>From: Igor Grinberg [mailto:grinb...@compulab.co.il] >Hi Pekon, > >On 07/04/14 22:05, Pekon Gupta wrote: >> This patch series adds support for parallel NAND devices support connected >> via >> GPMC chip-select on various boards belonging to AM33xx and OMAPx platforms. >> This series also moves some board specific CONFIG_NAND_xx from generic files >> to individual files. >> >> Tested using: ./MAKEALL -s am33xx -s omap3 -s oamp4 -s omap5 >> works fine except for am335x_boneblack_vboot >> build breaks for am335x_boneblack_vboot for un-related reasons >> u-boot/scripts/dtc-version.sh: line 17: dtc: command not found > >This is obvious, apparently beagle bone black wants to use the DT for U-Boot >and you don't have dtc installed or it is not in your PATH. > Yes, my bad. I was expecting dtc to be part of $UBOOT/scripts/... as in linux. ' am335x_boneblack_vboot' builds cleanly after I fix my $PATH to point to linux kernel dtc. ------------------ Configuring for am335x_boneblack_vboot - Board: am335x_evm, Options: SERIAL1,CONS_INDEX=1,EMMC_BOOT,ENABLE_VBOOT text data bss dec hex filename 367622 12722 8693820 9074164 8a75f4 ./u-boot 72795 3084 198024 273903 42def ./spl/u-boot-spl ------------------
One request, as [PATCH 1/7] touches some non-TI board configs, So some tested-by would help here to confirm that this patch isn't breaking anything. with regards, pekon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot