From: Graf Yang <graf.y...@analog.com>
The timer_init() function was not using the right csync instruction, nor
was it doing it right after disabling the core timer.
The timer_reset() function would reset the timestamp, but not the actual
timer, so there was a common edge case where get_timer() return a jump of
one timestamp (couple milliseconds) right after resetting. This caused
many functions to improperly timeout right away.
Signed-off-by: Graf Yang <graf.y...@analog.com>
Signed-off-by: Mike Frysinger <vap...@gentoo.org>
---
cpu/blackfin/interrupts.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/cpu/blackfin/interrupts.c b/cpu/blackfin/interrupts.c
index d4dd636..bf6fb4b 100644
--- a/cpu/blackfin/interrupts.c
+++ b/cpu/blackfin/interrupts.c
@@ -95,11 +95,12 @@ void udelay(unsigned long usec)
int timer_init(void)
{
*pTCNTL = 0x1;
+ CSYNC();
*pTSCALE = 0x0;
*pTCOUNT = MAX_TIM_LOAD;
*pTPERIOD = MAX_TIM_LOAD;
*pTCNTL = 0x7;
- asm("CSYNC;");
+ CSYNC();
timestamp = 0;
last_time = 0;
@@ -151,5 +152,5 @@ ulong get_timer(ulong base)
void reset_timer(void)
{
- timestamp = 0;
+ timer_init();
}
--
1.6.3.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
