Hello Thierry,
Am 26.08.2014 17:33, schrieb Thierry Reding:
From: Thierry Reding<tred...@nvidia.com>
i2c_bus_init() takes a bus number but relies on the currently selected
bus to determine which adapter to initialize. Make the function use the
bus passed in as parameter rather than the currently selected bus. While
at it, keep a pointer to the specified bus to avoid having to look it up
repeatedly.
Signed-off-by: Thierry Reding<tred...@nvidia.com>
---
drivers/i2c/i2c_core.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
Why you could not use the current CONFIG_SYS_I2C API and init a bus with
i2c_set_bus_num()?
i2c_init_bus() is deprecated and should be removed if all i2c drivers are
ported to the CONFIG_SYS_I2C framework ...
bye,
Heiko
diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c
index 18d6736601c1..cca455bc9c63 100644
--- a/drivers/i2c/i2c_core.c
+++ b/drivers/i2c/i2c_core.c
@@ -214,17 +214,20 @@ static int i2c_mux_disconnet_all(void)
* Initializes one bus. Will initialize the parent adapter. No current bus
* changes, no mux (if any) setup.
*/
-static void i2c_init_bus(unsigned int bus_no, int speed, int slaveaddr)
+static void i2c_init_bus(unsigned int bus, int speed, int slaveaddr)
{
- if (bus_no>= CONFIG_SYS_NUM_I2C_BUSES)
+ struct i2c_adapter *adapter;
+
+ if (bus>= CONFIG_SYS_NUM_I2C_BUSES)
return;
- I2C_ADAP->init(I2C_ADAP, speed, slaveaddr);
+ adapter = i2c_get_adapter(I2C_ADAPTER(bus));
+ adapter->init(adapter, speed, slaveaddr);
if (gd->flags& GD_FLG_RELOC) {
- I2C_ADAP->init_done = 1;
- I2C_ADAP->speed = speed;
- I2C_ADAP->slaveaddr = slaveaddr;
+ adapter->init_done = 1;
+ adapter->speed = speed;
+ adapter->slaveaddr = slaveaddr;
}
}
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
