On 07/01/2014 01:22 PM, Jörg Krause wrote:
On 07/01/2014 01:19 PM, Marek Vasut wrote:
[snip]
Can you edit arch/arm/cpu/arm926ejs/cache.c and change the debug() to
printf() , then re-test please ? I suspect this might trap something
still. Ah, and please test on u-boot-usb/master with this patch.
No additional output on the console.
What does this mean? Do you see warning messages prefixed with
"CACHE: " ?
No messages prefixed with "CACHE: ". Just the usual error message.
I am sorry, but maybe I edited arch/arm/cpu/arm926ejs/ in a another
branch and compiled in u-boot-usb. If I run now tftp with printf enabled
in arch/arm/cpu/arm926ejs/cache.c I get the following "CACHE: " messages:
CACHE: Misaligned operation at range [40008000, 4000c653]
CACHE: Misaligned operation at range [43fd0b0c, 43fd0b60]
=>
using ci_udc, OUT ep- IN ep- STATUS ep-
MAC 00:19:b8:00:00:02
HOST MAC 00:19:b8:00:00:01
high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet
ERROR: The remote end did not respond in time.
at drivers/usb/gadget/ether.c:2392/usb_eth_init()
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
