This utilizes existing nand support, including the mtd layer to provide a
a method to load an image off nand for SPL. It is somewhat bulky but avoids
duplicating code.

This will need to be split out and re-based on top of Tom's recent patch to
add MTD NAND support which is needed here.

Signed-off-by: Tim Harvey <thar...@gateworks.com>
---
 drivers/mtd/Makefile            | 11 ++++++++++
 drivers/mtd/nand/Makefile       |  9 ++++++++
 drivers/mtd/nand/mxs_nand_spl.c | 46 +++++++++++++++++++++++++++++++++++++++++
 spl/Makefile                    |  1 +
 4 files changed, 67 insertions(+)
 create mode 100644 drivers/mtd/nand/mxs_nand_spl.c

diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 5467a95..10ec470 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -5,6 +5,15 @@
 # SPDX-License-Identifier:     GPL-2.0+
 #
 
+ifdef CONFIG_SPL_BUILD
+
+ifdef CONFIG_SPL_NAND_MXS
+obj-y += mtdcore.o
+obj-y += mtdpart.o
+endif
+
+else # not spl
+
 ifneq (,$(findstring 
y,$(CONFIG_MTD_DEVICE)$(CONFIG_CMD_NAND)$(CONFIG_CMD_ONENAND)))
 obj-y += mtdcore.o
 endif
@@ -18,3 +27,5 @@ obj-$(CONFIG_FTSMC020) += ftsmc020.o
 obj-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
 obj-$(CONFIG_MW_EEPROM) += mw_eeprom.o
 obj-$(CONFIG_ST_SMI) += st_smi.o
+
+endif
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 02b149c..8b1a37a 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -19,6 +19,14 @@ obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
 obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o
 obj-$(CONFIG_SPL_NAND_INIT) += nand.o
 
+ifdef CONFIG_SPL_NAND_MXS
+obj-y += mxs_nand_spl.o
+obj-y += nand_bbt.o
+obj-y += nand_ids.o
+obj-y += nand_util.o
+obj-y += nand_ecc.o
+endif
+
 else # not spl
 
 NORMAL_DRIVERS=y
@@ -65,5 +73,6 @@ else  # minimal SPL drivers
 obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
 obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o
 obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
+obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o
 
 endif # drivers
diff --git a/drivers/mtd/nand/mxs_nand_spl.c b/drivers/mtd/nand/mxs_nand_spl.c
new file mode 100644
index 0000000..ec07eb1
--- /dev/null
+++ b/drivers/mtd/nand/mxs_nand_spl.c
@@ -0,0 +1,46 @@
+/*
+ * (C) Copyright 2014
+ * Tim Harvey, Gateworks Corporation, thar...@gateworks.com
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <nand.h>
+
+static nand_info_t mtd;
+static struct nand_chip nand_chip;
+
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
+{
+       size_t sz, actual;
+
+       debug("%s offset:0x%08x len:%d\n", __func__, offs, size);
+       sz = size;
+       nand_read_skip_bad(&mtd, (loff_t) offs, &sz, &actual, size, dst);
+       debug("read %d/%d bytes\n", sz, actual);
+
+       return 0;
+}
+
+void nand_init(void)
+{
+       int ret;
+
+       board_nand_init(&nand_chip);
+       mtd.priv = &nand_chip;
+       if (nand_chip.select_chip)
+               nand_chip.select_chip(&mtd, 0);
+
+       ret = nand_scan(&mtd, 1);
+       if (!ret)
+               ret = nand_scan_tail(&mtd);
+       debug("oobsize=%d pagesize=%d\n", mtd.oobsize, mtd.writesize);
+       printf("NAND: %llu MiB\n", (mtd.size / (1024 * 1024)));
+}
+
+void nand_deselect(void)
+{
+       if (nand_chip.select_chip)
+               nand_chip.select_chip(&mtd, -1);
+}
diff --git a/spl/Makefile b/spl/Makefile
index 346d0aa..6a2c80f 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -103,6 +103,7 @@ libs-y += fs/
 libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
 libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
 libs-$(if $(CONFIG_CMD_NAND),$(CONFIG_SPL_NAND_SUPPORT)) += drivers/mtd/nand/
+libs-$(CONFIG_SPL_NAND_MXS) += drivers/mtd/
 libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
 libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
 libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
-- 
1.8.3.2

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to