Hi Tim, On 05/06/2014 12:44, Tim Harvey wrote: > On Wed, May 7, 2014 at 10:24 PM, Tim Harvey <thar...@gateworks.com> wrote: >> The IMX6QUAD/DUAL have SATA, but the IMX6SOLO/DL do not. Return >> instead of configuring the SATA clock and GPR13 registers. >> >> Signed-off-by: Tim Harvey <thar...@gateworks.com> >> --- >> arch/arm/imx-common/sata.c | 7 ++++++- >> 1 file changed, 6 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm/imx-common/sata.c b/arch/arm/imx-common/sata.c >> index 2e69486..c10dd28 100644 >> --- a/arch/arm/imx-common/sata.c >> +++ b/arch/arm/imx-common/sata.c >> @@ -8,13 +8,18 @@ >> #include <asm/arch/iomux.h> >> #include <asm/io.h> >> #include <asm/arch/clock.h> >> +#include <asm/arch/sys_proto.h> >> >> int setup_sata(void) >> { >> struct iomuxc_base_regs *const iomuxc_regs >> = (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR; >> + int ret; >> >> - int ret = enable_sata_clock(); >> + if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D)) >> + return 1; >> + >> + ret = enable_sata_clock(); >> if (ret) >> return ret; >> >> -- >> 1.8.3.2 >> > > Stefano, > > Any comments? >
No comments. In my queue it is ready-to-be-applied. I will do it after the whole SPL series. My plan is to apply them until the end of the week. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot