Hi,
On 05/31/2014 06:46 PM, Ian Campbell wrote:
On Fri, 2014-05-30 at 11:06 +0200, Hans de Goede wrote:
Add support for the Allwinner A10 SoC also know as the Allwinner sun4i family.
"known".
Could you enumerate the main differences vs the existing sun7i stuff.
e.g.:
- dram init and timing (hpcr?) values
- CCM_AHB_GATE_DLL
- ...
Fixed / done.
Signed-off-by: Henrik Nordstrom <hen...@henriknordstrom.net>
Signed-off-by: Stefan Roese <s...@denx.de>
Signed-off-by: Oliver Schinagl <oli...@schinagl.nl>
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
arch/arm/cpu/armv7/sunxi/Makefile | 2 +
arch/arm/cpu/armv7/sunxi/cpu_info.c | 7 ++++
arch/arm/cpu/armv7/sunxi/dram.c | 81 +++++++++++++++++++++++++++++++++++--
board/sunxi/Makefile | 1 +
board/sunxi/dram_cubieboard.c | 31 ++++++++++++++
boards.cfg | 1 +
Please mention that you are enabling cb with this patch in the commit
message.
Done.
static void mctl_set_drive(void)
{
struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+#ifdef CONFIG_SUN7I
clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28),
+#else
+ clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3),
+#endif
This could be written as an ifdef around the "0x3<< 28 |" only (moved to
its own line). Is that a better way though?
I believe that that only will make the code harder to read, so lets keep this
as is.
@@ -490,6 +549,22 @@ unsigned long dramc_init(struct dram_para *para)
mctl_enable_dllx(para->tpr3);
+#ifdef CONFIG_SUN4I
+ /* set odt impendance divide ratio */
"impedance"
Fixed.
Thanks for the review.
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot