The code in misc_init_r() verifies actual SERDES clocks versus
expected. It supposes that the number of clocks is MAX_SERDES.
However, the number of pllcr0 registers is only SRDS_MAX_BANK. This
clearly results in access to wrong memory. I don't have the datasheet
to design a correct solution, but at least let's change it to access
only the existing registers.
Signed-off-by: Vasili Galka <vvv...@gmail.com>
Cc: York Sun <york...@freescale.com>
---
board/freescale/t4qds/t4240qds.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/board/freescale/t4qds/t4240qds.c b/board/freescale/t4qds/t4240qds.c
index fe1bc7f..6646042 100644
--- a/board/freescale/t4qds/t4240qds.c
+++ b/board/freescale/t4qds/t4240qds.c
@@ -662,7 +662,7 @@ int misc_init_r(void)
}
}
- for (i = 0; i < MAX_SERDES; i++) {
+ for (i = 0; i < SRDS_MAX_BANK; i++) {
u32 pllcr0 = srds_regs->bank[i].pllcr0;
u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
if (expected != actual[i]) {
--
1.7.9
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
