On 13:37 Wed 13 May , Achim Ehrlich wrote: > Jens Gehrlein schrieb: > > Wolfgang Denk schrieb: > >> Dear Achim Ehrlich, > >> > >> In message <4a0969fc.2060...@taskit.de> you wrote: > >>> The timeout for lost packages in tftp.c is defined to 5000 msecs. But > >>> when setting the timeout get_timer(0) is called in NetSetTimeout in > >>> net.c. > >>> But on AT91 the timer code returns usecs and not msecs resulting in a > >>> timeout of 5 ms instead of 5 secs, which is kind of short. I looked > >>> in the timer code of other ARM-based platforms and they seem to use > >>> usec-based timers as well. > >>> Of course I can change the defined timeout in tftp.c to one second or > >>> so, but that doesn't seem to be the right way to solve this issue. > >>> > >>> Any suggestions or ideas or do I miss something here? > >> > >> Any chance that you are using an old version of U-Boot? > > > > Hi Achim, > > > > I'm interested in this, too. I observed timeouts on ARM11 (MX31), > > but couldn't do any investigation due to other projects. > > > > I'm working on a custom developed board with AT91Sam9G20 and on the > current at91-tree of u-boot, so all new. I will do further work this > afternoon on this issue. which value do you put in the CONFIG_SYS_HZ?
if you can send patch we could take a look on this Best Regards, J. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot