This patch adds DRAM initialisation support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable.
Signed-off-by: Alexandru Gagniuc <mr.nuke...@gmail.com> Signed-off-by: Emilio López <emi...@elopez.com.ar> Signed-off-by: Hans de Goede <hdego...@redhat.com> Signed-off-by: Henrik Nordstrom <hen...@henriknordstrom.net> Signed-off-by: Jens Kuske <jensku...@gmail.com> Signed-off-by: Luke Leighton <l...@lkcl.net> Signed-off-by: Oliver Schinagl <oli...@schinagl.nl> Signed-off-by: Siarhei Siamashka <siarhei.siamas...@gmail.com> Signed-off-by: Stefan Roese <s...@denx.de> Signed-off-by: Ian Campbell <i...@hellion.org.uk> Reviewed-by: Marek Vasut <ma...@denx.de> Cc: Tom Cubie <mr.hip...@gmail.com> --- v5: Based on 3f5ff92b1503 "sunxi: add comments to pll1_para array." - No changes required v4: Based on d9fe0a1e061e "sunxi: mksunxiboot: remove unnecessary casts." - removed unbounded loops - support more dram clock speeds. v3: Based on c89867dca2e9 "sunxi: clocks: clock_get_pll5 prototype and coding style". v2: Based on u-boot-sunxi.git#sunxi d9aa5dd3d15c "sunxi: mmc: checkpatch whitespace fixes" with v2014.04-rc2 merged in: - remove redundant braces in mctl_ddr3_reset - remove incorrect call to mctl_ddr3_reset. - add CONFIG_SUN7I to simplify future SUN?I support. - add a comment about the magic numbers from the a/w code dumps - fix a bunch of checkpatch.pl issues v1: Based on u-boot-sunxi.git#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section in ldscripts" vs v2014.01. --- arch/arm/cpu/armv7/sunxi/Makefile | 1 + arch/arm/cpu/armv7/sunxi/dram.c | 593 +++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/dram.h | 179 ++++++++++ 3 files changed, 773 insertions(+) create mode 100644 arch/arm/cpu/armv7/sunxi/dram.c create mode 100644 arch/arm/include/asm/arch-sunxi/dram.h diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 529e7ec..d81d26c 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -11,3 +11,4 @@ obj-y += timer.o obj-y += clock.o obj-y += pinmux.o obj-$(CONFIG_SUN7I) += clock_sun4i.o +obj-$(CONFIG_SUN7I) += dram.o diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c new file mode 100644 index 0000000..b43c4b4 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -0,0 +1,593 @@ +/* + * sunxi DRAM controller initialization + * (C) Copyright 2012 Henrik Nordstrom <hen...@henriknordstrom.net> + * (C) Copyright 2013 Luke Kenneth Casson Leighton <l...@lkcl.net> + * + * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c + * and earlier U-Boot Allwiner A10 SPL work + * + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Berg Xing <bergx...@allwinnertech.com> + * Tom Cubie <tangli...@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * Unfortunately the only documentation we have on the sun7i DRAM + * controller is Allwinner boot0 + boot1 code, and that code uses + * magic numbers & shifts with no explanations. Hence this code is + * rather undocumented and full of magic. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/dram.h> +#include <asm/arch/timer.h> +#include <asm/arch/sys_proto.h> + +#define CPU_CFG_CHIP_VER(n) ((n) << 6) +#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3) +#define CPU_CFG_CHIP_REV_A 0x0 +#define CPU_CFG_CHIP_REV_C1 0x1 +#define CPU_CFG_CHIP_REV_C2 0x2 +#define CPU_CFG_CHIP_REV_B 0x3 + +/* + * Wait up to 1s for mask to be clear in given reg. + */ +static void await_completion(u32 *reg, u32 mask) +{ + unsigned long tmo = timer_get_us() + 1000000; + + while (readl(reg) & mask) { + if (timer_get_us() > tmo) + panic("Timeout initialising DRAM\n"); + } +} + +static void mctl_ddr3_reset(void) +{ + struct sunxi_dram_reg *dram = + (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrbits_le32(&dram->mcr, DRAM_MCR_RESET); + udelay(2); + setbits_le32(&dram->mcr, DRAM_MCR_RESET); +} + +static void mctl_set_drive(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28), + DRAM_MCR_MODE_EN(0x3) | + 0xffc); +} + +static void mctl_itm_disable(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF); +} + +static void mctl_itm_enable(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF); +} + +static void mctl_enable_dll0(u32 phase) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + ((phase >> 16) & 0x3f) << 6); + clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE); + udelay(2); + + clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE); + udelay(22); + + clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET); + udelay(22); +} + +/* + * Note: This differs from pm/standby in that it checks the bus width + */ +static void mctl_enable_dllx(u32 phase) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 i, n, bus_width; + + bus_width = readl(&dram->dcr); + + if ((bus_width & DRAM_DCR_BUS_WIDTH_MASK) == + DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT)) + n = DRAM_DCR_NR_DLLCR_32BIT; + else + n = DRAM_DCR_NR_DLLCR_16BIT; + + for (i = 1; i < n; i++) { + clrsetbits_le32(&dram->dllcr[i], 0xf << 14, + (phase & 0xf) << 14); + clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET, + DRAM_DLLCR_DISABLE); + phase >>= 4; + } + udelay(2); + + for (i = 1; i < n; i++) + clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET | + DRAM_DLLCR_DISABLE); + udelay(22); + + for (i = 1; i < n; i++) + clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE, + DRAM_DLLCR_NRESET); + udelay(22); +} + +static u32 hpcr_value[32] = { +#ifdef CONFIG_SUN7I + 0x0301, 0x0301, 0x0301, 0x0301, + 0x0301, 0x0301, 0x0301, 0x0301, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0x1031, 0x1031, 0x0735, 0x1035, + 0x1035, 0x0731, 0x1031, 0x0735, + 0x1035, 0x1031, 0x0731, 0x1035, + 0x0001, 0x1031, 0, 0x1031 + /* last row differs from boot0 source table + * 0x1031, 0x0301, 0x0301, 0x0731 + * but boot0 code skips #28 and #30, and sets #29 and #31 to the + * value from #28 entry (0x1031) + */ +#endif +}; + +static void mctl_configure_hostport(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 i; + + for (i = 0; i < 32; i++) + writel(hpcr_value[i], &dram->hpcr[i]); +} + +static void mctl_setup_dram_clock(u32 clk) +{ + u32 reg_val; + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* setup DRAM PLL */ + reg_val = readl(&ccm->pll5_cfg); + reg_val &= ~CCM_PLL5_CTRL_M_MASK; /* set M to 0 (x1) */ + reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */ + reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */ + reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */ + if (clk >= 540 && clk < 552) { + /* dram = 540MHz, pll5p = 540MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15)); + reg_val |= CCM_PLL5_CTRL_P(1); + } else if (clk >= 512 && clk < 528) { + /* dram = 512MHz, pll5p = 384MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16)); + reg_val |= CCM_PLL5_CTRL_P(2); + } else if (clk >= 496 && clk < 504) { + /* dram = 496MHz, pll5p = 372MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31)); + reg_val |= CCM_PLL5_CTRL_P(2); + } else if (clk >= 468 && clk < 480) { + /* dram = 468MHz, pll5p = 468MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13)); + reg_val |= CCM_PLL5_CTRL_P(1); + } else if (clk >= 396 && clk < 408) { + /* dram = 396MHz, pll5p = 396MHz */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11)); + reg_val |= CCM_PLL5_CTRL_P(1); + } else { + /* any other frequency that is a multiple of 24 */ + reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); + reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); + reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24)); + reg_val |= CCM_PLL5_CTRL_P(CCM_PLL5_CTRL_P_X(2)); + } + reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */ + reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */ + writel(reg_val, &ccm->pll5_cfg); + udelay(5500); + + setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK); + +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) + /* reset GPS */ + clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE); + setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); + udelay(1); + clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); +#endif + + /* setup MBUS clock */ + reg_val = CCM_MBUS_CTRL_GATE | + CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) | + CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) | + CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2)); + writel(reg_val, &ccm->mbus_clk_cfg); + + /* + * open DRAMC AHB & DLL register clock + * close it first + */ + clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); + udelay(22); + + /* then open it */ + setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); + udelay(22); +} + +static int dramc_scan_readpipe(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 reg_val; + + /* data training trigger */ +#ifdef CONFIG_SUN7I + clrbits_le32(&dram->csr, DRAM_CSR_FAILED); +#endif + setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING); + + /* check whether data training process has completed */ + await_completion(&dram->ccr, DRAM_CCR_DATA_TRAINING); + + /* check data training result */ + reg_val = readl(&dram->csr); + if (reg_val & DRAM_CSR_FAILED) + return -1; + + return 0; +} + +static int dramc_scan_dll_para(void) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + const u32 dqs_dly[7] = {0x3, 0x2, 0x1, 0x0, 0xe, 0xd, 0xc}; + const u32 clk_dly[15] = {0x07, 0x06, 0x05, 0x04, 0x03, + 0x02, 0x01, 0x00, 0x08, 0x10, + 0x18, 0x20, 0x28, 0x30, 0x38}; + u32 clk_dqs_count[15]; + u32 dqs_i, clk_i, cr_i; + u32 max_val, min_val; + u32 dqs_index, clk_index; + + /* Find DQS_DLY Pass Count for every CLK_DLY */ + for (clk_i = 0; clk_i < 15; clk_i++) { + clk_dqs_count[clk_i] = 0; + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + (clk_dly[clk_i] & 0x3f) << 6); + for (dqs_i = 0; dqs_i < 7; dqs_i++) { + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_i] & 0x4f) << 14); + } + udelay(2); + if (dramc_scan_readpipe() == 0) + clk_dqs_count[clk_i]++; + } + } + /* Test DQS_DLY Pass Count for every CLK_DLY from up to down */ + for (dqs_i = 15; dqs_i > 0; dqs_i--) { + max_val = 15; + min_val = 15; + for (clk_i = 0; clk_i < 15; clk_i++) { + if (clk_dqs_count[clk_i] == dqs_i) { + max_val = clk_i; + if (min_val == 15) + min_val = clk_i; + } + } + if (max_val < 15) + break; + } + + /* Check if Find a CLK_DLY failed */ + if (!dqs_i) + goto fail; + + /* Find the middle index of CLK_DLY */ + clk_index = (max_val + min_val) >> 1; + if ((max_val == (15 - 1)) && (min_val > 0)) + /* if CLK_DLY[MCTL_CLK_DLY_COUNT] is very good, then the middle + * value can be more close to the max_val + */ + clk_index = (15 + clk_index) >> 1; + else if ((max_val < (15 - 1)) && (min_val == 0)) + /* if CLK_DLY[0] is very good, then the middle value can be more + * close to the min_val + */ + clk_index >>= 1; + if (clk_dqs_count[clk_index] < dqs_i) + clk_index = min_val; + + /* Find the middle index of DQS_DLY for the CLK_DLY got above, and Scan + * read pipe again + */ + clrsetbits_le32(&dram->dllcr[0], 0x3f << 6, + (clk_dly[clk_index] & 0x3f) << 6); + max_val = 7; + min_val = 7; + for (dqs_i = 0; dqs_i < 7; dqs_i++) { + clk_dqs_count[dqs_i] = 0; + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_i] & 0x4f) << 14); + } + udelay(2); + if (dramc_scan_readpipe() == 0) { + clk_dqs_count[dqs_i] = 1; + max_val = dqs_i; + if (min_val == 7) + min_val = dqs_i; + } + } + + if (max_val < 7) { + dqs_index = (max_val + min_val) >> 1; + if ((max_val == (7-1)) && (min_val > 0)) + dqs_index = (7 + dqs_index) >> 1; + else if ((max_val < (7-1)) && (min_val == 0)) + dqs_index >>= 1; + if (!clk_dqs_count[dqs_index]) + dqs_index = min_val; + for (cr_i = 1; cr_i < 5; cr_i++) { + clrsetbits_le32(&dram->dllcr[cr_i], + 0x4f << 14, + (dqs_dly[dqs_index] & 0x4f) << 14); + } + udelay(2); + return dramc_scan_readpipe(); + } + +fail: + clrbits_le32(&dram->dllcr[0], 0x3f << 6); + for (cr_i = 1; cr_i < 5; cr_i++) + clrbits_le32(&dram->dllcr[cr_i], 0x4f << 14); + udelay(2); + + return dramc_scan_readpipe(); +} + +static void dramc_clock_output_en(u32 on) +{ +#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + + if (on) + setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); + else + clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); +#endif +} + +static const u16 tRFC_table[2][6] = { + /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */ + /* DDR2 75ns 105ns 127.5ns 195ns 327.5ns invalid */ + { 77, 108, 131, 200, 336, 336 }, + /* DDR3 invalid 90ns 110ns 160ns 300ns 350ns */ + { 93, 93, 113, 164, 308, 359 } +}; + +static void dramc_set_autorefresh_cycle(u32 clk, u32 type, u32 density) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 tRFC, tREFI; + + tRFC = (tRFC_table[type][density] * clk + 1023) >> 10; + tREFI = (7987 * clk) >> 10; /* <= 7.8us */ + + writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr); +} + +unsigned long dramc_init(struct dram_para *para) +{ + struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; + u32 reg_val; + u32 density; + int ret_val; + + /* check input dram parameter structure */ + if (!para) + return 0; + + /* setup DRAM relative clock */ + mctl_setup_dram_clock(para->clock); + + /* reset external DRAM */ + mctl_set_drive(); + + /* dram clock off */ + dramc_clock_output_en(0); + + mctl_itm_disable(); + mctl_enable_dll0(para->tpr3); + + /* configure external DRAM */ + reg_val = 0x0; + if (para->type == DRAM_MEMORY_TYPE_DDR3) + reg_val |= DRAM_DCR_TYPE_DDR3; + reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3); + + if (para->density == 256) + density = DRAM_DCR_CHIP_DENSITY_256M; + else if (para->density == 512) + density = DRAM_DCR_CHIP_DENSITY_512M; + else if (para->density == 1024) + density = DRAM_DCR_CHIP_DENSITY_1024M; + else if (para->density == 2048) + density = DRAM_DCR_CHIP_DENSITY_2048M; + else if (para->density == 4096) + density = DRAM_DCR_CHIP_DENSITY_4096M; + else if (para->density == 8192) + density = DRAM_DCR_CHIP_DENSITY_8192M; + else + density = DRAM_DCR_CHIP_DENSITY_256M; + + reg_val |= DRAM_DCR_CHIP_DENSITY(density); + reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1); + reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1); + reg_val |= DRAM_DCR_CMD_RANK_ALL; + reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE); + writel(reg_val, &dram->dcr); + +#ifdef CONFIG_SUN7I + setbits_le32(&dram->zqcr1, (0x1 << 24) | (0x1 << 1)); + if (para->tpr4 & 0x2) + clrsetbits_le32(&dram->zqcr1, (0x1 << 24), (0x1 << 1)); + dramc_clock_output_en(1); +#endif + +#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)) + /* set odt impendance divide ratio */ + reg_val = ((para->zq) >> 8) & 0xfffff; + reg_val |= ((para->zq) & 0xff) << 20; + reg_val |= (para->zq) & 0xf0000000; + writel(reg_val, &dram->zqcr0); +#endif + +#ifdef CONFIG_SUN7I + /* Set CKE Delay to about 1ms */ + setbits_le32(&dram->idcr, 0x1ffff); +#endif + +#ifdef CONFIG_SUN7I + if ((readl(&dram->ppwrsctl) & 0x1) != 0x1) + mctl_ddr3_reset(); + else + setbits_le32(&dram->mcr, DRAM_MCR_RESET); +#endif + + udelay(1); + + await_completion(&dram->ccr, DRAM_CCR_INIT); + + mctl_enable_dllx(para->tpr3); + + /* set refresh period */ + dramc_set_autorefresh_cycle(para->clock, para->type - 2, density); + + /* set timing parameters */ + writel(para->tpr0, &dram->tpr0); + writel(para->tpr1, &dram->tpr1); + writel(para->tpr2, &dram->tpr2); + + if (para->type == DRAM_MEMORY_TYPE_DDR3) { + reg_val = DRAM_MR_BURST_LENGTH(0x0); +#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)) + reg_val |= DRAM_MR_POWER_DOWN; +#endif + reg_val |= DRAM_MR_CAS_LAT(para->cas - 4); + reg_val |= DRAM_MR_WRITE_RECOVERY(0x5); + } else if (para->type == DRAM_MEMORY_TYPE_DDR2) { + reg_val = DRAM_MR_BURST_LENGTH(0x2); + reg_val |= DRAM_MR_CAS_LAT(para->cas); + reg_val |= DRAM_MR_WRITE_RECOVERY(0x5); + } + writel(reg_val, &dram->mr); + + writel(para->emr1, &dram->emr); + writel(para->emr2, &dram->emr2); + writel(para->emr3, &dram->emr3); + + /* set DQS window mode */ + clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE); + +#ifdef CONFIG_SUN7I + /* Command rate timing mode 2T & 1T */ + if (para->tpr4 & 0x1) + setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T); +#endif + /* reset external DRAM */ + setbits_le32(&dram->ccr, DRAM_CCR_INIT); + await_completion(&dram->ccr, DRAM_CCR_INIT); + +#ifdef CONFIG_SUN7I + /* setup zq calibration manual */ + reg_val = readl(&dram->ppwrsctl); + if ((reg_val & 0x1) == 1) { + /* super_standby_flag = 1 */ + + reg_val = readl(0x01c20c00 + 0x120); /* rtc */ + reg_val &= 0x000fffff; + reg_val |= 0x17b00000; + writel(reg_val, &dram->zqcr0); + + /* exit self-refresh state */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27); + /* check whether command has been executed */ + await_completion(&dram->dcr, 0x1 << 31); + + udelay(2); + + /* dram pad hold off */ + setbits_le32(&dram->ppwrsctl, 0x16510000); + + await_completion(&dram->ppwrsctl, 0x1); + + /* exit self-refresh state */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27); + + /* check whether command has been executed */ + await_completion(&dram->dcr, 0x1 << 31); + + udelay(2); + + /* issue a refresh command */ + clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x13 << 27); + await_completion(&dram->dcr, 0x1 << 31); + + udelay(2); + } +#endif + + /* scan read pipe value */ + mctl_itm_enable(); + if (para->tpr3 & (0x1 << 31)) { + ret_val = dramc_scan_dll_para(); + if (ret_val == 0) + para->tpr3 = + (((readl(&dram->dllcr[0]) >> 6) & 0x3f) << 16) | + (((readl(&dram->dllcr[1]) >> 14) & 0xf) << 0) | + (((readl(&dram->dllcr[2]) >> 14) & 0xf) << 4) | + (((readl(&dram->dllcr[3]) >> 14) & 0xf) << 8) | + (((readl(&dram->dllcr[4]) >> 14) & 0xf) << 12 + ); + } else { + ret_val = dramc_scan_readpipe(); + } + + if (ret_val < 0) + return 0; + + /* configure all host port */ + mctl_configure_hostport(); + + return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE); +} diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h new file mode 100644 index 0000000..67fbfad --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -0,0 +1,179 @@ +/* + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Berg Xing <bergx...@allwinnertech.com> + * Tom Cubie <tangli...@allwinnertech.com> + * + * Sunxi platform dram register definition. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_DRAM_H +#define _SUNXI_DRAM_H + +#include <linux/types.h> + +struct sunxi_dram_reg { + u32 ccr; /* 0x00 controller configuration register */ + u32 dcr; /* 0x04 dram configuration register */ + u32 iocr; /* 0x08 i/o configuration register */ + u32 csr; /* 0x0c controller status register */ + u32 drr; /* 0x10 dram refresh register */ + u32 tpr0; /* 0x14 dram timing parameters register 0 */ + u32 tpr1; /* 0x18 dram timing parameters register 1 */ + u32 tpr2; /* 0x1c dram timing parameters register 2 */ + u32 gdllcr; /* 0x20 global dll control register */ + u8 res0[0x28]; + u32 rslr0; /* 0x4c rank system latency register */ + u32 rslr1; /* 0x50 rank system latency register */ + u8 res1[0x8]; + u32 rdgr0; /* 0x5c rank dqs gating register */ + u32 rdgr1; /* 0x60 rank dqs gating register */ + u8 res2[0x34]; + u32 odtcr; /* 0x98 odt configuration register */ + u32 dtr0; /* 0x9c data training register 0 */ + u32 dtr1; /* 0xa0 data training register 1 */ + u32 dtar; /* 0xa4 data training address register */ + u32 zqcr0; /* 0xa8 zq control register 0 */ + u32 zqcr1; /* 0xac zq control register 1 */ + u32 zqsr; /* 0xb0 zq status register */ + u32 idcr; /* 0xb4 initializaton delay configure reg */ + u8 res3[0x138]; + u32 mr; /* 0x1f0 mode register */ + u32 emr; /* 0x1f4 extended mode register */ + u32 emr2; /* 0x1f8 extended mode register */ + u32 emr3; /* 0x1fc extended mode register */ + u32 dllctr; /* 0x200 dll control register */ + u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */ + /* 0x208 dll control register 1(byte 1) */ + /* 0x20c dll control register 2(byte 2) */ + /* 0x210 dll control register 3(byte 3) */ + /* 0x214 dll control register 4(byte 4) */ + u32 dqtr0; /* 0x218 dq timing register */ + u32 dqtr1; /* 0x21c dq timing register */ + u32 dqtr2; /* 0x220 dq timing register */ + u32 dqtr3; /* 0x224 dq timing register */ + u32 dqstr; /* 0x228 dqs timing register */ + u32 dqsbtr; /* 0x22c dqsb timing register */ + u32 mcr; /* 0x230 mode configure register */ + u8 res[0x8]; + u32 ppwrsctl; /* 0x23c pad power save control */ + u32 apr; /* 0x240 arbiter period register */ + u32 pldtr; /* 0x244 priority level data threshold reg */ + u8 res5[0x8]; + u32 hpcr[32]; /* 0x250 host port configure register */ + u8 res6[0x10]; + u32 csel; /* 0x2e0 controller select register */ +}; + +struct dram_para { + u32 clock; + u32 type; + u32 rank_num; + u32 density; + u32 io_width; + u32 bus_width; + u32 cas; + u32 zq; + u32 odt_en; + u32 size; + u32 tpr0; + u32 tpr1; + u32 tpr2; + u32 tpr3; + u32 tpr4; + u32 tpr5; + u32 emr1; + u32 emr2; + u32 emr3; +}; + +#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5) +#define DRAM_CCR_DQS_GATE (0x1 << 14) +#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17) +#define DRAM_CCR_ITM_OFF (0x1 << 28) +#define DRAM_CCR_DATA_TRAINING (0x1 << 30) +#define DRAM_CCR_INIT (0x1 << 31) + +#define DRAM_MEMORY_TYPE_DDR1 1 +#define DRAM_MEMORY_TYPE_DDR2 2 +#define DRAM_MEMORY_TYPE_DDR3 3 +#define DRAM_MEMORY_TYPE_LPDDR2 4 +#define DRAM_MEMORY_TYPE_LPDDR 5 +#define DRAM_DCR_TYPE (0x1 << 0) +#define DRAM_DCR_TYPE_DDR2 0x0 +#define DRAM_DCR_TYPE_DDR3 0x1 +#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1) +#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3) +#define DRAM_DCR_IO_WIDTH_8BIT 0x0 +#define DRAM_DCR_IO_WIDTH_16BIT 0x1 +#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3) +#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7) +#define DRAM_DCR_CHIP_DENSITY_256M 0x0 +#define DRAM_DCR_CHIP_DENSITY_512M 0x1 +#define DRAM_DCR_CHIP_DENSITY_1024M 0x2 +#define DRAM_DCR_CHIP_DENSITY_2048M 0x3 +#define DRAM_DCR_CHIP_DENSITY_4096M 0x4 +#define DRAM_DCR_CHIP_DENSITY_8192M 0x5 +#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6) +#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7) +#define DRAM_DCR_BUS_WIDTH_32BIT 0x3 +#define DRAM_DCR_BUS_WIDTH_16BIT 0x1 +#define DRAM_DCR_BUS_WIDTH_8BIT 0x0 +#define DRAM_DCR_NR_DLLCR_32BIT 5 +#define DRAM_DCR_NR_DLLCR_16BIT 3 +#define DRAM_DCR_NR_DLLCR_8BIT 2 +#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10) +#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3) +#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12) +#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13) +#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3) +#define DRAM_DCR_MODE_SEQ 0x0 +#define DRAM_DCR_MODE_INTERLEAVE 0x1 + +#define DRAM_CSR_FAILED (0x1 << 20) + +#define DRAM_DRR_TRFC(n) ((n) & 0xff) +#define DRAM_DRR_TREFI(n) (((n) & 0xffff) << 8) +#define DRAM_DRR_BURST(n) ((((n) - 1) & 0xf) << 24) + +#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0) +#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3) +#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2) +#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3) +#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4) +#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3) +#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6) +#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3) +#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8) +#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7) +#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11) +#define DRAM_MCR_RESET (0x1 << 12) +#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13) +#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3) +#define DRAM_MCR_DCLK_OUT (0x1 << 16) + +#define DRAM_DLLCR_NRESET (0x1 << 30) +#define DRAM_DLLCR_DISABLE (0x1 << 31) + +#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20) +#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff) + +#define DRAM_IOCR_ODT_EN(n) ((((n) & 0x3) << 30) | ((n) & 0x3) << 0) +#define DRAM_IOCR_ODT_EN_MASK DRAM_IOCR_ODT_EN(0x3) + +#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0) +#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7) +#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4) +#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7) +#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9) +#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7) +#define DRAM_MR_POWER_DOWN (0x1 << 12) + +#define DRAM_CSEL_MAGIC 0x16237495 + +unsigned long sunxi_dram_init(void); +unsigned long dramc_init(struct dram_para *para); + +#endif /* _SUNXI_DRAM_H */ -- 1.9.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot