On 14-06-23 12:01 AM, Youngmin Nam wrote:
Hello expert.
I'm trying to run ARMv8 u-boot on fast model. Exactly on Coretex-A57×4 In
FVP_VE
When I run command "model_shell64 cadi_system_Linux64-Release-GCC-4.6.so
u-boot.elf"
There isn't any pop up xterm terminal.
My fast model version is 8.3 and I used vexpress_aemv8a configuration on
denx u-boot mainline.
Does any body test armv8 u-boot on fast model?
Yes - but...
(1) I am testing vexpress_aemv8a_semi; which is not in master yet -- see:
http://patchwork.ozlabs.org/patch/357577/
(2) I have inherited a script which "does everything"... However, the
fundamental piece is:
./Linux-Release-GCC-4.6/isim_system -C pctl.startup=0.0.0.0 -C
bp.secure_memory=0 -C cache_state_modelled=0 -C
bp.pl011_uart0.untimed_fifos=1 -C bp.secureflashloader.fname=bl1.bin
Note: this process actually launches a bootloader (bl1.bin); which is
then used to launch U-Boot...
I hope this helps,
Thanks, Steve
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
