On Thu, Jun 12, 2014 at 07:24:46AM -0600, Simon Glass wrote: > This file has code in three different categories: > - Command processing > - OS-specific boot code > - Locating images and setting up to boot > > Only the first category really belongs in a file called cmd_bootm.c. > > Leave the command processing code where it is. Split out the OS-specific > boot code into bootm_os.c. Split out the other code into bootm.c > > Header files and extern declarations are tidied but otherwise no code > changes are made, to make it easier to review. > > Signed-off-by: Simon Glass <s...@chromium.org>
This, on am335x GP EVM doing UART booting (you can replicate the same on beaglebone black with no SD card / nothing bootable on eMMC and holing down the "user" button for the first boot, SYSBOOT pins will be set until next hard power cycle) causes: Sending /tmp/u-boot-spl.bin, 646 blocks: Give your local XMODEM receive command now. Bytes Sent: 82816 BPS:10461 Transfer complete Sending: u-boot.img Ymodem sectors/kbytes sent: 3433/429kyzModem - CRC mode, 4(SOH)/438(STX)/0(CAN) packets, 2 retries Loaded 448676 bytes No valid FDT found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb> initcall sequence 8085d568 failed at call 8083e678 ### ERROR ### Please RESET the board ### -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
