Dear Wolfgang, Thank you very much.
As per your request, I executed the following mkimage command: mkimage -A arm -O u-boot -T standalone -C none -a 0x0c100000 -e 0x0c100000 -n "Hello World" -d hello_world.bin Hello.img Than, I transferred to the board using uboot loadb (followed by the kermit send command) and then launched the bootm ARNDALE5250 # bootm 0x43E00000 ## Booting kernel from Legacy Image at 43e00000 ... Image Name: Hello World Image Type: ARM U-Boot Standalone Program (uncompressed) Data Size: 594 Bytes = 594 Bytes Load Address: 0c100000 Entry Point: 0c100000 Verifying Checksum ... OK Loading Standalone Program ... OK OK Still, the program hangs at the above giving no sign of life. Please note I am using the arndale 5250 board, am I missing something? Can I try to write the hello world standalone into the microSD? what are dd parameters shall I use (e.g. seek)? Many thanks and best regards. -- View this message in context: http://u-boot.10912.n7.nabble.com/Standalone-application-issue-tp180515p180701.html Sent from the U-Boot mailing list archive at Nabble.com. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot