No comment on the commit itself, but does it really need all of the marketing BS at the top? On May 30, 2014 3:22 AM, "Alison Wang" <b18...@freescale.com> wrote:
> This series contain the support for Freescale LS102xA SoC and LS1021AQDS > board. > > The QorIQ LS1 family is built on Layerscape architecture, the industry's > first > software-aware, core-agnostic networking architecture to offer > unprecedented > efficiency and scale. > > Freescale LS102xA is a set of SoCs combines two ARM Cortex-A7 cores that > have > been optimized for high reliability and pack the highest level of > integration > available for sub-3 W embedded communications processors with Layerscape > architecture and with a comprehensive enablement model focused on ease of > programmability. > > For the detail information about LS1021AQDS board, please refer to README > in the patch. > > ---------------------------------------------------------------- > Alison Wang (5): > arm: ls102xa: Add Freescale LS102xA SoC support > arm: ls102xa: Add i2c support for LS102xA > arm: ls102xa: Add etsec support for LS102xA > arm: ls102xa: Add esdhc support for LS102xA > arm: ls102xa: Add basic support for LS1021AQDS board > > Claudiu Manoil (1): > net: Merge asm/fsl_enet.h into fsl_mdio.h > > York Sun (3): > driver/ddr/freescale: Add support of accumulate ECC > driver/ddr/freescale: Fix DDR3 driver for ARM > driver/ddr/fsl: Add support of overriding chip select write leveling > > arch/powerpc/include/asm/fsl_enet.h | 24 -- > board/freescale/ls1021aqds/Makefile | 8 + > board/freescale/ls1021aqds/README | 112 +++++++++ > board/freescale/ls1021aqds/ddr.c | 169 +++++++++++++ > board/freescale/ls1021aqds/ddr.h | 64 +++++ > board/freescale/ls1021aqds/ls1021aqds.c | 208 ++++++++++++++++ > board/freescale/ls1021aqds/ls1021aqds_qixis.h | 35 +++ > board/freescale/mpc8360emds/mpc8360emds.c | 2 +- > board/freescale/mpc837xemds/mpc837xemds.c | 1 - > boards.cfg | 1 + > drivers/ddr/fsl/arm_ddr_gen3.c | 2 +- > drivers/ddr/fsl/ctrl_regs.c | 8 + > drivers/ddr/fsl/interactive.c | 2 + > drivers/i2c/mxc_i2c.c | 2 +- > drivers/mmc/fsl_esdhc.c | 4 +- > drivers/net/fm/dtsec.c | 1 - > drivers/net/fm/fm.h | 2 +- > drivers/net/fm/init.c | 1 + > drivers/net/fm/memac.c | 1 - > drivers/net/fm/tgec.c | 1 - > drivers/net/fsl_mdio.c | 16 +- > drivers/net/tsec.c | 7 + > drivers/qe/uec.h | 1 - > include/common.h | 5 +- > include/configs/ls1021aqds.h | 418 > ++++++++++++++++++++++++++++++++ > include/fm_eth.h | 2 +- > include/fsl_ddr_sdram.h | 2 + > include/fsl_esdhc.h | 14 +- > include/fsl_mdio.h | 13 +- > include/tsec.h | 7 +- > 30 files changed, 1087 insertions(+), 46 deletions(-) > delete mode 100644 arch/powerpc/include/asm/fsl_enet.h > create mode 100644 board/freescale/ls1021aqds/Makefile > create mode 100644 board/freescale/ls1021aqds/README > create mode 100644 board/freescale/ls1021aqds/ddr.c > create mode 100644 board/freescale/ls1021aqds/ddr.h > create mode 100644 board/freescale/ls1021aqds/ls1021aqds.c > create mode 100644 board/freescale/ls1021aqds/ls1021aqds_qixis.h > create mode 100644 include/configs/ls1021aqds.h > > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
