On Sun, May 25, 2014 at 1:08 PM, Alexander Graf <ag...@suse.de> wrote: > > > On 24.05.14 09:23, Alon Bar-Lev wrote: >> >> On Thu, May 22, 2014 at 12:04 PM, Alexander Graf <ag...@suse.de> wrote: >>> >>> >>> On 22.05.14 09:52, Alon Bar-Lev wrote: >>>> >>>> Hi, >>>> >>>> Trying to run the qemu-ppce500 within qemu. I am using -bios u-boot.bin >>>> and no luck, I get live signal. >>>> >>>> I am using latest u-boot master and qemu master. >>>> >>>> Command: >>>> $ ./qemu-system-ppc -M ppce500 -nographic -bios u-boot.bin >>>> >>>> Tried to load u-boot as well, same. >>> >>> >>> Yes, that command should work with the right patches :). Unfortunately they >>> are not in master yet, but instead waiting in my queue: >>> >>> https://github.com/agraf/qemu >>> >>> Please give things a try with the ppc-next branch in there. That should get >>> things working for you. >>> >> WORKING! thanks! >> >> Is there any support for flush and/or mtd for this target (-drive >> if=pflash, -mtdblock)? > > > I haven't implemented pflash yet, sorry. Do you need the flash device for > configuration storage or as backing storage for your kernel? >
Well, I wish both... :) boot qemu as if it were a target.... 1. put u-boot on pflash, and boot from it. 2. have backing storage for kernel (can be mtd). 3. have data partition (can be mtd). we can skip (1) as -bios is good enough... but for (2), (3) I do not see solution but have either mtd or other block device support... is that possible? > > Alex > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot