This has been disabled for ARM in initr_scsi since that function was
introduced. However it works fine for me on Cubieboard and Cubietruck (with the
upcoming AHCI glue patch).
I also tested on two random ARM platforms which seem to define CONFIG_CMD_SCSI:
- highbank worked fine (on midway hardware)
- omap5_uevm built OK and I confirmed using objdump that things were as
expected (i.e. the default weak scsi_init nop was used).
While there remove the mismatched comment from the #endif (omitting the comment
seems to be the prevailing style in this file) and add a missing return to
initr_doc which I happened to spot while editing.
Signed-off-by: Ian Campbell <i...@hellion.org.uk>
Cc: Simon Glass <s...@chromium.org>
---
common/board_r.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/common/board_r.c b/common/board_r.c
index 602a239..427ee67 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -588,21 +588,19 @@ static int initr_status_led(void)
#if defined(CONFIG_CMD_SCSI)
static int initr_scsi(void)
{
- /* Not supported properly on ARM yet */
-#ifndef CONFIG_ARM
puts("SCSI: ");
scsi_init();
-#endif
return 0;
}
-#endif /* CONFIG_CMD_NET */
+#endif
#if defined(CONFIG_CMD_DOC)
static int initr_doc(void)
{
puts("DOC: ");
doc_init();
+ return 0
}
#endif
--
2.0.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
