bug I had, > > and said that my temporary workaround was to disable the PCIe, > > my intention was not to make the suppression become a standard, > > and I believe it is a little bit frustrating for Marek. > > I'm not sure I understand Marek's frustration. Marek's a capable > guy, and certainly in a position to carry a 1-line patch around > for his needs.
Uh, I'm not frustrated, where did that come from ? There's like gazilion of things which do frustrate me now (like I'm not in Germany now so I cannot eat a tasty Frankenschmaus or Bratwurst), but this ... nah. > > The AMOS820, based on the sabrelite/nitrogen has a PCIe slot on the main > > board, so there might be some interest of having the PCIe support > > > > enabled. > > My first instinct is to say that if AMOS820 needs its' own > setting, you can add a board for it and carry your own > amos820.h. Yes, make a new board support with all you need in there (new board dir, new board config etc). [...] Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot