Add support for re-relocation malloc() in arm's start-up code.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2: None
README | 3 +++
arch/arm/lib/crt0.S | 4 ++++
2 files changed, 7 insertions(+)
diff --git a/README b/README
index 7450750..46f8f3c 100644
--- a/README
+++ b/README
@@ -3729,6 +3729,9 @@ Configuration Settings:
The memory will be freed (or in fact just forgotton) when
U-Boot relocates itself.
+ Pre-relocation malloc() is only supported on ARM at present
+ but is fairly easy to enable for other archs.
+
- CONFIG_SYS_BOOTM_LEN:
Normally compressed uImages are limited to an
uncompressed size of 8 MBytes. If this is not enough,
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
index bbf3e41..9e81cd9 100644
--- a/arch/arm/lib/crt0.S
+++ b/arch/arm/lib/crt0.S
@@ -77,6 +77,10 @@ clr_gd: cmp r1, r2 /* while not at
end of BSS */
strlo r0, [r1] /* clear 32-bit BSS word */
addlo r1, r1, #4 /* move to next */
blo clr_gd
+#if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SPL_BUILD)
+ sub sp, sp, #CONFIG_SYS_MALLOC_F_LEN
+ str sp, [r9, #GD_MALLOC_BASE]
+#endif
mov r0, #0
bl board_init_f
--
2.0.0.526.g5318336
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
