Signed-off-by: Eric Bénard <e...@eukrea.com>
---
v2 : rename display_num to display_count as requested by Eric Nelson

 board/freescale/mx6sabresd/mx6sabresd.c | 59 ++-------------------------------
 include/configs/mx6sabresd.h            |  1 +
 2 files changed, 4 insertions(+), 56 deletions(-)

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c 
b/board/freescale/mx6sabresd/mx6sabresd.c
index 12d8c56..297d20d 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -14,14 +14,13 @@
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 DECLARE_GLOBAL_DATA_PTR;
@@ -255,14 +254,6 @@ int board_phy_config(struct phy_device *phydev)
 }
 
 #if defined(CONFIG_VIDEO_IPUV3)
-struct display_info_t {
-       int     bus;
-       int     addr;
-       int     pixfmt;
-       int     (*detect)(struct display_info_t const *dev);
-       void    (*enable)(struct display_info_t const *dev);
-       struct  fb_videomode mode;
-};
 
 static int detect_hdmi(struct display_info_t const *dev)
 {
@@ -299,7 +290,7 @@ static void enable_lvds(struct display_info_t const *dev)
        writel(reg, &iomux->gpr[2]);
 }
 
-static struct display_info_t const displays[] = {{
+struct display_info_t const displays[] = {{
        .bus    = -1,
        .addr   = 0,
        .pixfmt = IPU_PIX_FMT_RGB666,
@@ -340,51 +331,7 @@ static struct display_info_t const displays[] = {{
                .sync           = FB_SYNC_EXT,
                .vmode          = FB_VMODE_NONINTERLACED
 } } };
-
-int board_video_skip(void)
-{
-       int i;
-       int ret;
-       char const *panel = getenv("panel");
-       if (!panel) {
-               for (i = 0; i < ARRAY_SIZE(displays); i++) {
-                       struct display_info_t const *dev = displays+i;
-                       if (dev->detect && dev->detect(dev)) {
-                               panel = dev->mode.name;
-                               printf("auto-detected panel %s\n", panel);
-                               break;
-                       }
-               }
-               if (!panel) {
-                       panel = displays[0].mode.name;
-                       printf("No panel detected: default to %s\n", panel);
-                       i = 0;
-               }
-       } else {
-               for (i = 0; i < ARRAY_SIZE(displays); i++) {
-                       if (!strcmp(panel, displays[i].mode.name))
-                               break;
-               }
-       }
-       if (i < ARRAY_SIZE(displays)) {
-               ret = ipuv3_fb_init(&displays[i].mode, 0,
-                                   displays[i].pixfmt);
-               if (!ret) {
-                       displays[i].enable(displays+i);
-                       printf("Display: %s (%ux%u)\n",
-                              displays[i].mode.name,
-                              displays[i].mode.xres,
-                              displays[i].mode.yres);
-               } else
-                       printf("LCD %s cannot be configured: %d\n",
-                              displays[i].mode.name, ret);
-       } else {
-               printf("unsupported panel %s\n", panel);
-               return -EINVAL;
-       }
-
-       return 0;
-}
+size_t display_count = ARRAY_SIZE(displays);
 
 static void setup_display(void)
 {
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 4919f53..72ae024 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -47,5 +47,6 @@
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
 
 #endif                         /* __MX6QSABRESD_CONFIG_H */
-- 
1.9.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to