Hi Masahiro,

On 14 May 2014 06:55, Masahiro Yamada <yamad...@jp.panasonic.com> wrote:
> In SPL framework, SPL uses u-boot.img to load u-boot.bin.
> Here,
>     u-boot.img = uImage header + u-boot.bin
>
> To use OF control with a separate devicetree,
> u-boot.dtb must be placed right after u-boot.bin.
> In this case, u-boot-dtb.bin is generally used.
> Here,
>     u-boot-dtb.bin = u-boot.bin + u-boot.dtb
>
> We need u-boot-dtb.img to use both SPL framework
> and separate OF control at the same time.
>     u-boot-dtb.img = uImage header + u-boot-dtb.bin
>
> For example, Zynq boards already define all of
>   - CONFIG_SPL
>   - CONFIG_OF_CONTROL
>   - CONFIG_OF_SEPARATE
>
> So, the support of u-boot-dtb.img is urgent.

Acked-by: Simon Glass <s...@chromium.org>

FYI there is also a .lds file problem in some cases - see:

http://patchwork.ozlabs.org/patch/339609/
http://patchwork.ozlabs.org/patch/339603/

>
> Signed-off-by: Masahiro Yamada <yamad...@jp.panasonic.com>
> Cc: Michal Simek <michal.si...@xilinx.com>
> Cc: Simon Glass <s...@chromium.org>
> ---
>
>  Makefile | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/Makefile b/Makefile
> index e82f616..83d1cc6 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -752,6 +752,9 @@ ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
>  ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
>  ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
>  ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin
> +ifeq ($(CONFIG_SPL_FRAMEWORK),y)
> +ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
> +endif
>  ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
>  ifneq ($(CONFIG_SPL_TARGET),)
>  ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
> @@ -854,6 +857,11 @@ MKIMAGEFLAGS_u-boot.pbl = -n 
> $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
>  u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
>         $(call if_changed,mkimage)
>
> +MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
> +
> +u-boot-dtb.img: u-boot-dtb.bin FORCE
> +       $(call if_changed,mkimage)
> +
>  u-boot.sha1:   u-boot.bin
>                 tools/ubsha1 u-boot.bin
>
> --
> 1.8.3.2
>

Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to