Hi Tom, On Fri, 6 Jun 2014 17:56:51 -0400, Tom Rini <tr...@ti.com> wrote:
> Hello, > > The following changes since commit cc49da249cf2f380d2fed5571fad65ce6494fc95: > > Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' (2014-06-02 > 08:43:48 +0200) > > are available in the git repository at: > > > git://git.denx.de/u-boot-ti.git master > > for you to fetch changes up to 83bad1026b9e3a4f6b7783cc1cbb434c1bbd3fa2: > > arm:am43xx: Add TPS65218 support to scale voltages up (2014-06-06 17:46:16 > -0400) > > ---------------------------------------------------------------- > Brian Norris (2): > mtd: nand: don't use read_buf for 8-bit ONFI transfers > mtd: nand: force NAND_CMD_READID onto 8-bit bus > > David Mosberger (1): > mtd: nand: fix GET/SET_FEATURES address on 16-bit devices > > Hannes Petermaier (6): > arch-am33xx: Add defines for timer0-7 > board/BuR/common: introduce usage of CONFIG_SYS_GENERIC_BOARD > board/BuR/tseries: Add support for using 8-bit on eMMC > board/BuR/tseries: only run gpmc_init(...) in NAND-build > board/BuR/common: Add CONFIG_CMD_I2C > board/BuR/tseries: cosmetic changes > > Jeroen Hofstee (1): > tam3517: fix NAND detection > > Lokesh Vutla (2): > ARM: AM43xx: Fix mmcboot command in EXTRA_ENV_SETTINGS > ARM: AM43xx: Fix UART clocks enabling > > Murali Karicheri (1): > keystone: init: enable UART1 to be able use it from kernel > > Sourav Poddar (2): > am43xx_evm: Add qspiboot target > ti: qspi: populate slave device to set flash quad bit. > > Tom Rini (6): > arm:am33xx: Make dram_init call sdram_init() in some contexts > arm:am33xx: Rework s_init and add board_early_init_f > am43xx: Only read the MPU frequency bits of CTRL_DEV_ATTR > arm:am33xx: Add a scale_vcores() hook > power: Add support for the TPS65218 PMIC > arm:am43xx: Add TPS65218 support to scale voltages up > > WingMan Kwok (1): > keystone: k2hk: enable support of nand ecclayout command > > pekon gupta (12): > mtd: nand: omap_elm: remove #include omap_gpmc.h > mtd: nand: omap_elm: use bch_type instead of nibble count to > differentiate between BCH4/BCH8/BCH16 > mtd: nand: omap_elm: use macros for register definitions > mtd: nand: omap_gpmc: remove unused members of 'struct nand_bch_priv' > mtd: nand: omap_gpmc: rename struct nand_bch_priv to struct > omap_nand_info > mtd: nand: omap_gpmc: minor cleanup of omap_correct_data_bch > mtd: nand: omap: fix error-codes returned from omap-elm driver > mtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate NAND > device bus-width > omap3: remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT and > GPMC_NAND_ECC_LP_x16_LAYOUT > mtd: nand: omap_gpmc: use macro for register definitions > mtd: nand: omap: add support for BCH16_ECC - NAND driver updates > am335x: update README for BCH16 > > arch/arm/cpu/armv7/am33xx/board.c | 20 +- > arch/arm/cpu/armv7/am33xx/clock.c | 11 ++ > arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 9 + > arch/arm/cpu/armv7/am33xx/emif4.c | 4 + > arch/arm/cpu/armv7/keystone/init.c | 9 + > arch/arm/cpu/armv7/omap3/mem.c | 12 -- > arch/arm/include/asm/arch-am33xx/clock.h | 1 + > arch/arm/include/asm/arch-am33xx/cpu.h | 35 +++- > arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 2 - > arch/arm/include/asm/arch-keystone/hardware.h | 3 + > arch/arm/include/asm/arch-omap3/mem.h | 8 - > board/BuR/tseries/board.c | 2 + > board/BuR/tseries/mux.c | 9 +- > board/compulab/cm_t35/cm_t35.c | 12 +- > board/ti/am43xx/Makefile | 2 +- > board/ti/am43xx/board.c | 55 +++++- > boards.cfg | 1 + > doc/README.nand | 60 ++++++ > drivers/mtd/nand/am335x_spl_bch.c | 2 +- > drivers/mtd/nand/atmel_nand.c | 2 +- > drivers/mtd/nand/nand_base.c | 11 +- > drivers/mtd/nand/nand_spl_simple.c | 2 +- > drivers/mtd/nand/omap_elm.c | 28 ++- > drivers/mtd/nand/omap_gpmc.c | 193 > +++++++++++++------- > drivers/power/pmic/Makefile | 1 + > drivers/power/pmic/pmic_tps65218.c | 97 ++++++++++ > drivers/spi/ti_qspi.c | 1 + > include/configs/am3517_crane.h | 1 + > include/configs/am43xx_evm.h | 45 ++++- > include/configs/bur_am335x_common.h | 4 +- > include/configs/cm_t335.h | 1 - > include/configs/cm_t35.h | 1 - > include/configs/devkit8000.h | 1 + > include/configs/dig297.h | 1 + > include/configs/k2hk_evm.h | 4 +- > include/configs/omap3_beagle.h | 1 + > include/configs/omap3_evm_common.h | 2 +- > include/configs/omap3_igep00x0.h | 1 + > include/configs/omap3_logic.h | 1 + > include/configs/omap3_overo.h | 1 + > include/configs/omap3_zoom1.h | 1 + > include/configs/pengwyn.h | 1 - > include/configs/tam3517-common.h | 2 + > include/configs/tao3530.h | 2 +- > include/configs/ti_am335x_common.h | 9 + > include/configs/ti_armv7_common.h | 3 +- > include/configs/tseries.h | 1 - > include/linux/mtd/nand.h | 19 ++ > include/linux/mtd/omap_elm.h | 11 +- > include/linux/mtd/omap_gpmc.h | 11 +- > include/power/tps65218.h | 63 +++++++ > 51 files changed, 624 insertions(+), 155 deletions(-) > create mode 100644 drivers/power/pmic/pmic_tps65218.c > create mode 100644 include/power/tps65218.h > Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
