For LS102xA, the initialized next_pbl_cmd should be the sum of
0x81000000, the lower 24 bits of CONFIG_SPL_TEXT_BASE and
CONFIG_SPL_MAX_SIZE(0x1a000). The sum is different from PowerPC.
The PBI CRC command is different from PowerPC too.
In pblimage tool, add the support for the above two issues.
Signed-off-by: Alison Wang <alison.w...@freescale.com>
---
tools/pblimage.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/tools/pblimage.c b/tools/pblimage.c
index 6e6e801..152678b 100644
--- a/tools/pblimage.c
+++ b/tools/pblimage.c
@@ -12,6 +12,10 @@
* Initialize to an invalid value.
*/
static uint32_t next_pbl_cmd = 0x82000000;
+static uint32_t pbl_cmd_initaddr = 0x82000000;
+static uint32_t pbi_crc_cmd1 = 0x13;
+static uint32_t pbi_crc_cmd2 = 0x80;
+
/*
* need to store all bytes in memory for calculating crc32, then write the
* bytes to image file for PBL boot.
@@ -49,7 +53,7 @@ static void init_next_pbl_cmd(FILE *fp_uboot)
exit(EXIT_FAILURE);
}
- next_pbl_cmd = 0x82000000 - st.st_size;
+ next_pbl_cmd = pbl_cmd_initaddr - st.st_size;
}
static void generate_pbl_cmd(void)
@@ -81,7 +85,7 @@ static void pbl_fget(size_t size, FILE *stream)
static void load_uboot(FILE *fp_uboot)
{
init_next_pbl_cmd(fp_uboot);
- while (next_pbl_cmd < 0x82000000) {
+ while (next_pbl_cmd < pbl_cmd_initaddr) {
generate_pbl_cmd();
pbl_fget(64, fp_uboot);
}
@@ -111,6 +115,14 @@ static void pbl_parser(char *name)
size_t len = 0;
fname = name;
+
+ if (strstr(fname, "ls102xa")) {
+ next_pbl_cmd = 0x8101a000;
+ pbl_cmd_initaddr = 0x8101a000;
+ pbi_crc_cmd1 = 0x61;
+ pbi_crc_cmd2 = 0;
+ }
+
fd = fopen(name, "r");
if (fd == NULL) {
printf("Error:%s - Can't open\n", fname);
@@ -172,8 +184,8 @@ static void add_end_cmd(void)
/* Add PBI CRC command. */
*pmem_buf++ = 0x08;
- *pmem_buf++ = 0x13;
- *pmem_buf++ = 0x80;
+ *pmem_buf++ = pbi_crc_cmd1;
+ *pmem_buf++ = pbi_crc_cmd2;
*pmem_buf++ = 0x40;
pbl_size += 4;
--
1.8.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
