Hi Felipe,
On Jun 10, 2014 11:45 AM, "Felipe Balbi" <ba...@ti.com> wrote:
>
> pass correct PHY Address when running on SK
> so that we have working ethernet with this board
> too.
>
> Signed-off-by: Felipe Balbi <ba...@ti.com>
> ---
> board/ti/am43xx/board.c | 21 +++++++++++++--------
> 1 file changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
> index b184c20..054a452 100644
> --- a/board/ti/am43xx/board.c
> +++ b/board/ti/am43xx/board.c
> @@ -227,16 +227,16 @@ static const struct emif_regs
ddr3_sk_emif_regs_400Mhz = {
> .read_idle_ctrl = 0x00050000,
> .zq_config = 0x50074be4,
> .temp_alert_config = 0x0,
> - .emif_ddr_phy_ctlr_1 = 0x0e084007,
> + .emif_ddr_phy_ctlr_1 = 0x0e084008,
> .emif_ddr_ext_phy_ctrl_1 = 0x08020080,
> - .emif_ddr_ext_phy_ctrl_2 = 0x00700070,
> - .emif_ddr_ext_phy_ctrl_3 = 0x00700070,
> - .emif_ddr_ext_phy_ctrl_4 = 0x00700070,
> - .emif_ddr_ext_phy_ctrl_5 = 0x00700070,
> + .emif_ddr_ext_phy_ctrl_2 = 0x89,
> + .emif_ddr_ext_phy_ctrl_3 = 0x90,
> + .emif_ddr_ext_phy_ctrl_4 = 0x8e,
> + .emif_ddr_ext_phy_ctrl_5 = 0x8d,
> .emif_rd_wr_lvl_rmp_win = 0x0,
> - .emif_rd_wr_lvl_rmp_ctl = 0x0,
> - .emif_rd_wr_lvl_ctl = 0x0,
> - .emif_rd_wr_exec_thresh = 0x00000405
> + .emif_rd_wr_lvl_rmp_ctl = 0x00000000,
> + .emif_rd_wr_lvl_ctl = 0x00000000,
> + .emif_rd_wr_exec_thresh = 0x00000000,
> };
Merge this hunk with the previous patch in the series?
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
