On Fri, 2014-04-04 at 22:47 +0200, Pavel Machek wrote: > > Hi! > > > I'm trying to get custom preloader to work (on EBV Socrates)... I > > tried applying old patch from mail archives, but a) applying patch > > from mail archives is not fun and b) it did not seem to do the trick. > > Just to make sure... right way to use the > socfpga-signed-preloader.bin is > > dd if=socfpga-signed-preloader.bin of=/dev/mmcblk0p1 bs=64k seek=0 > dd if=u-boot.img of=/dev/mmcblk0p1 bs=64K seek=4
Assuming that mmcblk0p1 is the raw partition (type A2) on your disk, then yes these are the correct instructions. You only update one of the four preloader copies, but this is fine as well. Cannot spot a problem here. virtually yours Gerhard Sittig -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr. 5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
