On 17:21 Wed 06 May , Dirk Behme wrote: > Some OMAP3 boards need control for external power companion > chips. Introduce a CONFIG option for this, to avoid Makefile > changes for each board.
please also move it to cpu/arm_cortexa8/omap3/ omap3 and davinci is not a vendor so common code will need to go to drivers or cpu/<arch>/<soc> for the davinci it's already start to move to it Best Regards, J. > > Signed-off-by: Dirk Behme <dirk.be...@googlemail.com> > --- > > Compile tested with ./MAKEALL ARM_CORTEX_A8, boot tested on > OMAP3 based BeagleBoard. > > Note: This patch trys to fix the first comment of > > http://lists.denx.de/pipermail/u-boot/2009-April/051383.html > > board/omap3/common/Makefile | 5 +---- > doc/README.omap3 | 11 +++++++++++ > include/configs/omap3_beagle.h | 1 + > include/configs/omap3_overo.h | 1 + > include/configs/omap3_pandora.h | 1 + > include/configs/omap3_zoom1.h | 1 + > 6 files changed, 16 insertions(+), 4 deletions(-) > > Index: u-boot-main/doc/README.omap3 > =================================================================== > --- u-boot-main.orig/doc/README.omap3 > +++ u-boot-main/doc/README.omap3 > @@ -77,6 +77,17 @@ For all other commands see > > help > > +Custom configs > +============== > + > +CONFIG_OMAP3_POWER > + > +Some OMAP3 boards use external power companion chips to be configured. Enable > +this CONFIG option in your board specific configuration file if your board > +uses such a companion chip. could you name it ine the config and the file name Best Regards, J. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot