On 05/28/2014 01:48 AM, Shaveta Leekha wrote: > SerDes PLL is calibrated at reset. When the junction temperature > delta from the time the PLL is calibrated exceeds +56C/-66C, > jitter may increase and can cause PLL to unlock. > > This workaround overwrite the SerDes registers with new values, > to calibrate SerDes registers. > These values are known to work fine for all temperature ranges. > > This workaround is valid for B4, T4 and T2 platforms, so > added in their config. > > Signed-off-by: Shaveta Leekha <shav...@freescale.com> > Signed-off-by: Poonam Aggrwal <poonam.aggr...@freescale.com> > ---
Applied to u-boot-mpc85xx. Sorry for the late notice. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot