From: Nitin Garg <nitin.g...@freescale.com>
i.MX6 SoC has onChip temperature sensor. Add support
for this sensor.
Signed-off-by: Nitin Garg <nitin.g...@freescale.com>
---
arch/arm/cpu/armv7/mx6/soc.c | 138 +++++++-
arch/arm/imx-common/cpu.c | 7 +-
arch/arm/include/asm/arch-mx6/crm_regs.h | 543 +++++++++++++++++++++++++++++-
arch/arm/include/asm/arch-mx6/imx-regs.h | 9 +-
4 files changed, 693 insertions(+), 4 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index ac84a1f..b0c1306 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -2,7 +2,7 @@
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2009-2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -35,6 +35,16 @@ struct scu_regs {
u32 fpga_rev;
};
+#define TEMPERATURE_MIN -40
+#define TEMPERATURE_HOT 80
+#define TEMPERATURE_MAX 125
+#define FACTOR1 15976
+#define FACTOR2 4297157
+#define MEASURE_FREQ 327
+
+#define REG_VALUE_TO_CEL(ratio, raw) \
+ ((raw_n40c - raw) * 100 / ratio - 40)
+
u32 get_nr_cpus(void)
{
struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
@@ -218,6 +228,132 @@ static void imx_set_wdog_powerdown(bool enable)
writew(enable, &wdog2->wmcr);
}
+#ifdef CONFIG_IMX6_TEMP_SENSOR
+static int read_cpu_temperature(u32 *fuse)
+{
+ int temperature;
+ unsigned int ccm_ccgr2;
+ unsigned int reg, tmp;
+ unsigned int raw_25c, raw_n40c, ratio;
+ struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+ struct fuse_bank *bank = &ocotp->bank[1];
+ struct fuse_bank1_regs *fuse_bank1 =
+ (struct fuse_bank1_regs *)bank->fuse_regs;
+
+ /* need to make sure pll3 is enabled for thermal sensor */
+ if ((readl(&anatop->usb1_pll_480_ctrl) &
+ BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0) {
+ /* enable pll's power */
+ writel(BM_ANADIG_USB1_PLL_480_CTRL_POWER,
+ &anatop->usb1_pll_480_ctrl_set);
+ writel(0x80, &anatop->ana_misc2_clr);
+ /* wait for pll lock */
+ while ((readl(&anatop->usb1_pll_480_ctrl) &
+ BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0)
+ ;
+ /* disable bypass */
+ writel(BM_ANADIG_USB1_PLL_480_CTRL_BYPASS,
+ &anatop->usb1_pll_480_ctrl_clr);
+ /* enable pll output */
+ writel(BM_ANADIG_USB1_PLL_480_CTRL_ENABLE,
+ &anatop->usb1_pll_480_ctrl_set);
+ }
+
+ ccm_ccgr2 = readl(&mxc_ccm->CCGR2);
+ /* enable OCOTP_CTRL clock in CCGR2 */
+ writel(ccm_ccgr2 | MXC_CCM_CCGR2_OCOTP_CTRL_MASK, &mxc_ccm->CCGR2);
+ *fuse = readl(&fuse_bank1->ana1);
+
+ /* restore CCGR2 */
+ writel(ccm_ccgr2, &mxc_ccm->CCGR2);
+
+ if (*fuse == 0 || *fuse == 0xffffffff || (*fuse & 0xfff00000) == 0)
+ return TEMPERATURE_MIN;
+
+ /*
+ * fuse data layout:
+ * [31:20] sensor value @ 25C
+ * [19:8] sensor value of hot
+ * [7:0] hot temperature value
+ */
+ raw_25c = *fuse >> 20;
+
+ /*
+ * The universal equation for thermal sensor
+ * is slope = 0.4297157 - (0.0015976 * 25C fuse),
+ * here we convert them to integer to make them
+ * easy for counting, FACTOR1 is 15976,
+ * FACTOR2 is 4297157. Our ratio = -100 * slope
+ */
+ ratio = ((FACTOR1 * raw_25c - FACTOR2) + 50000) / 100000;
+
+ debug("Thermal sensor with ratio = %d\n", ratio);
+
+ raw_n40c = raw_25c + (13 * ratio) / 20;
+
+ /*
+ * now we only use single measure, every time we read
+ * the temperature, we will power on/down anadig thermal
+ * module
+ */
+ writel(BM_ANADIG_TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_clr);
+ writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
+
+ /* write measure freq */
+ reg = readl(&anatop->tempsense1);
+ reg &= ~BM_ANADIG_TEMPSENSE1_MEASURE_FREQ;
+ reg |= MEASURE_FREQ;
+ writel(reg, &anatop->tempsense1);
+
+ writel(BM_ANADIG_TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_clr);
+ writel(BM_ANADIG_TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
+ writel(BM_ANADIG_TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_set);
+
+ while ((readl(&anatop->tempsense0) &
+ BM_ANADIG_TEMPSENSE0_FINISHED) == 0)
+ udelay(10000);
+
+ reg = readl(&anatop->tempsense0);
+ tmp = (reg & BM_ANADIG_TEMPSENSE0_TEMP_VALUE)
+ >> BP_ANADIG_TEMPSENSE0_TEMP_VALUE;
+ writel(BM_ANADIG_TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
+
+ if (tmp <= raw_n40c)
+ temperature = REG_VALUE_TO_CEL(ratio, tmp);
+ else
+ temperature = TEMPERATURE_MIN;
+ /* power down anatop thermal sensor */
+ writel(BM_ANADIG_TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_set);
+ writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_clr);
+
+ return temperature;
+}
+
+void check_cpu_temperature(void)
+{
+ int cpu_tmp = 0;
+ u32 fuse = ~0;
+
+ cpu_tmp = read_cpu_temperature(&fuse);
+ while (cpu_tmp > TEMPERATURE_MIN && cpu_tmp < TEMPERATURE_MAX) {
+ if (cpu_tmp >= TEMPERATURE_HOT) {
+ printf("CPU is %d C, too hot to boot, waiting...\n",
+ cpu_tmp);
+ udelay(5000000);
+ cpu_tmp = read_cpu_temperature(&fuse);
+ } else {
+ break;
+ }
+ }
+ if (cpu_tmp > TEMPERATURE_MIN && cpu_tmp < TEMPERATURE_MAX)
+ printf("CPU: Temperature %d C\n", cpu_tmp);
+ else
+ printf("CPU: Temperature: invalid data, fuse: 0x%x\n", fuse);
+}
+#endif
+
static void set_ahb_rate(u32 val)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index ed826a0..7253d37 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -2,7 +2,7 @@
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2009-2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -139,6 +139,11 @@ int print_cpuinfo(void)
(cpurev & 0x000F0) >> 4,
(cpurev & 0x0000F) >> 0,
mxc_get_clock(MXC_ARM_CLK) / 1000000);
+
+#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_TEMP_SENSOR)
+ check_cpu_temperature();
+#endif
+
printf("Reset cause: %s\n", get_reset_cause());
return 0;
}
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h
b/arch/arm/include/asm/arch-mx6/crm_regs.h
index e67b5b9..66a7cea 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011-2014 Freescale Semiconductor, Inc. All Rights Reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -1061,4 +1061,545 @@ struct mxc_ccm_reg {
#define BF_ANADIG_PFD_528_PFD0_FRAC(v) \
(((v) << 0) & BM_ANADIG_PFD_528_PFD0_FRAC)
+#define HW_ANADIG_REG_1P1 (0x00000110)
+#define HW_ANADIG_REG_1P1_SET (0x00000114)
+#define HW_ANADIG_REG_1P1_CLR (0x00000118)
+#define HW_ANADIG_REG_1P1_TOG (0x0000011c)
+
+#define BP_ANADIG_REG_1P1_RSVD2 18
+#define BM_ANADIG_REG_1P1_RSVD2 0xFFFC0000
+#define BF_ANADIG_REG_1P1_RSVD2(v) \
+ (((v) << 18) & BM_ANADIG_REG_1P1_RSVD2)
+#define BM_ANADIG_REG_1P1_OK_VDD1P1 0x00020000
+#define BM_ANADIG_REG_1P1_BO_VDD1P1 0x00010000
+#define BP_ANADIG_REG_1P1_RSVD1 13
+#define BM_ANADIG_REG_1P1_RSVD1 0x0000E000
+#define BF_ANADIG_REG_1P1_RSVD1(v) \
+ (((v) << 13) & BM_ANADIG_REG_1P1_RSVD1)
+#define BP_ANADIG_REG_1P1_OUTPUT_TRG 8
+#define BM_ANADIG_REG_1P1_OUTPUT_TRG 0x00001F00
+#define BF_ANADIG_REG_1P1_OUTPUT_TRG(v) \
+ (((v) << 8) & BM_ANADIG_REG_1P1_OUTPUT_TRG)
+#define BM_ANADIG_REG_1P1_RSVD0 0x00000080
+#define BP_ANADIG_REG_1P1_BO_OFFSET 4
+#define BM_ANADIG_REG_1P1_BO_OFFSET 0x00000070
+#define BF_ANADIG_REG_1P1_BO_OFFSET(v) \
+ (((v) << 4) & BM_ANADIG_REG_1P1_BO_OFFSET)
+#define BM_ANADIG_REG_1P1_ENABLE_PULLDOWN 0x00000008
+#define BM_ANADIG_REG_1P1_ENABLE_ILIMIT 0x00000004
+#define BM_ANADIG_REG_1P1_ENABLE_BO 0x00000002
+#define BM_ANADIG_REG_1P1_ENABLE_LINREG 0x00000001
+
+#define HW_ANADIG_REG_3P0 (0x00000120)
+#define HW_ANADIG_REG_3P0_SET (0x00000124)
+#define HW_ANADIG_REG_3P0_CLR (0x00000128)
+#define HW_ANADIG_REG_3P0_TOG (0x0000012c)
+
+#define BP_ANADIG_REG_3P0_RSVD2 18
+#define BM_ANADIG_REG_3P0_RSVD2 0xFFFC0000
+#define BF_ANADIG_REG_3P0_RSVD2(v) \
+ (((v) << 18) & BM_ANADIG_REG_3P0_RSVD2)
+#define BM_ANADIG_REG_3P0_OK_VDD3P0 0x00020000
+#define BM_ANADIG_REG_3P0_BO_VDD3P0 0x00010000
+#define BP_ANADIG_REG_3P0_RSVD1 13
+#define BM_ANADIG_REG_3P0_RSVD1 0x0000E000
+#define BF_ANADIG_REG_3P0_RSVD1(v) \
+ (((v) << 13) & BM_ANADIG_REG_3P0_RSVD1)
+#define BP_ANADIG_REG_3P0_OUTPUT_TRG 8
+#define BM_ANADIG_REG_3P0_OUTPUT_TRG 0x00001F00
+#define BF_ANADIG_REG_3P0_OUTPUT_TRG(v) \
+ (((v) << 8) & BM_ANADIG_REG_3P0_OUTPUT_TRG)
+#define BM_ANADIG_REG_3P0_VBUS_SEL 0x00000080
+#define BP_ANADIG_REG_3P0_BO_OFFSET 4
+#define BM_ANADIG_REG_3P0_BO_OFFSET 0x00000070
+#define BF_ANADIG_REG_3P0_BO_OFFSET(v) \
+ (((v) << 4) & BM_ANADIG_REG_3P0_BO_OFFSET)
+#define BM_ANADIG_REG_3P0_RSVD0 0x00000008
+#define BM_ANADIG_REG_3P0_ENABLE_ILIMIT 0x00000004
+#define BM_ANADIG_REG_3P0_ENABLE_BO 0x00000002
+#define BM_ANADIG_REG_3P0_ENABLE_LINREG 0x00000001
+
+#define HW_ANADIG_REG_2P5 (0x00000130)
+#define HW_ANADIG_REG_2P5_SET (0x00000134)
+#define HW_ANADIG_REG_2P5_CLR (0x00000138)
+#define HW_ANADIG_REG_2P5_TOG (0x0000013c)
+
+#define BP_ANADIG_REG_2P5_RSVD2 19
+#define BM_ANADIG_REG_2P5_RSVD2 0xFFF80000
+#define BF_ANADIG_REG_2P5_RSVD2(v) \
+ (((v) << 19) & BM_ANADIG_REG_2P5_RSVD2)
+#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x00040000
+#define BM_ANADIG_REG_2P5_OK_VDD2P5 0x00020000
+#define BM_ANADIG_REG_2P5_BO_VDD2P5 0x00010000
+#define BP_ANADIG_REG_2P5_RSVD1 13
+#define BM_ANADIG_REG_2P5_RSVD1 0x0000E000
+#define BF_ANADIG_REG_2P5_RSVD1(v) \
+ (((v) << 13) & BM_ANADIG_REG_2P5_RSVD1)
+#define BP_ANADIG_REG_2P5_OUTPUT_TRG 8
+#define BM_ANADIG_REG_2P5_OUTPUT_TRG 0x00001F00
+#define BF_ANADIG_REG_2P5_OUTPUT_TRG(v) \
+ (((v) << 8) & BM_ANADIG_REG_2P5_OUTPUT_TRG)
+#define BM_ANADIG_REG_2P5_RSVD0 0x00000080
+#define BP_ANADIG_REG_2P5_BO_OFFSET 4
+#define BM_ANADIG_REG_2P5_BO_OFFSET 0x00000070
+#define BF_ANADIG_REG_2P5_BO_OFFSET(v) \
+ (((v) << 4) & BM_ANADIG_REG_2P5_BO_OFFSET)
+#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x00000008
+#define BM_ANADIG_REG_2P5_ENABLE_ILIMIT 0x00000004
+#define BM_ANADIG_REG_2P5_ENABLE_BO 0x00000002
+#define BM_ANADIG_REG_2P5_ENABLE_LINREG 0x00000001
+
+#define HW_ANADIG_REG_CORE (0x00000140)
+#define HW_ANADIG_REG_CORE_SET (0x00000144)
+#define HW_ANADIG_REG_CORE_CLR (0x00000148)
+#define HW_ANADIG_REG_CORE_TOG (0x0000014c)
+
+#define BM_ANADIG_REG_CORE_REF_SHIFT 0x80000000
+#define BM_ANADIG_REG_CORE_RSVD0 0x40000000
+#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000
+#define BP_ANADIG_REG_CORE_RAMP_RATE 27
+#define BM_ANADIG_REG_CORE_RAMP_RATE 0x18000000
+#define BF_ANADIG_REG_CORE_RAMP_RATE(v) \
+ (((v) << 27) & BM_ANADIG_REG_CORE_RAMP_RATE)
+#define BP_ANADIG_REG_CORE_REG2_ADJ 23
+#define BM_ANADIG_REG_CORE_REG2_ADJ 0x07800000
+#define BF_ANADIG_REG_CORE_REG2_ADJ(v) \
+ (((v) << 23) & BM_ANADIG_REG_CORE_REG2_ADJ)
+#define BP_ANADIG_REG_CORE_REG2_TRG 18
+#define BM_ANADIG_REG_CORE_REG2_TRG 0x007C0000
+#define BF_ANADIG_REG_CORE_REG2_TRG(v) \
+ (((v) << 18) & BM_ANADIG_REG_CORE_REG2_TRG)
+#define BP_ANADIG_REG_CORE_REG1_ADJ 14
+#define BM_ANADIG_REG_CORE_REG1_ADJ 0x0003C000
+#define BF_ANADIG_REG_CORE_REG1_ADJ(v) \
+ (((v) << 14) & BM_ANADIG_REG_CORE_REG1_ADJ)
+#define BP_ANADIG_REG_CORE_REG1_TRG 9
+#define BM_ANADIG_REG_CORE_REG1_TRG 0x00003E00
+#define BF_ANADIG_REG_CORE_REG1_TRG(v) \
+ (((v) << 9) & BM_ANADIG_REG_CORE_REG1_TRG)
+#define BP_ANADIG_REG_CORE_REG0_ADJ 5
+#define BM_ANADIG_REG_CORE_REG0_ADJ 0x000001E0
+#define BF_ANADIG_REG_CORE_REG0_ADJ(v) \
+ (((v) << 5) & BM_ANADIG_REG_CORE_REG0_ADJ)
+#define BP_ANADIG_REG_CORE_REG0_TRG 0
+#define BM_ANADIG_REG_CORE_REG0_TRG 0x0000001F
+#define BF_ANADIG_REG_CORE_REG0_TRG(v) \
+ (((v) << 0) & BM_ANADIG_REG_CORE_REG0_TRG)
+
+#define HW_ANADIG_ANA_MISC0 (0x00000150)
+#define HW_ANADIG_ANA_MISC0_SET (0x00000154)
+#define HW_ANADIG_ANA_MISC0_CLR (0x00000158)
+#define HW_ANADIG_ANA_MISC0_TOG (0x0000015c)
+
+#define BP_ANADIG_ANA_MISC0_RSVD2 29
+#define BM_ANADIG_ANA_MISC0_RSVD2 0xE0000000
+#define BF_ANADIG_ANA_MISC0_RSVD2(v) \
+ (((v) << 29) & BM_ANADIG_ANA_MISC0_RSVD2)
+#define BP_ANADIG_ANA_MISC0_CLKGATE_DELAY 26
+#define BM_ANADIG_ANA_MISC0_CLKGATE_DELAY 0x1C000000
+#define BF_ANADIG_ANA_MISC0_CLKGATE_DELAY(v) \
+ (((v) << 26) & BM_ANADIG_ANA_MISC0_CLKGATE_DELAY)
+#define BM_ANADIG_ANA_MISC0_CLKGATE_CTRL 0x02000000
+#define BP_ANADIG_ANA_MISC0_ANAMUX 21
+#define BM_ANADIG_ANA_MISC0_ANAMUX 0x01E00000
+#define BF_ANADIG_ANA_MISC0_ANAMUX(v) \
+ (((v) << 21) & BM_ANADIG_ANA_MISC0_ANAMUX)
+#define BM_ANADIG_ANA_MISC0_ANAMUX_EN 0x00100000
+#define BP_ANADIG_ANA_MISC0_WBCP_VPW_THRESH 18
+#define BM_ANADIG_ANA_MISC0_WBCP_VPW_THRESH 0x000C0000
+#define BF_ANADIG_ANA_MISC0_WBCP_VPW_THRESH(v) \
+ (((v) << 18) & BM_ANADIG_ANA_MISC0_WBCP_VPW_THRESH)
+#define BM_ANADIG_ANA_MISC0_OSC_XTALOK_EN 0x00020000
+#define BM_ANADIG_ANA_MISC0_OSC_XTALOK 0x00010000
+#define BP_ANADIG_ANA_MISC0_OSC_I 14
+#define BM_ANADIG_ANA_MISC0_OSC_I 0x0000C000
+#define BF_ANADIG_ANA_MISC0_OSC_I(v) \
+ (((v) << 14) & BM_ANADIG_ANA_MISC0_OSC_I)
+#define BM_ANADIG_ANA_MISC0_RTC_RINGOSC_EN 0x00002000
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x00001000
+#define BP_ANADIG_ANA_MISC0_RSVD0 10
+#define BM_ANADIG_ANA_MISC0_RSVD0 0x00000C00
+#define BF_ANADIG_ANA_MISC0_RSVD0(v) \
+ (((v) << 10) & BM_ANADIG_ANA_MISC0_RSVD0)
+#define BP_ANADIG_ANA_MISC0_REFTOP_BIAS_TST 8
+#define BM_ANADIG_ANA_MISC0_REFTOP_BIAS_TST 0x00000300
+#define BF_ANADIG_ANA_MISC0_REFTOP_BIAS_TST(v) \
+ (((v) << 8) & BM_ANADIG_ANA_MISC0_REFTOP_BIAS_TST)
+#define BM_ANADIG_ANA_MISC0_REFTOP_VBGUP 0x00000080
+#define BP_ANADIG_ANA_MISC0_REFTOP_VBGADJ 4
+#define BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ 0x00000070
+#define BF_ANADIG_ANA_MISC0_REFTOP_VBGADJ(v) \
+ (((v) << 4) & BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ)
+#define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008
+#define BM_ANADIG_ANA_MISC0_REFTOP_LOWPOWER 0x00000004
+#define BM_ANADIG_ANA_MISC0_REFTOP_PWDVBGUP 0x00000002
+#define BM_ANADIG_ANA_MISC0_REFTOP_PWD 0x00000001
+
+#define HW_ANADIG_ANA_MISC1 (0x00000160)
+#define HW_ANADIG_ANA_MISC1_SET (0x00000164)
+#define HW_ANADIG_ANA_MISC1_CLR (0x00000168)
+#define HW_ANADIG_ANA_MISC1_TOG (0x0000016c)
+
+#define BM_ANADIG_ANA_MISC1_IRQ_DIG_BO 0x80000000
+#define BM_ANADIG_ANA_MISC1_IRQ_ANA_BO 0x40000000
+#define BM_ANADIG_ANA_MISC1_IRQ_TEMPSENSE_BO 0x20000000
+#define BP_ANADIG_ANA_MISC1_RSVD0 14
+#define BM_ANADIG_ANA_MISC1_RSVD0 0x1FFFC000
+#define BF_ANADIG_ANA_MISC1_RSVD0(v) \
+ (((v) << 14) & BM_ANADIG_ANA_MISC1_RSVD0)
+#define BM_ANADIG_ANA_MISC1_LVDSCLK2_IBEN 0x00002000
+#define BM_ANADIG_ANA_MISC1_LVDSCLK1_IBEN 0x00001000
+#define BM_ANADIG_ANA_MISC1_LVDSCLK2_OBEN 0x00000800
+#define BM_ANADIG_ANA_MISC1_LVDSCLK1_OBEN 0x00000400
+#define BP_ANADIG_ANA_MISC1_LVDS2_CLK_SEL 5
+#define BM_ANADIG_ANA_MISC1_LVDS2_CLK_SEL 0x000003E0
+#define BF_ANADIG_ANA_MISC1_LVDS2_CLK_SEL(v) \
+ (((v) << 5) & BM_ANADIG_ANA_MISC1_LVDS2_CLK_SEL)
+#define BP_ANADIG_ANA_MISC1_LVDS1_CLK_SEL 0
+#define BM_ANADIG_ANA_MISC1_LVDS1_CLK_SEL 0x0000001F
+#define BF_ANADIG_ANA_MISC1_LVDS1_CLK_SEL(v) \
+ (((v) << 0) & BM_ANADIG_ANA_MISC1_LVDS1_CLK_SEL)
+
+#define HW_ANADIG_ANA_MISC2 (0x00000170)
+#define HW_ANADIG_ANA_MISC2_SET (0x00000174)
+#define HW_ANADIG_ANA_MISC2_CLR (0x00000178)
+#define HW_ANADIG_ANA_MISC2_TOG (0x0000017c)
+
+#define BP_ANADIG_ANA_MISC2_CONTROL3 30
+#define BM_ANADIG_ANA_MISC2_CONTROL3 0xC0000000
+#define BF_ANADIG_ANA_MISC2_CONTROL3(v) \
+ (((v) << 30) & BM_ANADIG_ANA_MISC2_CONTROL3)
+#define BP_ANADIG_ANA_MISC2_REG2_STEP_TIME 28
+#define BM_ANADIG_ANA_MISC2_REG2_STEP_TIME 0x30000000
+#define BF_ANADIG_ANA_MISC2_REG2_STEP_TIME(v) \
+ (((v) << 28) & BM_ANADIG_ANA_MISC2_REG2_STEP_TIME)
+#define BP_ANADIG_ANA_MISC2_REG1_STEP_TIME 26
+#define BM_ANADIG_ANA_MISC2_REG1_STEP_TIME 0x0C000000
+#define BF_ANADIG_ANA_MISC2_REG1_STEP_TIME(v) \
+ (((v) << 26) & BM_ANADIG_ANA_MISC2_REG1_STEP_TIME)
+#define BP_ANADIG_ANA_MISC2_REG0_STEP_TIME 24
+#define BM_ANADIG_ANA_MISC2_REG0_STEP_TIME 0x03000000
+#define BF_ANADIG_ANA_MISC2_REG0_STEP_TIME(v) \
+ (((v) << 24) & BM_ANADIG_ANA_MISC2_REG0_STEP_TIME)
+#define BM_ANADIG_ANA_MISC2_CONTROL2 0x00800000
+#define BM_ANADIG_ANA_MISC2_REG2_OK 0x00400000
+#define BM_ANADIG_ANA_MISC2_REG2_ENABLE_BO 0x00200000
+#define BM_ANADIG_ANA_MISC2_RSVD2 0x00100000
+#define BM_ANADIG_ANA_MISC2_REG2_BO_STATUS 0x00080000
+#define BP_ANADIG_ANA_MISC2_REG2_BO_OFFSET 16
+#define BM_ANADIG_ANA_MISC2_REG2_BO_OFFSET 0x00070000
+#define BF_ANADIG_ANA_MISC2_REG2_BO_OFFSET(v) \
+ (((v) << 16) & BM_ANADIG_ANA_MISC2_REG2_BO_OFFSET)
+#define BM_ANADIG_ANA_MISC2_CONTROL1 0x00008000
+#define BM_ANADIG_ANA_MISC2_REG1_OK 0x00004000
+#define BM_ANADIG_ANA_MISC2_REG1_ENABLE_BO 0x00002000
+#define BM_ANADIG_ANA_MISC2_RSVD1 0x00001000
+#define BM_ANADIG_ANA_MISC2_REG1_BO_STATUS 0x00000800
+#define BP_ANADIG_ANA_MISC2_REG1_BO_OFFSET 8
+#define BM_ANADIG_ANA_MISC2_REG1_BO_OFFSET 0x00000700
+#define BF_ANADIG_ANA_MISC2_REG1_BO_OFFSET(v) \
+ (((v) << 8) & BM_ANADIG_ANA_MISC2_REG1_BO_OFFSET)
+#define BM_ANADIG_ANA_MISC2_CONTROL0 0x00000080
+#define BM_ANADIG_ANA_MISC2_REG0_OK 0x00000040
+#define BM_ANADIG_ANA_MISC2_REG0_ENABLE_BO 0x00000020
+#define BM_ANADIG_ANA_MISC2_RSVD0 0x00000010
+#define BM_ANADIG_ANA_MISC2_REG0_BO_STATUS 0x00000008
+#define BP_ANADIG_ANA_MISC2_REG0_BO_OFFSET 0
+#define BM_ANADIG_ANA_MISC2_REG0_BO_OFFSET 0x00000007
+#define BF_ANADIG_ANA_MISC2_REG0_BO_OFFSET(v) \
+ (((v) << 0) & BM_ANADIG_ANA_MISC2_REG0_BO_OFFSET)
+
+#define HW_ANADIG_TEMPSENSE0 (0x00000180)
+#define HW_ANADIG_TEMPSENSE0_SET (0x00000184)
+#define HW_ANADIG_TEMPSENSE0_CLR (0x00000188)
+#define HW_ANADIG_TEMPSENSE0_TOG (0x0000018c)
+
+#define BP_ANADIG_TEMPSENSE0_ALARM_VALUE 20
+#define BM_ANADIG_TEMPSENSE0_ALARM_VALUE 0xFFF00000
+#define BF_ANADIG_TEMPSENSE0_ALARM_VALUE(v) \
+ (((v) << 20) & BM_ANADIG_TEMPSENSE0_ALARM_VALUE)
+#define BP_ANADIG_TEMPSENSE0_TEMP_VALUE 8
+#define BM_ANADIG_TEMPSENSE0_TEMP_VALUE 0x000FFF00
+#define BF_ANADIG_TEMPSENSE0_TEMP_VALUE(v) \
+ (((v) << 8) & BM_ANADIG_TEMPSENSE0_TEMP_VALUE)
+#define BM_ANADIG_TEMPSENSE0_RSVD0 0x00000080
+#define BM_ANADIG_TEMPSENSE0_TEST 0x00000040
+#define BP_ANADIG_TEMPSENSE0_VBGADJ 3
+#define BM_ANADIG_TEMPSENSE0_VBGADJ 0x00000038
+#define BF_ANADIG_TEMPSENSE0_VBGADJ(v) \
+ (((v) << 3) & BM_ANADIG_TEMPSENSE0_VBGADJ)
+#define BM_ANADIG_TEMPSENSE0_FINISHED 0x00000004
+#define BM_ANADIG_TEMPSENSE0_MEASURE_TEMP 0x00000002
+#define BM_ANADIG_TEMPSENSE0_POWER_DOWN 0x00000001
+
+#define HW_ANADIG_TEMPSENSE1 (0x00000190)
+#define HW_ANADIG_TEMPSENSE1_SET (0x00000194)
+#define HW_ANADIG_TEMPSENSE1_CLR (0x00000198)
+#define HW_ANADIG_TEMPSENSE1_TOG (0x0000019c)
+
+#define BP_ANADIG_TEMPSENSE1_RSVD0 16
+#define BM_ANADIG_TEMPSENSE1_RSVD0 0xFFFF0000
+#define BF_ANADIG_TEMPSENSE1_RSVD0(v) \
+ (((v) << 16) & BM_ANADIG_TEMPSENSE1_RSVD0)
+#define BP_ANADIG_TEMPSENSE1_MEASURE_FREQ 0
+#define BM_ANADIG_TEMPSENSE1_MEASURE_FREQ 0x0000FFFF
+#define BF_ANADIG_TEMPSENSE1_MEASURE_FREQ(v) \
+ (((v) << 0) & BM_ANADIG_TEMPSENSE1_MEASURE_FREQ)
+
+#define HW_ANADIG_USB1_VBUS_DETECT (0x000001a0)
+#define HW_ANADIG_USB1_VBUS_DETECT_SET (0x000001a4)
+#define HW_ANADIG_USB1_VBUS_DETECT_CLR (0x000001a8)
+#define HW_ANADIG_USB1_VBUS_DETECT_TOG (0x000001ac)
+
+#define BM_ANADIG_USB1_VBUS_DETECT_EN_CHARGER_RESISTOR 0x80000000
+#define BP_ANADIG_USB1_VBUS_DETECT_RSVD2 28
+#define BM_ANADIG_USB1_VBUS_DETECT_RSVD2 0x70000000
+#define BF_ANADIG_USB1_VBUS_DETECT_RSVD2(v) \
+ (((v) << 28) & BM_ANADIG_USB1_VBUS_DETECT_RSVD2)
+#define BM_ANADIG_USB1_VBUS_DETECT_CHARGE_VBUS 0x08000000
+#define BM_ANADIG_USB1_VBUS_DETECT_DISCHARGE_VBUS 0x04000000
+#define BP_ANADIG_USB1_VBUS_DETECT_RSVD1 21
+#define BM_ANADIG_USB1_VBUS_DETECT_RSVD1 0x03E00000
+#define BF_ANADIG_USB1_VBUS_DETECT_RSVD1(v) \
+ (((v) << 21) & BM_ANADIG_USB1_VBUS_DETECT_RSVD1)
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS 0x00100000
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_5VDETECT 0x00080000
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_TO_B 0x00040000
+#define BP_ANADIG_USB1_VBUS_DETECT_RSVD0 8
+#define BM_ANADIG_USB1_VBUS_DETECT_RSVD0 0x0003FF00
+#define BF_ANADIG_USB1_VBUS_DETECT_RSVD0(v) \
+ (((v) << 8) & BM_ANADIG_USB1_VBUS_DETECT_RSVD0)
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_OVERRIDE 0x00000080
+#define BM_ANADIG_USB1_VBUS_DETECT_AVALID_OVERRIDE 0x00000040
+#define BM_ANADIG_USB1_VBUS_DETECT_BVALID_OVERRIDE 0x00000020
+#define BM_ANADIG_USB1_VBUS_DETECT_SESSEND_OVERRIDE 0x00000010
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUS_OVERRIDE_EN 0x00000008
+#define BP_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH 0
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH 0x00000007
+#define BF_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH(v) \
+ (((v) << 0) & BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH)
+
+#define HW_ANADIG_USB1_CHRG_DETECT (0x000001b0)
+#define HW_ANADIG_USB1_CHRG_DETECT_SET (0x000001b4)
+#define HW_ANADIG_USB1_CHRG_DETECT_CLR (0x000001b8)
+#define HW_ANADIG_USB1_CHRG_DETECT_TOG (0x000001bc)
+
+#define BP_ANADIG_USB1_CHRG_DETECT_RSVD2 24
+#define BM_ANADIG_USB1_CHRG_DETECT_RSVD2 0xFF000000
+#define BF_ANADIG_USB1_CHRG_DETECT_RSVD2(v) \
+ (((v) << 24) & BM_ANADIG_USB1_CHRG_DETECT_RSVD2)
+#define BM_ANADIG_USB1_CHRG_DETECT_BGR_BIAS 0x00800000
+#define BP_ANADIG_USB1_CHRG_DETECT_RSVD1 21
+#define BM_ANADIG_USB1_CHRG_DETECT_RSVD1 0x00600000
+#define BF_ANADIG_USB1_CHRG_DETECT_RSVD1(v) \
+ (((v) << 21) & BM_ANADIG_USB1_CHRG_DETECT_RSVD1)
+#define BM_ANADIG_USB1_CHRG_DETECT_EN_B 0x00100000
+#define BM_ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B 0x00080000
+#define BM_ANADIG_USB1_CHRG_DETECT_CHK_CONTACT 0x00040000
+#define BP_ANADIG_USB1_CHRG_DETECT_RSVD0 1
+#define BM_ANADIG_USB1_CHRG_DETECT_RSVD0 0x0003FFFE
+#define BF_ANADIG_USB1_CHRG_DETECT_RSVD0(v) \
+ (((v) << 1) & BM_ANADIG_USB1_CHRG_DETECT_RSVD0)
+#define BM_ANADIG_USB1_CHRG_DETECT_FORCE_DETECT 0x00000001
+
+#define HW_ANADIG_USB1_VBUS_DET_STAT (0x000001c0)
+#define HW_ANADIG_USB1_VBUS_DET_STAT_SET (0x000001c4)
+#define HW_ANADIG_USB1_VBUS_DET_STAT_CLR (0x000001c8)
+#define HW_ANADIG_USB1_VBUS_DET_STAT_TOG (0x000001cc)
+
+#define BP_ANADIG_USB1_VBUS_DET_STAT_RSVD0 4
+#define BM_ANADIG_USB1_VBUS_DET_STAT_RSVD0 0xFFFFFFF0
+#define BF_ANADIG_USB1_VBUS_DET_STAT_RSVD0(v) \
+ (((v) << 4) & BM_ANADIG_USB1_VBUS_DET_STAT_RSVD0)
+#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID 0x00000008
+#define BM_ANADIG_USB1_VBUS_DET_STAT_AVALID 0x00000004
+#define BM_ANADIG_USB1_VBUS_DET_STAT_BVALID 0x00000002
+#define BM_ANADIG_USB1_VBUS_DET_STAT_SESSEND 0x00000001
+
+#define HW_ANADIG_USB1_CHRG_DET_STAT (0x000001d0)
+#define HW_ANADIG_USB1_CHRG_DET_STAT_SET (0x000001d4)
+#define HW_ANADIG_USB1_CHRG_DET_STAT_CLR (0x000001d8)
+#define HW_ANADIG_USB1_CHRG_DET_STAT_TOG (0x000001dc)
+
+#define BP_ANADIG_USB1_CHRG_DET_STAT_RSVD0 4
+#define BM_ANADIG_USB1_CHRG_DET_STAT_RSVD0 0xFFFFFFF0
+#define BF_ANADIG_USB1_CHRG_DET_STAT_RSVD0(v) \
+ (((v) << 4) & BM_ANADIG_USB1_CHRG_DET_STAT_RSVD0)
+#define BM_ANADIG_USB1_CHRG_DET_STAT_DP_STATE 0x00000008
+#define BM_ANADIG_USB1_CHRG_DET_STAT_DM_STATE 0x00000004
+#define BM_ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED 0x00000002
+#define BM_ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT 0x00000001
+
+#define HW_ANADIG_USB1_LOOPBACK (0x000001e0)
+#define HW_ANADIG_USB1_LOOPBACK_SET (0x000001e4)
+#define HW_ANADIG_USB1_LOOPBACK_CLR (0x000001e8)
+#define HW_ANADIG_USB1_LOOPBACK_TOG (0x000001ec)
+
+#define BP_ANADIG_USB1_LOOPBACK_RSVD0 9
+#define BM_ANADIG_USB1_LOOPBACK_RSVD0 0xFFFFFE00
+#define BF_ANADIG_USB1_LOOPBACK_RSVD0(v) \
+ (((v) << 9) & BM_ANADIG_USB1_LOOPBACK_RSVD0)
+#define BM_ANADIG_USB1_LOOPBACK_UTMO_DIG_TST1 0x00000100
+#define BM_ANADIG_USB1_LOOPBACK_UTMO_DIG_TST0 0x00000080
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_HIZ 0x00000040
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN 0x00000020
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_LS_MODE 0x00000010
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_HS_MODE 0x00000008
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 0x00000004
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST0 0x00000002
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_TESTSTART 0x00000001
+
+#define HW_ANADIG_USB1_MISC (0x000001f0)
+#define HW_ANADIG_USB1_MISC_SET (0x000001f4)
+#define HW_ANADIG_USB1_MISC_CLR (0x000001f8)
+#define HW_ANADIG_USB1_MISC_TOG (0x000001fc)
+
+#define BM_ANADIG_USB1_MISC_RSVD1 0x80000000
+#define BM_ANADIG_USB1_MISC_EN_CLK_UTMI 0x40000000
+#define BM_ANADIG_USB1_MISC_RX_VPIN_FS 0x20000000
+#define BM_ANADIG_USB1_MISC_RX_VMIN_FS 0x10000000
+#define BM_ANADIG_USB1_MISC_RX_RXD_FS 0x08000000
+#define BM_ANADIG_USB1_MISC_RX_SQUELCH 0x04000000
+#define BM_ANADIG_USB1_MISC_RX_DISCON_DET 0x02000000
+#define BM_ANADIG_USB1_MISC_RX_HS_DATA 0x01000000
+#define BP_ANADIG_USB1_MISC_RSVD0 2
+#define BM_ANADIG_USB1_MISC_RSVD0 0x00FFFFFC
+#define BF_ANADIG_USB1_MISC_RSVD0(v) \
+ (((v) << 2) & BM_ANADIG_USB1_MISC_RSVD0)
+#define BM_ANADIG_USB1_MISC_EN_DEGLITCH 0x00000002
+#define BM_ANADIG_USB1_MISC_HS_USE_EXTERNAL_R 0x00000001
+
+#define HW_ANADIG_USB2_VBUS_DETECT (0x00000200)
+#define HW_ANADIG_USB2_VBUS_DETECT_SET (0x00000204)
+#define HW_ANADIG_USB2_VBUS_DETECT_CLR (0x00000208)
+#define HW_ANADIG_USB2_VBUS_DETECT_TOG (0x0000020c)
+
+#define BM_ANADIG_USB2_VBUS_DETECT_EN_CHARGER_RESISTOR 0x80000000
+#define BP_ANADIG_USB2_VBUS_DETECT_RSVD2 28
+#define BM_ANADIG_USB2_VBUS_DETECT_RSVD2 0x70000000
+#define BF_ANADIG_USB2_VBUS_DETECT_RSVD2(v) \
+ (((v) << 28) & BM_ANADIG_USB2_VBUS_DETECT_RSVD2)
+#define BM_ANADIG_USB2_VBUS_DETECT_CHARGE_VBUS 0x08000000
+#define BM_ANADIG_USB2_VBUS_DETECT_DISCHARGE_VBUS 0x04000000
+#define BP_ANADIG_USB2_VBUS_DETECT_RSVD1 21
+#define BM_ANADIG_USB2_VBUS_DETECT_RSVD1 0x03E00000
+#define BF_ANADIG_USB2_VBUS_DETECT_RSVD1(v) \
+ (((v) << 21) & BM_ANADIG_USB2_VBUS_DETECT_RSVD1)
+#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS 0x00100000
+#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_5VDETECT 0x00080000
+#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_TO_B 0x00040000
+#define BP_ANADIG_USB2_VBUS_DETECT_RSVD0 3
+#define BM_ANADIG_USB2_VBUS_DETECT_RSVD0 0x0003FFF8
+#define BF_ANADIG_USB2_VBUS_DETECT_RSVD0(v) \
+ (((v) << 3) & BM_ANADIG_USB2_VBUS_DETECT_RSVD0)
+#define BP_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH 0
+#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH 0x00000007
+#define BF_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH(v) \
+ (((v) << 0) & BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH)
+
+#define HW_ANADIG_USB2_CHRG_DETECT (0x00000210)
+#define HW_ANADIG_USB2_CHRG_DETECT_SET (0x00000214)
+#define HW_ANADIG_USB2_CHRG_DETECT_CLR (0x00000218)
+#define HW_ANADIG_USB2_CHRG_DETECT_TOG (0x0000021c)
+
+#define BP_ANADIG_USB2_CHRG_DETECT_RSVD2 24
+#define BM_ANADIG_USB2_CHRG_DETECT_RSVD2 0xFF000000
+#define BF_ANADIG_USB2_CHRG_DETECT_RSVD2(v) \
+ (((v) << 24) & BM_ANADIG_USB2_CHRG_DETECT_RSVD2)
+#define BM_ANADIG_USB2_CHRG_DETECT_BGR_BIAS 0x00800000
+#define BP_ANADIG_USB2_CHRG_DETECT_RSVD1 21
+#define BM_ANADIG_USB2_CHRG_DETECT_RSVD1 0x00600000
+#define BF_ANADIG_USB2_CHRG_DETECT_RSVD1(v) \
+ (((v) << 21) & BM_ANADIG_USB2_CHRG_DETECT_RSVD1)
+#define BM_ANADIG_USB2_CHRG_DETECT_EN_B 0x00100000
+#define BM_ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B 0x00080000
+#define BM_ANADIG_USB2_CHRG_DETECT_CHK_CONTACT 0x00040000
+#define BP_ANADIG_USB2_CHRG_DETECT_RSVD0 1
+#define BM_ANADIG_USB2_CHRG_DETECT_RSVD0 0x0003FFFE
+#define BF_ANADIG_USB2_CHRG_DETECT_RSVD0(v) \
+ (((v) << 1) & BM_ANADIG_USB2_CHRG_DETECT_RSVD0)
+#define BM_ANADIG_USB2_CHRG_DETECT_FORCE_DETECT 0x00000001
+
+#define HW_ANADIG_USB2_VBUS_DET_STAT (0x00000220)
+#define HW_ANADIG_USB2_VBUS_DET_STAT_SET (0x00000224)
+#define HW_ANADIG_USB2_VBUS_DET_STAT_CLR (0x00000228)
+#define HW_ANADIG_USB2_VBUS_DET_STAT_TOG (0x0000022c)
+
+#define BP_ANADIG_USB2_VBUS_DET_STAT_RSVD0 4
+#define BM_ANADIG_USB2_VBUS_DET_STAT_RSVD0 0xFFFFFFF0
+#define BF_ANADIG_USB2_VBUS_DET_STAT_RSVD0(v) \
+ (((v) << 4) & BM_ANADIG_USB2_VBUS_DET_STAT_RSVD0)
+#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID 0x00000008
+#define BM_ANADIG_USB2_VBUS_DET_STAT_AVALID 0x00000004
+#define BM_ANADIG_USB2_VBUS_DET_STAT_BVALID 0x00000002
+#define BM_ANADIG_USB2_VBUS_DET_STAT_SESSEND 0x00000001
+
+#define HW_ANADIG_USB2_CHRG_DET_STAT (0x00000230)
+#define HW_ANADIG_USB2_CHRG_DET_STAT_SET (0x00000234)
+#define HW_ANADIG_USB2_CHRG_DET_STAT_CLR (0x00000238)
+#define HW_ANADIG_USB2_CHRG_DET_STAT_TOG (0x0000023c)
+
+#define BP_ANADIG_USB2_CHRG_DET_STAT_RSVD0 4
+#define BM_ANADIG_USB2_CHRG_DET_STAT_RSVD0 0xFFFFFFF0
+#define BF_ANADIG_USB2_CHRG_DET_STAT_RSVD0(v) \
+ (((v) << 4) & BM_ANADIG_USB2_CHRG_DET_STAT_RSVD0)
+#define BM_ANADIG_USB2_CHRG_DET_STAT_DP_STATE 0x00000008
+#define BM_ANADIG_USB2_CHRG_DET_STAT_DM_STATE 0x00000004
+#define BM_ANADIG_USB2_CHRG_DET_STAT_CHRG_DETECTED 0x00000002
+#define BM_ANADIG_USB2_CHRG_DET_STAT_PLUG_CONTACT 0x00000001
+
+#define HW_ANADIG_USB2_LOOPBACK (0x00000240)
+#define HW_ANADIG_USB2_LOOPBACK_SET (0x00000244)
+#define HW_ANADIG_USB2_LOOPBACK_CLR (0x00000248)
+#define HW_ANADIG_USB2_LOOPBACK_TOG (0x0000024c)
+
+#define BP_ANADIG_USB2_LOOPBACK_RSVD0 9
+#define BM_ANADIG_USB2_LOOPBACK_RSVD0 0xFFFFFE00
+#define BF_ANADIG_USB2_LOOPBACK_RSVD0(v) \
+ (((v) << 9) & BM_ANADIG_USB2_LOOPBACK_RSVD0)
+#define BM_ANADIG_USB2_LOOPBACK_UTMO_DIG_TST1 0x00000100
+#define BM_ANADIG_USB2_LOOPBACK_UTMO_DIG_TST0 0x00000080
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_HIZ 0x00000040
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN 0x00000020
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_LS_MODE 0x00000010
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_HS_MODE 0x00000008
+#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 0x00000004
+#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST0 0x00000002
+#define BM_ANADIG_USB2_LOOPBACK_UTMI_TESTSTART 0x00000001
+
+#define HW_ANADIG_USB2_MISC (0x00000250)
+#define HW_ANADIG_USB2_MISC_SET (0x00000254)
+#define HW_ANADIG_USB2_MISC_CLR (0x00000258)
+#define HW_ANADIG_USB2_MISC_TOG (0x0000025c)
+
+#define BM_ANADIG_USB2_MISC_RSVD1 0x80000000
+#define BM_ANADIG_USB2_MISC_EN_CLK_UTMI 0x40000000
+#define BM_ANADIG_USB2_MISC_RX_VPIN_FS 0x20000000
+#define BM_ANADIG_USB2_MISC_RX_VMIN_FS 0x10000000
+#define BM_ANADIG_USB2_MISC_RX_RXD_FS 0x08000000
+#define BM_ANADIG_USB2_MISC_RX_SQUELCH 0x04000000
+#define BM_ANADIG_USB2_MISC_RX_DISCON_DET 0x02000000
+#define BM_ANADIG_USB2_MISC_RX_HS_DATA 0x01000000
+#define BP_ANADIG_USB2_MISC_RSVD0 2
+#define BM_ANADIG_USB2_MISC_RSVD0 0x00FFFFFC
+#define BF_ANADIG_USB2_MISC_RSVD0(v) \
+ (((v) << 2) & BM_ANADIG_USB2_MISC_RSVD0)
+#define BM_ANADIG_USB2_MISC_EN_DEGLITCH 0x00000002
+#define BM_ANADIG_USB2_MISC_HS_USE_EXTERNAL_R 0x00000001
+
+#define HW_ANADIG_DIGPROG (0x00000260)
+
+#define BP_ANADIG_DIGPROG_RSVD 24
+#define BM_ANADIG_DIGPROG_RSVD 0xFF000000
+#define BF_ANADIG_DIGPROG_RSVD(v) \
+ (((v) << 24) & BM_ANADIG_DIGPROG_RSVD)
+#define BP_ANADIG_DIGPROG_MAJOR 8
+#define BM_ANADIG_DIGPROG_MAJOR 0x00FFFF00
+#define BF_ANADIG_DIGPROG_MAJOR(v) \
+ (((v) << 8) & BM_ANADIG_DIGPROG_MAJOR)
+#define BP_ANADIG_DIGPROG_MINOR 0
+#define BM_ANADIG_DIGPROG_MINOR 0x000000FF
+#define BF_ANADIG_DIGPROG_MINOR(v) \
+ (((v) << 0) & BM_ANADIG_DIGPROG_MINOR)
+
#endif /*__ARCH_ARM_MACH_MX6_CCM_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h
b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 2631beb..4b44095 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2011-2014 Freescale Semiconductor, Inc. All Rights Reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -587,6 +587,12 @@ struct fuse_bank0_regs {
u32 rsvd7[4];
};
+struct fuse_bank1_regs {
+ u32 mem[0x18];
+ u32 ana1;
+ u32 ana2;
+};
+
#ifdef CONFIG_MX6SX
struct fuse_bank4_regs {
u32 sjc_resp_low;
@@ -805,5 +811,6 @@ struct pwm_regs {
u32 pr;
u32 cnr;
};
+void check_cpu_temperature(void);
#endif /* __ASSEMBLER__*/
#endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
