On 05/23/2014 12:48 PM, Stephen Warren wrote: > From: Stephen Warren <swar...@nvidia.com> > > Currently, "mmc dev 0" does not change the selected HW partition. I > think it makes more sense if "mmc dev 0" is an alias for "mmc dev 0 0", > i.e. that HW partition 0 (main data area) is always selected by default > if the user didn't request a specific partition. Otherwise, the following > happens, which feels wrong: > > Select HW partition 1 (boot0): > mmc dev 0 1 > > Doesn't change the HW partition, so it's still 1 (boot0): > mmc dev 0 > > With this patch, the second command above re-selects the main data area. > > Note that some MMC devices (i.e. SD cards) don't support HW partitions. > However, this patch still works, since mmc_start_init() sets the current > partition number to 0, and mmc_select_hwpart() succeeds if the requested > partition is already selected.
Pantelis, does this series look good? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot