Well.. In my case, exynos4 (trats2) is working fine until now.
On 05/13/2014 05:38 PM, Minkyu Kang wrote: > Dear Akshay Saraswat, > > On 13/05/14 14:00, Akshay Saraswat wrote: >> Used a script to recheck/verify pin mapping and existing mapping >> appears to be fine, returning correct bank and pin values. >> Did ./MAKEALL -a arm and found all Exynos/S5P related boards >> compiled successfully. >> Couldn't test booting over all of them. >> Tested U-Boot bootup over SMDK5420, SMDK5250, Snow. >> Requesting maintaners to please test over affected SoCs/boards. >> >> Changes in V2: >> - Enabled CMD_GPIO as suggested by Simon Glass >> and supported same for EXYNOS5. >> Changes in V3: >> - New patch added to rename S5P GPIO definitions >> to S5P_GPIO. >> - GPIO Table added to calculate the base address >> of input gpio bank. >> Changes in V4: >> - To have consistent 0..n-1 GPIO numbering the banks >> are divided into different parts where ever they >> have holes in them. >> - Function and table to support gpio command moved >> to s5p-gpio driver. >> - Rebased on latest u-boot-samsung tree. >> Changes in V5: >> - Rebased on latest u-boot-samsung tree. >> - Removed Exynos5 specific code in gpio driver api to >> get bank. >> - Added #define HAVE_GENERIC_GPIO in config file >> to remove conditinal CPU check in gpio driver. >> Changes in V6: >> - Isolated config changes in a new patch. >> - Updated patches with corresponding changes for Exynos 5420. >> Changes in V7: >> - Added changes for other SoCs like Exynos 4412, 4210 etc. >> Changes in V8: >> - Changed Subject of patch 2/2 to reflect affected SoCs/boards. >> - Fixed arndale board compile time errors introduced due to >> patch-set v7. >> Changes in V9: >> - Fixed checkpatch errors. >> - Fixed naming error in exynosxxxx_gpio_data arrays which could >> be the possible reason behind data abort witnessed over >> Exynos4 boards. >> Changes in v10: >> - Made arch-exynos/gpio.h -> arch/gpio.h. >> - Removed dead code. >> - Replaced exynos_gpio_get calls with corresponding pin number. >> - Edited pin numbmers in dts files. >> Changes in v11: >> - Created and fixed pinmux_config for Exynos 4412. >> - Removed dead code. >> Changes in v12: >> - Added change logs in individual patches. >> - Fixed few bugs and typos. >> - Added "Acked-by: Przemyslaw Marczak". >> Changes in v13: >> - Fixed typo by replacing EXYNOS5420_GPIO_B10 with >> EXYNOS5420_GPIO_B20 at line # 4149 of patch 1/2. >> >> Akshay Saraswat (2): >> S5P: Exynos: Add GPIO pin numbering and rename definitions >> S5P: Exynos: Config: Enable GPIO CMD config >> >> arch/arm/cpu/armv7/exynos/pinmux.c | 561 +++++---- >> arch/arm/dts/exynos4210-origen.dts | 4 +- >> arch/arm/dts/exynos4210-trats.dts | 6 +- >> arch/arm/dts/exynos4210-universal_c210.dts | 4 +- >> arch/arm/dts/exynos4412-trats2.dts | 4 +- >> arch/arm/include/asm/arch-exynos/cpu.h | 17 +- >> arch/arm/include/asm/arch-exynos/gpio.h | 1761 >> +++++++++++++++++++++++----- >> arch/arm/include/asm/arch-s5pc1xx/gpio.h | 948 ++++++++++++--- >> board/samsung/arndale/arndale.c | 11 +- >> board/samsung/goni/goni.c | 32 +- >> board/samsung/smdk5250/exynos5-dt.c | 20 +- >> board/samsung/smdk5250/smdk5250.c | 19 +- >> board/samsung/smdk5420/smdk5420.c | 15 +- >> board/samsung/smdkc100/smdkc100.c | 5 +- >> board/samsung/smdkv310/smdkv310.c | 19 +- >> board/samsung/trats/trats.c | 39 +- >> board/samsung/trats2/trats2.c | 74 +- >> board/samsung/universal_c210/universal.c | 51 +- >> drivers/gpio/s5p_gpio.c | 204 +++- >> include/configs/exynos5-dt.h | 2 + >> include/configs/s5p_goni.h | 4 +- >> include/configs/s5pc210_universal.h | 16 +- >> include/configs/smdkv310.h | 1 + >> include/configs/trats.h | 8 +- >> include/configs/trats2.h | 4 +- >> 25 files changed, 2918 insertions(+), 911 deletions(-) >> > > applied to u-boot-samsung. > > > Dear SAMSUNG developers, > > If you have any problem, please tell us immediately. > > Thanks, > Minkyu Kang. > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot