On Fri, Jul 04, 2014 at 06:07:09AM -0700, Prafulla Wadaskar wrote: > > > > -----Original Message----- > > From: Luka Perkov [mailto:l...@openwrt.org] > > Sent: 02 July 2014 05:48 > > To: u-boot@lists.denx.de > > Cc: l...@openwrt.org; Prafulla Wadaskar; Stefan Roese > > Subject: [PATCH] kirkwood: define empty > > CONFIG_MVGBE_PORTS by default > > > > Each board with defines it's own set of values. If we > > do not define > > CONFIG_MVGBE_PORTS we will hit following error: > > > > mvgbe.c: In function 'mvgbe_initialize': > > mvgbe.c:700:34: error: 'CONFIG_MVGBE_PORTS' undeclared > > (first use in this function) > > u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS; > > > > This patch fixes above described problem. > > > > Signed-off-by: Luka Perkov <l...@openwrt.org> > > CC: Prafulla Wadaskar <prafu...@marvell.com> > > CC: Stefan Roese <s...@denx.de> > > --- > > drivers/net/mvgbe.c | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c > > index 0cd06b6..d558f59 100644 > > --- a/drivers/net/mvgbe.c > > +++ b/drivers/net/mvgbe.c > > @@ -35,6 +35,10 @@ > > > > DECLARE_GLOBAL_DATA_PTR; > > > > +#ifndef CONFIG_MVGBE_PORTS > > +# define CONFIG_MVGBE_PORTS {0, 0} > > +#endif > > + > > #define MV_PHY_ADR_REQUEST 0xee > > #define MVGBE_SMI_REG (((struct mvgbe_registers > > *)MVGBE0_BASE)->smi) > > > > This is generic to network driver, to be picked up by net custodian.. > > +Joe > > Acked-by: Prafulla Wadaskar <prafu...@marvell.com> >
It's in the marvell driver so please just pick it up, thanks. -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
