[U-Boot] [PATCH 2/4] ventana: use non-generic pfuze100 init

[Tim Harvey]

Signed-off-by: Tim Harvey <thar...@gateworks.com>
---
 board/gateworks/gw_ventana/gw_ventana.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/board/gateworks/gw_ventana/gw_ventana.c 
b/board/gateworks/gw_ventana/gw_ventana.c
index c130e2c..48e90e0 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -1077,10 +1077,11 @@ int misc_init_r(void)
        }
 
        /* configure PFUZE100 PMIC (not used on all Ventana baseboards) */
-       if ((board_type == GW54xx || board_type == GW54proto) &&
-           !pmic_init(I2C_PMIC)) {
+       power_pfuze100_init(I2C_PMIC);
+       if (board_type == GW54xx || board_type == GW54proto) {
                struct pmic *p = pmic_get("PFUZE100_PMIC");
                u32 reg;
+
                if (p && !pmic_probe(p)) {
                        pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
                        printf("PMIC:  PFUZE100 ID=0x%02x\n", reg);
-- 
1.8.3.2

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot